Ultra G4 / UltraGlide Blocked CustomerMarlborough Ag Ltd
Serialassigned at QC sign-off
MastUltra G4
BaseUltraGlide RS
AttachmentsNone
Released16 Oct 2026
Final assembly18 Nov 2026
Promised to dealer19 Oct 2026
Convergence date
16 Dec 2026
The last sub-assembly is not ready until 16 Dec 2026, which is 20 working days after final assembly is scheduled to start on 18 Nov 2026. This machine cannot be built on its date.
Critical path
Valve bank assembly, Walvoil ActiveBlock
Not started, ready 16 Dec, needed 17 Nov
Onto the assembly bench 18 Dec 2026
Calculated completion 28 Dec 2026
Promised to dealer 19 Oct 2026
Production stages
Currently at stage 1 of 10 since 16 Oct 2026
- Released to production16 Oct
- Steel cut and prep19 Oct
- Fabrication and weld20 Oct
- Machining2 Nov
- Blast and paint5 Nov
- Hydraulic assembly11 Nov
- Final assembly18 Nov
- Test rig23 Nov
- QC sign-off24 Nov
- Ready for despatch25 Nov
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Ultra G4 mast weldment Mast weldment · 9 day build · SA-MW-ULTRAG4 | Not started | — | 0 / 23 | 17 Nov | 17 Nov | Fits, with 0 days to spare |
| UltraGlide RS base weldment Base weldment · 5 day build · SA-BW-UGRS | Not started | — | 0 / 16.3 | 17 Nov | 17 Nov | Fits, with 0 days to spare |
| Hydraulic pack, ActiveBlock Hydraulic pack · 2 day build · SA-HP-AB | Not started | — | 0 / 3 | 17 Nov | 17 Nov | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil ActiveBlock Valve bank · 1 day build · SA-VB-AB | Not started | — | 0 / 2 | 17 Nov | 16 Dec | 21 days late. Waiting on HY-VB-WV-AB to land 16 Dec. |
| Ram set, large mast Ram set · 1 day build · SA-RS-L | Not started | — | 0 / 1.5 | 17 Nov | 17 Nov | Fits, with 0 days to spare |
| Hose kit, large mast Hose kit · 1 day build · SA-HK-L | Not started | — | 0 / 2 | 17 Nov | 17 Nov | Fits, with 0 days to spare |
| Decal and document set, FP Decal set · 1 day build · SA-DS-FP | Not started | — | 0 / 0.5 | 17 Nov | 17 Nov | Fits, with 0 days to spare |
3 shortages against this machine
| Item | Short | Cover | |
|---|---|---|---|
| HY-HOSE-12-3600 Hose 2SN 12 dash, 3600mm, crimped both ends | 2 | nothing | |
| HY-RAM-SIDE-75 Side shift ram 75 x 900 | 1 | nothing | |
| HY-VB-WV-AB Walvoil ActiveBlock proportional module | 1 | 16 Dec |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $13,433
- Labour at standard, complete
- $3,234
- Hours booked
- 0 / 70.3
- Sold for
- $33,495
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
99 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| HY-HOSE-12-3600 Hose 2SN 12 dash, 3600mm, crimped both ends | Hose kit, large mast | 2 | 100 | 104 | 0 | 0 | — | 2 | |
| HY-RAM-SIDE-75 Side shift ram 75 x 900 | UltraGlide RS base weldment | 1 | 25 | 45 | 0 | 20 | — | 1 | |
| HY-VB-WV-AB Walvoil ActiveBlock proportional module | Valve bank assembly, Walvoil ActiveBlock | 1 | 15 | 27 | 0 | 21 | 16 Dec | 1 | |
| BR-SHEAVE-250 Rope sheave 250mm with bearing | Ultra G4 mast weldment | 2 | 84 | 80 | 4 | 28 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 44 | 14 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 162 | 44 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 326 | 98 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Ultra G4 mast weldment | 0.5 | 65 | 50.9 | 14.1 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 106 | 32 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Ultra G4 mast weldment | 7 | 983 | 770.5 | 212.5 | 1.1 | — | — | |
| DC-FP-ULTRAG4 FencePro Ultra G4 decal set | Decal and document set, FP | 1 | 42 | 61 | 0 | 35 | — | — | |
| DC-MANUAL-FP FencePro operator manual and parts book | Decal and document set, FP | 1 | 72 | 61 | 11 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, FP | 1 | 150 | 120 | 30 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, FP | 1 | 150 | 120 | 30 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 12.15 | 3.85 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 102 | 30 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 18 | 6 | 0 | — | — | |
