Original / SM900 On track CustomerNC Equipment Ltd
Serialassigned at QC sign-off
MastKHORIG
BaseSidemount SM900
AttachmentsNone
Released14 Oct 2026
Final assembly5 Nov 2026
Promised to dealer23 Sep 2026
Convergence date
4 Nov 2026
Every sub-assembly is ready on or before 5 Nov 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Kinghitter Original mast weldment
Not started, ready 4 Nov, needed 4 Nov
Onto the assembly bench 6 Nov 2026
Calculated completion 16 Nov 2026
Promised to dealer 23 Sep 2026
Production stages
Currently at stage 1 of 10 since 14 Oct 2026
- Released to production14 Oct
- Steel cut and prep15 Oct
- Fabrication and weld16 Oct
- Machining27 Oct
- Blast and paint28 Oct
- Hydraulic assembly30 Oct
- Final assembly5 Nov
- Test rig10 Nov
- QC sign-off11 Nov
- Ready for despatch12 Nov
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Kinghitter Original mast weldment Mast weldment · 5 day build · SA-MW-KHORIG | Not started | — | 0 / 13.5 | 4 Nov | 4 Nov | Fits, with 0 days to spare |
| Sidemount SM900 base weldment Base weldment · 4 day build · SA-BW-SM900 | Not started | — | 0 / 11.5 | 4 Nov | 4 Nov | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 4 Nov | 4 Nov | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 4-bank Valve bank · 1 day build · SA-VB-SD5-4 | Not started | — | 0 / 1.2 | 4 Nov | 4 Nov | Fits, with 0 days to spare |
| Ram set, small mast Ram set · 1 day build · SA-RS-S | Not started | — | 0 / 1 | 4 Nov | 4 Nov | Fits, with 0 days to spare |
| Hose kit, small mast Hose kit · 1 day build · SA-HK-S | Not started | — | 0 / 1.2 | 4 Nov | 4 Nov | Fits, with 0 days to spare |
| Decal and document set, KH Decal set · 1 day build · SA-DS-KH | Not started | — | 0 / 0.5 | 4 Nov | 4 Nov | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $10,014
- Labour at standard, complete
- $2,456
- Hours booked
- 0 / 53.4
- Sold for
- $15,549
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Released to production on 14 Oct 2026 against SO-26-1189. No correspondence is threaded to this machine.
Component requirements
StockNetting
93 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Kinghitter Original mast weldment | 2 | 116 | 86 | 30 | 0 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 38 | 20 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 146 | 60 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 282 | 142 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Kinghitter Original mast weldment | 0.5 | 65 | 45.2 | 19.8 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 92 | 46 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Kinghitter Original mast weldment | 7 | 983 | 683.5 | 299.5 | 1.1 | — | — | |
| DC-KH-S3 Kinghitter Series 3 decal set | Decal and document set, KH | 1 | 47 | 33 | 14 | 1 | — | — | |
| DC-MANUAL-KH Kinghitter operator manual and parts book | Decal and document set, KH | 1 | 47 | 33 | 14 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, KH | 1 | 150 | 107 | 43 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, KH | 1 | 150 | 107 | 43 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 10.95 | 5.05 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 89 | 43 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 16 | 8 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 86 | 40 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 73 | 30 | 0 | — | — | |
| FB-FARMTEK-CARR Farmtek hammer carriage weldment | Kinghitter Original mast weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| FB-FARMTEK-FOOT Farmtek mast foot plate 20mm | Kinghitter Original mast weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| FB-FARMTEK-GUIDE Farmtek slide guide channel pair | Kinghitter Original mast weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| FB-FARMTEK-HEAD Farmtek mast head weld assembly | Kinghitter Original mast weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| FB-FARMTEK-LUG Farmtek lift lug set | Kinghitter Original mast weldment | 2 | 20 | 14 | 6 | 0 | — | — | |
| FB-FARMTEK-ROPEG Farmtek rope guide bracket | Kinghitter Original mast weldment | 2 | 20 | 14 | 6 | 0 | — | — | |
| FB-FARMTEK-STOP Farmtek carriage stop and buffer | Kinghitter Original mast weldment | 2 | 20 | 14 | 6 | 0 | — | — | |
| FB-FARMTEK-TOP Farmtek mast top plate, laser cut 16mm | Kinghitter Original mast weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| FB-SM900-CARRIAGE SM900 shift carriage | Sidemount SM900 base weldment | 1 | 19 | 14 | 5 | 1 | — | — | |
| FB-SM900-FRAME SM900 base frame weldment | Sidemount SM900 base weldment | 1 | 19 | 14 | 5 | 1 | — | — | |
| FB-SM900-LINK SM900 linkage arm pair | Sidemount SM900 base weldment | 1 | 19 | 14 | 5 | 0 | — | — | |
| FB-SM900-MOUNT SM900 mast mount bracket | Sidemount SM900 base weldment | 1 | 19 | 14 | 5 | 0 | — | — | |
| FB-SM900-PINPL SM900 pin plate set 20mm | Sidemount SM900 base weldment | 1 | 19 | 14 | 5 | 0 | — | — | |
