Farmtek / Digger On track CustomerOtago Farm Machinery Ltd
Serialassigned at QC sign-off
MastFarmtek
BaseDigger Hitch
AttachmentsNone
Released14 Sep 2026
Final assembly30 Sep 2026
Promised to dealer7 Oct 2026
Convergence date
29 Sep 2026
Every sub-assembly is ready on or before 30 Sep 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Farmtek mast weldment
Not started, ready 29 Sep, needed 29 Sep
Onto the assembly bench 30 Sep 2026
Calculated completion 13 Oct 2026
Promised to dealer 7 Oct 2026
Production stages
Currently at stage 1 of 10 since 14 Sep 2026
- Released to production14 Sep
- Steel cut and prep15 Sep
- Fabrication and weld16 Sep
- Machining23 Sep
- Blast and paint24 Sep
- Hydraulic assembly28 Sep
- Final assembly30 Sep
- Test rig5 Oct
- QC sign-off7 Oct
- Ready for despatch8 Oct
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Farmtek mast weldment Mast weldment · 5 day build · SA-MW-FARMTEK | Not started | — | 0 / 13.5 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| Digger Hitch base weldment Base weldment · 3 day build · SA-BW-DIGGER | Not started | — | 0 / 10.2 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 4-bank Valve bank · 1 day build · SA-VB-SD5-4 | Not started | — | 0 / 1.2 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| Ram set, small mast Ram set · 1 day build · SA-RS-S | Not started | — | 0 / 1 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| Hose kit, small mast Hose kit · 1 day build · SA-HK-S | Not started | — | 0 / 1.2 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| Decal and document set, FP Decal set · 1 day build · SA-DS-FP | Not started | — | 0 / 0.5 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $11,681
- Labour at standard, complete
- $2,397
- Hours booked
- 0 / 52.1
- Sold for
- $13,394
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Released to production on 14 Sep 2026 against SO-26-1186. No correspondence is threaded to this machine.
Component requirements
StockNetting
93 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Farmtek mast weldment | 2 | 116 | 36 | 80 | 0 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 10.4 | 47.6 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 46 | 160 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 78 | 346 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Farmtek mast weldment | 0.5 | 65 | 15.4 | 49.6 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 26 | 112 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Farmtek mast weldment | 7 | 983 | 234 | 749 | 1.1 | — | — | |
| DC-FP-ULTRAG4 FencePro Ultra G4 decal set | Decal and document set, FP | 1 | 42 | 25 | 17 | 35 | — | — | |
| DC-MANUAL-FP FencePro operator manual and parts book | Decal and document set, FP | 1 | 72 | 25 | 47 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, FP | 1 | 150 | 44 | 106 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, FP | 1 | 150 | 44 | 106 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 3.45 | 12.55 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 26 | 106 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 5.2 | 18.8 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 26 | 100 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 23 | 80 | 0 | — | — | |
| FB-DIGGER-CARRIAGE Digger shift carriage | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| FB-DIGGER-FRAME Digger base frame weldment | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| FB-DIGGER-LINK Digger linkage arm pair | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| FB-DIGGER-MOUNT Digger mast mount bracket | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| FB-DIGGER-PINPL Digger pin plate set 20mm | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| FB-DIGGER-STAB Digger stabiliser foot | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| FB-FARMTEK-CARR Farmtek hammer carriage weldment | Farmtek mast weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| FB-FARMTEK-FOOT Farmtek mast foot plate 20mm | Farmtek mast weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| FB-FARMTEK-GUIDE Farmtek slide guide channel pair | Farmtek mast weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| FB-FARMTEK-HEAD Farmtek mast head weld assembly | Farmtek mast weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| FB-FARMTEK-LUG Farmtek lift lug set | Farmtek mast weldment | 2 | 20 | 2 | 18 | 0 | — | — | |
| FB-FARMTEK-ROPEG Farmtek rope guide bracket | Farmtek mast weldment | 2 | 20 | 2 | 18 | 0 | — | — | |
| FB-FARMTEK-STOP Farmtek carriage stop and buffer | Farmtek mast weldment | 2 | 20 | 2 | 18 | 0 | — | — | |
