Series 2 / SM600 / Leg Ram On track CustomerHawke's Bay Tractors Ltd
Serialassigned at QC sign-off
MastKHS2
BaseSidemount SM600
AttachmentsHydraulic Leg Ram
Released7 Sep 2026
Final assembly28 Sep 2026
Promised to dealer7 Sep 2026
Convergence date
25 Sep 2026
Every sub-assembly is ready on or before 28 Sep 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Kinghitter Series 2 mast weldment
Not started, ready 25 Sep, needed 25 Sep
Onto the assembly bench 28 Sep 2026
Calculated completion 9 Oct 2026
Promised to dealer 7 Sep 2026
Production stages
Currently at stage 2 of 10 since 8 Sep 2026
- Released to production7 Sep
- Steel cut and prep8 Sep
- Fabrication and weld9 Sep
- Machining17 Sep
- Blast and paint22 Sep
- Hydraulic assembly24 Sep
- Final assembly28 Sep
- Test rig2 Oct
- QC sign-off5 Oct
- Ready for despatch7 Oct
Sub-assemblies
Platform
0 of 8 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Kinghitter Series 2 mast weldment Mast weldment · 6 day build · SA-MW-KHS2 | Not started | — | 0 / 17.7 | 25 Sep | 25 Sep | Fits, with 0 days to spare |
| Sidemount SM600 base weldment Base weldment · 3 day build · SA-BW-SM600 | Not started | — | 0 / 10.4 | 25 Sep | 25 Sep | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 25 Sep | 25 Sep | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 4-bank Valve bank · 1 day build · SA-VB-SD5-4 | Not started | — | 0 / 1.2 | 25 Sep | 25 Sep | Fits, with 0 days to spare |
| Ram set, medium mast Ram set · 1 day build · SA-RS-M | Not started | — | 0 / 1.2 | 25 Sep | 25 Sep | Fits, with 0 days to spare |
| Hose kit, medium mast Hose kit · 1 day build · SA-HK-M | Not started | — | 0 / 1.5 | 25 Sep | 25 Sep | Fits, with 0 days to spare |
| Decal and document set, KH Decal set · 1 day build · SA-DS-KH | Not started | — | 0 / 0.5 | 25 Sep | 25 Sep | Fits, with 0 days to spare |
| Hydraulic Leg Ram Attachment kit · 2 day build · SA-AK-LEGRAM | Not started | — | 0 / 3.4 | 25 Sep | 25 Sep | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $11,126
- Labour at standard, complete
- $2,778
- Hours booked
- 0 / 60.4
- Sold for
- $19,200
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
103 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Kinghitter Series 2 mast weldment | 2 | 116 | 28 | 88 | 0 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 7.2 | 50.8 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 30 | 176 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 54 | 370 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Kinghitter Series 2 mast weldment | 0.5 | 65 | 11.4 | 53.6 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 18 | 120 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Kinghitter Series 2 mast weldment | 8.5 | 983 | 176.5 | 806.5 | 1.1 | — | — | |
| DC-KH-S3 Kinghitter Series 3 decal set | Decal and document set, KH | 1 | 47 | 10 | 37 | 1 | — | — | |
| DC-MANUAL-KH Kinghitter operator manual and parts book | Decal and document set, KH | 1 | 47 | 10 | 37 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, KH | 1 | 150 | 36 | 114 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, KH | 1 | 150 | 36 | 114 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 2.25 | 13.75 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 18 | 114 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 3.6 | 20.4 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 18 | 108 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 15 | 88 | 0 | — | — | |
| FB-LEGRAM-ARM Leg Ram arm weldment | Hydraulic Leg Ram | 1 | 6 | 2 | 4 | 0 | — | — | |
| FB-LEGRAM-BRKT Leg Ram mounting bracket | Hydraulic Leg Ram | 1 | 6 | 2 | 4 | 0 | — | — | |
| FB-LEGRAM-CLAMP Leg Ram clamp assembly | Hydraulic Leg Ram | 1 | 6 | 2 | 4 | 0 | — | — | |
| FB-LEGRAM-GUARD Leg Ram guard and shroud | Hydraulic Leg Ram | 1 | 6 | 2 | 4 | 0 | — | — | |
| FB-LEGRAM-PLATE Leg Ram backing plate | Hydraulic Leg Ram | 1 | 6 | 2 | 4 | 0 | — | — | |
| FB-MULE-CARR Mule hammer carriage weldment | Kinghitter Series 2 mast weldment | 1 | 37 | 11 | 26 | 0 | — | — | |
| FB-MULE-FOOT Mule mast foot plate 20mm | Kinghitter Series 2 mast weldment | 1 | 37 | 11 | 26 | 0 | — | — | |
| FB-MULE-GUIDE Mule slide guide channel pair | Kinghitter Series 2 mast weldment | 1 | 37 | 11 | 26 | 0 | — | — | |
| FB-MULE-HEAD Mule mast head weld assembly | Kinghitter Series 2 mast weldment | 1 | 37 | 11 | 26 | 0 | — | — | |
| FB-MULE-LUG Mule lift lug set | Kinghitter Series 2 mast weldment | 2 | 74 | 22 | 52 | 0 | — | — | |
| FB-MULE-ROPEG Mule rope guide bracket | Kinghitter Series 2 mast weldment | 2 | 74 | 22 | 52 | 0 | — | — | |
