Hammer head · 340kg
Sub-assembly built to a cassette and held made-up.
CAS-104 · part FG-HEAD-340 · bay A1-04
What the rack holds, against what the plan will take
Twenty working days of the open build plan, in the order final assembly reaches for them.
On the rack
2
Plan will pull
7
0.3 a working day
Cover
5d
empty 1 Sep
Refill takes
6d
Sub-assembly
Below the reorder point of 3, so the existing rule flags it too.
That point was set against a much smaller build rate. The plan now pulls 0.3 a day off this bay, which empties it in 5 working days against a 6 day refill.
| Works order | Machine | Dealer | Needed | Takes | Left on the rack |
|---|---|---|---|---|---|
| WO-26-0402 | Kinghitter Series 2i · 4.9m mast · 340kg | Cochranes of Canterbury Ltd | 26 Aug | 1 | 1 |
| WO-26-0411 | Kinghitter Series 2i 360 · 4.9m mast | Delmade Pty Ltd | 31 Aug | 1 | 0 |
| WO-26-0422 | Kinghitter Series 2i · 4.9m mast · 340kg | WA Ag Machinery Pty Ltd | 2 Sep | 1 | -1 |
| WO-26-0423 | FencePro Ultra G4 · 4.9m hydraulic hinge | Stevenson & Taylor Ltd | 2 Sep | 1 | -2 |
| WO-26-0421 | Hooper Pile Driver · 14t excavator mount | Fulton Hogan Ltd | 3 Sep | 1 | -3 |
| WO-26-0438 | Hooper Pile Driver · 20t excavator mount | Central Queensland Civil Pty Ltd | 15 Sep | 2 | -5 |
The rack runs out at WO-26-0422, due 2 Sep 2026. Raising a refill today puts parts back on 2 Sep 2026.
The cassette
- Bay
- A1-04
- Bin holds
- 4 ea
- Behaviour pattern
- B6 Cassette assembly
- Made at
- Sub-assembly
- Rebuilt in batches of
- 10
- Owner
- Sarah Petersen
- Standard cost
- $1,188.00
- On the rack, at cost
- $2,376
One of these is made from
Rolled cost $1,551.96 against a standard of $1,188.00.
- Plate · 20mm Gr350 · 3000 × 1500 BI-PLATE-20 · 7,160 on hand × 342
- MIG wire · 1.2mm · 15kg spool BI-WIRE-MIG · 834 on hand × 5.6
Refills
- Nothing raised against this cassette.