| FB-FARMTEK-TOP Farmtek mast top plate, laser cut 16mm | Farmtek mast weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 156 | 320 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 184 | 640 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Farmtek mast weldment | 12 | 1554 | 414 | 1140 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | Digger Hitch base weldment | 8 | 920 | 232 | 688 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | Digger Hitch base weldment | 1 | 109 | 29 | 80 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Farmtek mast weldment | 1 | 110 | 30 | 80 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 156 | 320 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 304 | 1392 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Farmtek mast weldment | 12 | 1964 | 444 | 1520 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | Digger Hitch base weldment | 8 | 920 | 232 | 688 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 368 | 1280 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Farmtek mast weldment | 24 | 2640 | 720 | 1920 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | Digger Hitch base weldment | 16 | 1744 | 464 | 1280 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, small mast | 3 | 472.6 | 129 | 343.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 39 | 90 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, small mast | 1 | 119 | 39 | 80 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 124 | 252 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 179 | 456 | 0 | — | — | |
| HP-HITCH-QC Excavator quick coupler hitch | Digger Hitch base weldment | 1 | 18 | 3 | 15 | 0 | — | — | |
| HY-CTRL-CABLE-3 Cable control assembly, 3 lever | Valve bank assembly, Walvoil SD5 4-bank | 1 | 50 | 19 | 31 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 39 | 102 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 4-bank | 14 | 1872 | 610 | 1262 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 172 | 414 | 2 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, small mast | 4 | 352 | 130 | 222 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 2 | 651 | 194 | 457 | 1 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, small mast | 2 | 124 | 44 | 80 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 4-bank | 1 | 131 | 39 | 92 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 4-bank | 1 | 84 | 31 | 53 | 0 | — | — | |
| HY-HOSE-08-1600 Hose 2SN 08 dash, 1600mm, crimped both ends | Hose kit, small mast | 4 | 74 | 18 | 56 | 0 | — | — | |
| HY-HOSE-08-800 Hose 2SN 08 dash, 800mm, crimped both ends | Hose kit, small mast | 2 | 38 | 2 | 36 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 1184 | 3654 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 39 | 102 | 1 | — | — | |
| HY-RAM-ANGLE-50 Mast angle ram 50 x 250 | Ram set, small mast | 1 | 10 | 1 | 9 | 0 | — | — | |
| HY-RAM-SIDE-50 Side shift ram 50 x 300 | Digger Hitch base weldment | 1 | 15 | 4 | 11 | 0 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, small mast | 1 | 111 | 36 | 75 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 39 | 102 | 0 | — | — | |
| HY-VB-WV-SD5-4 Walvoil SD5 4-bank valve, cable control | Valve bank assembly, Walvoil SD5 4-bank | 1 | 45 | 19 | 26 | 24 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 23 | 92 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 52 | 234 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | Digger Hitch base weldment | 2 | 282 | 58 | 224 | 2 | — | — | |
| MC-BUSH-40 Bush 40 ID, bronze | Farmtek mast weldment | 4 | 164 | 48 | 116 | 0 | — | — | |
| MC-PIN-40x220 Pin 40 x 220, hardened | Farmtek mast weldment | 6 | 318 | 42 | 276 | 0 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Farmtek mast weldment | 2 | 116 | 36 | 80 | 0 | — | — | |
| PL-INSERT-ADJ-20 Adjustable insert 20mm, threaded | Farmtek mast weldment | 8 | 80 | 8 | 72 | 0 | — | — | |
| PL-SLIDE-UHMW-S UHMW mast slide, small, adjustable | Farmtek mast weldment | 4 | 40 | 4 | 36 | 0 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Farmtek mast weldment | 2 | 220 | 60 | 160 | 1 | — | — | |
| PT-2K-FPRED Two pack enamel, FencePro red | Machine, at blast and paint | 3.2 | 96.1 | 48 | 48.1 | 79.1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Farmtek mast weldment | 21 | 2755 | 651 | 2104 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Farmtek mast weldment | 3.5 | 498.2 | 115.5 | 382.7 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 28.9 | 131.2 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, small mast | 4 | 598 | 194 | 404 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | Digger Hitch base weldment | 0.8 | 87.2 | 23.2 | 64 | 1 | — | — | |
| ST-IB350-150UB Infrabuild 350 I-beam 150UB14, mill run | Farmtek mast weldment | 4.2 | 42.9 | 4.2 | 38.7 | 180 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | Digger Hitch base weldment | 0.35 | 46 | 10.15 | 35.85 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | Digger Hitch base weldment | 0.25 | 30 | 7.25 | 22.75 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | Digger Hitch base weldment | 2.4 | 327.8 | 72.4 | 255.4 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 26 | 106 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 46 | 184 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 1.15 | 4.85 | 0 | — | — | |
| WR-DIGGER-HPIN Digger hitch pin set | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| WR-DIGGER-TLPIN Digger top link pin and clip | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| WR-FARMTEK-PLATE Farmtek hammer wear plate set | Farmtek mast weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| WR-FARMTEK-ROPE Farmtek hoist rope, cut and swaged | Farmtek mast weldment | 1 | 10 | 1 | 9 | 0 | — | — |