| EL-LOOM-PROP Wiring loom, proportional control | Valve bank assembly, Walvoil ActiveBlock | 1 | 19 | 35 | 0 | 19 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 98 | 28 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 81 | 22 | 0 | — | — | |
| FB-UGRS-CARRIAGE UltraGlide shift carriage | UltraGlide RS base weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| FB-UGRS-FRAME UltraGlide base frame weldment | UltraGlide RS base weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| FB-UGRS-LINK UltraGlide linkage arm pair | UltraGlide RS base weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| FB-UGRS-MOUNT UltraGlide mast mount bracket | UltraGlide RS base weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| FB-UGRS-PINPL UltraGlide pin plate set 20mm | UltraGlide RS base weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| FB-UGRS-STAB UltraGlide stabiliser foot | UltraGlide RS base weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| FB-ULTRAG4-CARR Ultra G4 hammer carriage weldment | Ultra G4 mast weldment | 1 | 10 | 14 | 0 | 13 | — | — | |
| FB-ULTRAG4-FOOT Ultra G4 mast foot plate 20mm | Ultra G4 mast weldment | 1 | 22 | 14 | 8 | 0 | — | — | |
| FB-ULTRAG4-GUIDE Ultra G4 slide guide channel pair | Ultra G4 mast weldment | 1 | 22 | 14 | 8 | 0 | — | — | |
| FB-ULTRAG4-HEAD Ultra G4 mast head weld assembly | Ultra G4 mast weldment | 1 | 22 | 14 | 8 | 2 | — | — | |
| FB-ULTRAG4-LUG Ultra G4 lift lug set | Ultra G4 mast weldment | 2 | 44 | 28 | 16 | 0 | — | — | |
| FB-ULTRAG4-ROPEG Ultra G4 rope guide bracket | Ultra G4 mast weldment | 2 | 44 | 28 | 16 | 0 | — | — | |
| FB-ULTRAG4-STOP Ultra G4 carriage stop and buffer | Ultra G4 mast weldment | 2 | 44 | 28 | 16 | 0 | — | — | |
| FB-ULTRAG4-TOP Ultra G4 mast top plate, laser cut 16mm | Ultra G4 mast weldment | 1 | 22 | 14 | 8 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil ActiveBlock | 4 | 476 | 388 | 88 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 648 | 176 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Ultra G4 mast weldment | 12 | 1554 | 1218 | 336 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | UltraGlide RS base weldment | 8 | 920 | 744 | 176 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | UltraGlide RS base weldment | 1 | 109 | 87 | 22 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Ultra G4 mast weldment | 1 | 110 | 88 | 22 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil ActiveBlock | 4 | 476 | 388 | 88 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 1320 | 376 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Ultra G4 mast weldment | 12 | 1964 | 1532 | 432 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | UltraGlide RS base weldment | 8 | 920 | 744 | 176 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 1296 | 352 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Ultra G4 mast weldment | 24 | 2640 | 2112 | 528 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | UltraGlide RS base weldment | 16 | 1744 | 1392 | 352 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, large mast | 3 | 472.6 | 376.2 | 96.4 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, ActiveBlock | 1 | 129 | 105 | 24 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, large mast | 1 | 119 | 97 | 22 | 0 | — | — | |
| GS-MOUNT-RUB-75 Rubber mount 75mm, M16 | Hydraulic pack, ActiveBlock | 4 | 176 | 132 | 44 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, ActiveBlock | 4 | 635 | 509 | 126 | 0 | — | — | |
| HY-ACC-05 Accumulator 0.5L | Hydraulic pack, ActiveBlock | 1 | 47 | 35 | 12 | 0 | — | — | |
| HY-COOL-12V Oil cooler 12V, 8 plate | Hydraulic pack, ActiveBlock | 1 | 41 | 31 | 10 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, ActiveBlock | 1 | 141 | 113 | 28 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil ActiveBlock | 16 | 1872 | 1528 | 344 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, ActiveBlock | 6 | 586 | 474 | 112 | 2 | — | — | |