| FB-SM900-STAB SM900 stabiliser foot | Sidemount SM900 base weldment | 1 | 19 | 14 | 5 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 356 | 120 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 584 | 240 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Kinghitter Original mast weldment | 12 | 1554 | 1086 | 468 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | Sidemount SM900 base weldment | 8 | 920 | 664 | 256 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | Sidemount SM900 base weldment | 1 | 109 | 79 | 30 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Kinghitter Original mast weldment | 1 | 110 | 80 | 30 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 356 | 120 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 1128 | 568 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Kinghitter Original mast weldment | 12 | 1964 | 1324 | 640 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | Sidemount SM900 base weldment | 8 | 920 | 664 | 256 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 1168 | 480 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Kinghitter Original mast weldment | 24 | 2640 | 1920 | 720 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | Sidemount SM900 base weldment | 16 | 1744 | 1264 | 480 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, small mast | 3 | 472.6 | 332.2 | 140.4 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 95 | 34 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, small mast | 1 | 119 | 89 | 30 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 284 | 92 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 459 | 176 | 0 | — | — | |
| HY-CTRL-CABLE-3 Cable control assembly, 3 lever | Valve bank assembly, Walvoil SD5 4-bank | 1 | 50 | 37 | 13 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 101 | 40 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 4-bank | 14 | 1872 | 1406 | 466 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 428 | 158 | 2 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, small mast | 4 | 352 | 268 | 84 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 2 | 651 | 480 | 171 | 1 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, small mast | 2 | 124 | 94 | 30 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 4-bank | 1 | 131 | 95 | 36 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 4-bank | 1 | 84 | 65 | 19 | 0 | — | — | |
| HY-HOSE-08-1600 Hose 2SN 08 dash, 1600mm, crimped both ends | Hose kit, small mast | 4 | 74 | 58 | 16 | 0 | — | — | |
| HY-HOSE-08-800 Hose 2SN 08 dash, 800mm, crimped both ends | Hose kit, small mast | 2 | 38 | 20 | 18 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 3376 | 1462 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 101 | 40 | 1 | — | — | |
| HY-RAM-ANGLE-50 Mast angle ram 50 x 250 | Ram set, small mast | 1 | 10 | 7 | 3 | 0 | — | — | |
| HY-RAM-SIDE-75 Side shift ram 75 x 900 | Sidemount SM900 base weldment | 1 | 25 | 41 | 0 | 20 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, small mast | 1 | 111 | 82 | 29 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 101 | 40 | 0 | — | — | |
| HY-VB-WV-SD5-4 Walvoil SD5 4-bank valve, cable control | Valve bank assembly, Walvoil SD5 4-bank | 1 | 45 | 37 | 8 | 24 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 79 | 36 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 190 | 96 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | Sidemount SM900 base weldment | 2 | 282 | 194 | 88 | 2 | — | — | |
| MC-BUSH-40 Bush 40 ID, bronze | Kinghitter Original mast weldment | 4 | 164 | 112 | 52 | 0 | — | — | |
| MC-PIN-40x220 Pin 40 x 220, hardened | Kinghitter Original mast weldment | 6 | 318 | 200 | 118 | 0 | — | — | |
| PL-BUSH-NYL-40 Nylon bush 40 x 50 | Sidemount SM900 base weldment | 4 | 128 | 96 | 32 | 0 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Kinghitter Original mast weldment | 2 | 116 | 86 | 30 | 0 | — | — | |
| PL-INSERT-ADJ-20 Adjustable insert 20mm, threaded | Kinghitter Original mast weldment | 8 | 80 | 56 | 24 | 0 | — | — | |
| PL-SLIDE-UHMW-S UHMW mast slide, small, adjustable | Kinghitter Original mast weldment | 4 | 40 | 28 | 12 | 0 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Kinghitter Original mast weldment | 2 | 220 | 160 | 60 | 1 | — | — | |
| PT-2K-KHRED Two pack enamel, Kinghitter red | Machine, at blast and paint | 3.2 | 131.3 | 86.4 | 44.9 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Kinghitter Original mast weldment | 21 | 2755 | 1919 | 836 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Kinghitter Original mast weldment | 3.5 | 498.2 | 345.5 | 152.7 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 106.1 | 54 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, small mast | 4 | 598 | 448 | 150 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | Sidemount SM900 base weldment | 0.8 | 87.2 | 63.2 | 24 | 1 | — | — | |
| ST-IB350-150UB Infrabuild 350 I-beam 150UB14, mill run | Kinghitter Original mast weldment | 4.4 | 42.9 | 29.8 | 13.1 | 180 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | Sidemount SM900 base weldment | 0.35 | 46 | 31.85 | 14.15 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | Sidemount SM900 base weldment | 0.25 | 30 | 21.35 | 8.65 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | Sidemount SM900 base weldment | 2.4 | 327.8 | 231 | 96.8 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 89 | 43 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 158 | 72 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 3.65 | 2.35 | 0 | — | — | |
| WR-FARMTEK-PLATE Farmtek hammer wear plate set | Kinghitter Original mast weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| WR-FARMTEK-ROPE Farmtek hoist rope, cut and swaged | Kinghitter Original mast weldment | 1 | 10 | 7 | 3 | 0 | — | — | |
| WR-SM900-HPIN SM900 hitch pin set | Sidemount SM900 base weldment | 1 | 19 | 14 | 5 | 0 | — | — | |
| WR-SM900-TLPIN SM900 top link pin and clip | Sidemount SM900 base weldment | 1 | 19 | 14 | 5 | 0 | — | — |