Pivot pin · 40 × 220 · hardened
Made in batches to a cassette. Lives in the supermarket.
CAS-109 · part FG-PIN-40220 · bay B1-02
What the rack holds, against what the plan will take
Twenty working days of the open build plan, in the order final assembly reaches for them.
On the rack
34
Plan will pull
52
2.6 a working day
Cover
13d
empty 11 Sep
Refill takes
4d
Machine Shop
The reorder point is 26. There are 34 on the rack, so nothing flags it today.
That point was set against a much smaller build rate. The plan now pulls 2.6 a day off this bay, which empties it in 13 working days against a 4 day refill.
| Works order | Machine | Dealer | Needed | Takes | Left on the rack |
|---|---|---|---|---|---|
| WO-26-0402 | Kinghitter Series 2i · 4.9m mast · 340kg | Cochranes of Canterbury Ltd | 26 Aug | 4 | 30 |
| WO-26-0404 | FencePro Ultra G4 · 4.5m hydraulic hinge | QuikFence Australia Pty Ltd | 26 Aug | 4 | 26 |
| WO-26-0418 | Kinghitter Series 2i · 4.5m mast · 320kg | Cochranes of Canterbury Ltd | 28 Aug | 4 | 22 |
| WO-26-0412 | FencePro Mule V · 4.5m Activeblock | Gippsland Fencing Supplies Pty Ltd | 31 Aug | 4 | 18 |
| WO-26-0414 | Kinghitter Series 2i · 4.5m mast · 320kg | Riverina Machinery Pty Ltd | 31 Aug | 8 | 10 |
| WO-26-0422 | Kinghitter Series 2i · 4.9m mast · 340kg | WA Ag Machinery Pty Ltd | 2 Sep | 4 | 6 |
| WO-26-0423 | FencePro Ultra G4 · 4.9m hydraulic hinge | Stevenson & Taylor Ltd | 2 Sep | 4 | 2 |
| WO-26-0429 | Kinghitter Series 2i · 4.5m mast · 320kg | Timaru Tractor Services Ltd | 4 Sep | 4 | -2 |
| WO-26-0442 | Kinghitter Expander · rock spike attachment | Manawatū Fencing Contractors Ltd | 9 Sep | 8 | -10 |
| WO-26-0437 | FencePro Ultra G4 · 4.5m hydraulic hinge | QuikFence Australia Pty Ltd | 10 Sep | 4 | -14 |
| WO-26-0444 | Kinghitter Series 2i · 4.5m mast · 320kg | Clutha Contracting Ltd | 15 Sep | 4 | -18 |
The rack runs out at WO-26-0429, due 4 Sep 2026. Raising a refill today puts parts back on 31 Aug 2026.
The cassette
- Bay
- B1-02
- Bin holds
- 26 ea
- Behaviour pattern
- B5 Cassette part
- Made at
- Machine Shop
- Rebuilt in batches of
- 160
- Owner
- Dave Lattimer
- Standard cost
- $44.60
- On the rack, at cost
- $1,516
One of these is made from
Rolled cost $10.03 against a standard of $44.60.
- EN8 bright bar · 40mm BI-BAR-EN8-40 · 252 on hand × 0.23
Refills
- Nothing raised against this cassette.