| HY-FIT-CBAL-08 Counterbalance valve 1/2 | Valve bank assembly, Walvoil ActiveBlock | 1 | 34 | 43 | 0 | 25 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, ActiveBlock | 9 | 651 | 521 | 130 | 1 | — | — | |
| HY-FIT-MANIF-4 Manifold block, 4 port | Hydraulic pack, ActiveBlock | 1 | 47 | 35 | 12 | 0 | — | — | |
| HY-FIT-QR-12 Quick release coupler 3/4 | Hose kit, large mast | 2 | 144 | 114 | 30 | 2 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil ActiveBlock | 1 | 131 | 105 | 26 | 0 | — | — | |
| HY-FIT-TEE-12 Tee 3/4 | Hose kit, large mast | 2 | 98 | 76 | 22 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 436 | 356 | 80 | 0 | — | — | |
| HY-HOSE-12-2400 Hose 2SN 12 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 210 | 162 | 48 | 0 | — | — | |
| HY-JOY-PROP Proportional joystick, ActiveBlock | Valve bank assembly, Walvoil ActiveBlock | 1 | 25 | 35 | 0 | 12 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, ActiveBlock | 30 | 4838 | 3820 | 1018 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, ActiveBlock | 1 | 141 | 113 | 28 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, large mast | 2 | 166 | 134 | 32 | 1 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, large mast | 1 | 111 | 90 | 21 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, ActiveBlock | 1 | 141 | 113 | 28 | 0 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 89 | 26 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 220 | 66 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | UltraGlide RS base weldment | 2 | 282 | 222 | 60 | 2 | — | — | |
| MC-BUSH-50 Bush 50 ID, bronze | Ultra G4 mast weldment | 4 | 224 | 200 | 24 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Ultra G4 mast weldment | 6 | 548 | 456 | 92 | 1 | — | — | |
| PL-CAP-END-250 Beam end cap 250UB | Ultra G4 mast weldment | 2 | 104 | 80 | 24 | 0 | — | — | |
| PL-INSERT-ADJ-25 Adjustable insert 25mm, threaded | UltraGlide RS base weldment | 8 | 464 | 376 | 88 | 0 | — | — | |
| PL-INSERT-ADJ-32 Adjustable insert 32mm, threaded | Ultra G4 mast weldment | 8 | 232 | 320 | 0 | 116 | — | — | |
| PL-SLIDE-UGRS UltraGlide rail slide pad | UltraGlide RS base weldment | 6 | 60 | 42 | 18 | 0 | — | — | |
| PL-SLIDE-UHMW-L UHMW mast slide, large, adjustable | Ultra G4 mast weldment | 4 | 88 | 160 | 0 | 82 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Ultra G4 mast weldment | 2 | 220 | 176 | 44 | 1 | — | — | |
| PT-2K-FPRED Two pack enamel, FencePro red | Machine, at blast and paint | 3.2 | 96.1 | 163.2 | 0 | 79.1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Ultra G4 mast weldment | 21 | 2755 | 2165 | 590 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Ultra G4 mast weldment | 3.5 | 498.2 | 391.3 | 106.9 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 123.1 | 37 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, large mast | 6 | 598 | 486 | 112 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | UltraGlide RS base weldment | 0.8 | 87.2 | 69.6 | 17.6 | 1 | — | — | |
| ST-IB350-250UB Infrabuild 350 I-beam 250UB31, mill run | Ultra G4 mast weldment | 6.2 | 138.6 | 205 | 0 | 840 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | UltraGlide RS base weldment | 0.35 | 46 | 36.05 | 9.95 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | UltraGlide RS base weldment | 0.25 | 30 | 24.15 | 5.85 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | UltraGlide RS base weldment | 2.4 | 327.8 | 262.6 | 65.2 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 102 | 30 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 178 | 52 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 4.05 | 1.95 | 0 | — | — | |
| WR-UGRS-HPIN UltraGlide hitch pin set | UltraGlide RS base weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| WR-UGRS-TLPIN UltraGlide top link pin and clip | UltraGlide RS base weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| WR-ULTRAG4-PLATE Ultra G4 hammer wear plate set | Ultra G4 mast weldment | 1 | 22 | 14 | 8 | 0 | — | — | |
| WR-ULTRAG4-ROPE Ultra G4 hoist rope, cut and swaged | Ultra G4 mast weldment | 1 | 22 | 14 | 8 | 0 | — | — |