Fastener kitset · Ultra G4
A bag or box of parts issued to the bench as one line.
CAS-140 · part FG-FAST-G4 · bay E1-02
What the rack holds, against what the plan will take
Twenty working days of the open build plan, in the order final assembly reaches for them.
On the rack
12
Plan will pull
18
0.9 a working day
Cover
13d
empty 11 Sep
Refill takes
3d
Sub-assembly
The reorder point is 9. There are 12 on the rack, so nothing flags it today.
That point was set against a much smaller build rate. The plan now pulls 0.9 a day off this bay, which empties it in 13 working days against a 3 day refill.
| Works order | Machine | Dealer | Needed | Takes | Left on the rack |
|---|---|---|---|---|---|
| WO-26-0404 | FencePro Ultra G4 · 4.5m hydraulic hinge | QuikFence Australia Pty Ltd | 26 Aug | 1 | 11 |
| WO-26-0412 | FencePro Mule V · 4.5m Activeblock | Gippsland Fencing Supplies Pty Ltd | 31 Aug | 1 | 10 |
| WO-26-0419 | FencePro Ultra G2S · 4.5m side mount | Otago Farm Machinery Ltd | 1 Sep | 1 | 9 |
| WO-26-0423 | FencePro Ultra G4 · 4.9m hydraulic hinge | Stevenson & Taylor Ltd | 2 Sep | 1 | 8 |
| WO-26-0421 | Hooper Pile Driver · 14t excavator mount | Fulton Hogan Ltd | 3 Sep | 2 | 6 |
| WO-26-0428 | Hooper Giant Disc · 3.0m clay drying | Ashburton Agri Ltd | 7 Sep | 2 | 4 |
| WO-26-0431 | FencePro Mule · 4.3m tractor mount | Horowhenua Machinery Ltd | 8 Sep | 2 | 2 |
| WO-26-0437 | FencePro Ultra G4 · 4.5m hydraulic hinge | QuikFence Australia Pty Ltd | 10 Sep | 1 | 1 |
| WO-26-0441 | FencePro Farmtek · 4.0m farmer model | Te Kuiti Fencing Supplies Ltd | 11 Sep | 3 | -2 |
| WO-26-0443 | FencePro RB800 · 180° rotating base | Nelson Agri Machinery Ltd | 14 Sep | 2 | -4 |
| WO-26-0438 | Hooper Pile Driver · 20t excavator mount | Central Queensland Civil Pty Ltd | 15 Sep | 2 | -6 |
The rack runs out at WO-26-0441, due 11 Sep 2026. Raising a refill today puts parts back on 28 Aug 2026.
The cassette
- Bay
- E1-02
- Bin holds
- 9 set
- Behaviour pattern
- B10 Kitset
- Made at
- Sub-assembly
- Rebuilt in batches of
- 60
- Owner
- Sarah Petersen
- Standard cost
- $86.40
- On the rack, at cost
- $1,037
One of these is made from
Rolled cost $249.61 against a standard of $86.40.
- Set screw · M12 × 50 · Gr 8.8 zinc HW-BOLT-M1250 · 685 on hand × 20
- Set screw · M16 × 80 · Gr 8.8 zinc HW-BOLT-M1680 · 192 on hand × 14
- Set screw · M20 × 100 · Gr 8.8 zinc HW-BOLT-M20100 · 136 on hand × 8
- Nyloc nut · M12 · Gr 8 zinc HW-NUT-M12 · 1,080 on hand × 20
- Nyloc nut · M16 · Gr 8 zinc HW-NUT-M16 · 1,640 on hand × 14
- Nyloc nut · M20 · Gr 8 zinc HW-NUT-M20 · 1,310 on hand × 8
- Flat washer · M12 · zinc HW-WASH-M12 · 1,760 on hand × 40
- Flat washer · M16 · zinc HW-WASH-M16 · 3,240 on hand × 28
- Spring washer · M16 · zinc HW-SPRW-M16 · 1,540 on hand × 14
- Grease nipple · M8 straight HW-GN-M8 · 1,690 on hand × 8
- Linch pin · 19mm HW-LPIN-19 · 520 on hand × 2
- Threadlocker · high strength 50ml HW-LOCT-270 · 28 on hand × 0.05
Refills
- Nothing raised against this cassette.