| FB-MULE-STOP Mule carriage stop and buffer | Kinghitter Series 2 mast weldment | 2 | 74 | 22 | 52 | 0 | — | — | |
| FB-MULE-TOP Mule mast top plate, laser cut 16mm | Kinghitter Series 2 mast weldment | 1 | 37 | 11 | 26 | 0 | — | — | |
| FB-SM600-CARRIAGE SM600 shift carriage | Sidemount SM600 base weldment | 1 | 15 | 3 | 12 | 0 | — | — | |
| FB-SM600-FRAME SM600 base frame weldment | Sidemount SM600 base weldment | 1 | 15 | 3 | 12 | 0 | — | — | |
| FB-SM600-LINK SM600 linkage arm pair | Sidemount SM600 base weldment | 1 | 15 | 3 | 12 | 0 | — | — | |
| FB-SM600-MOUNT SM600 mast mount bracket | Sidemount SM600 base weldment | 1 | 15 | 3 | 12 | 0 | — | — | |
| FB-SM600-PINPL SM600 pin plate set 20mm | Sidemount SM600 base weldment | 1 | 15 | 3 | 12 | 0 | — | — | |
| FB-SM600-STAB SM600 stabiliser foot | Sidemount SM600 base weldment | 1 | 15 | 3 | 12 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 124 | 352 | 0 | — | — | |
| FS-BOLT-M12-60 Bolt M12 x 60 grade 8.8, zinc | Hydraulic Leg Ram | 8 | 752 | 112 | 640 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 120 | 704 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Kinghitter Series 2 mast weldment | 12 | 1554 | 318 | 1236 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | Sidemount SM600 base weldment | 8 | 920 | 168 | 752 | 0 | — | — | |
| FS-KIT-ATT Attachment fastener kit, bagged | Hydraulic Leg Ram | 1 | 46 | 11 | 35 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | Sidemount SM600 base weldment | 1 | 109 | 21 | 88 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Kinghitter Series 2 mast weldment | 1 | 110 | 22 | 88 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 124 | 352 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Hydraulic Leg Ram | 8 | 1696 | 232 | 1464 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Kinghitter Series 2 mast weldment | 12 | 1964 | 348 | 1616 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | Sidemount SM600 base weldment | 8 | 920 | 168 | 752 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 240 | 1408 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Kinghitter Series 2 mast weldment | 24 | 2640 | 528 | 2112 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | Sidemount SM600 base weldment | 16 | 1744 | 336 | 1408 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, medium mast | 3 | 472.6 | 105 | 367.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 31 | 98 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, medium mast | 1 | 119 | 31 | 88 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 104 | 272 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 139 | 496 | 0 | — | — | |
| HY-CTRL-CABLE-3 Cable control assembly, 3 lever | Valve bank assembly, Walvoil SD5 4-bank | 1 | 50 | 15 | 35 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 31 | 110 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 4-bank | 14 | 1872 | 488 | 1384 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 134 | 452 | 2 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, medium mast | 6 | 352 | 106 | 246 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 2 | 651 | 151 | 500 | 1 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, medium mast | 2 | 124 | 36 | 88 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 4-bank | 1 | 131 | 31 | 100 | 0 | — | — | |
| HY-FIT-TEE-08 Tee 1/2 | Hose kit, medium mast | 2 | 104 | 34 | 70 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 4-bank | 1 | 84 | 26 | 58 | 0 | — | — | |
| HY-HOSE-08-1600 Hose 2SN 08 dash, 1600mm, crimped both ends | Hydraulic Leg Ram | 2 | 74 | 16 | 58 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, medium mast | 4 | 436 | 120 | 316 | 0 | — | — | |
| HY-HOSE-10-2000 Hose 2SN 10 dash, 2000mm, crimped both ends | Hose kit, medium mast | 2 | 104 | 34 | 70 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 916 | 3922 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 31 | 110 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, medium mast | 1 | 166 | 43 | 123 | 1 | — | — | |
| HY-RAM-LEG-75 Leg ram 75 x 600 | Hydraulic Leg Ram | 1 | 5 | 2 | 3 | 1 | — | — | |
| HY-RAM-SIDE-63 Side shift ram 63 x 450 | Sidemount SM600 base weldment | 1 | 38 | 9 | 29 | 0 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, medium mast | 1 | 111 | 28 | 83 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 31 | 110 | 0 | — | — | |
| HY-VB-WV-SD5-4 Walvoil SD5 4-bank valve, cable control | Valve bank assembly, Walvoil SD5 4-bank | 1 | 45 | 15 | 30 | 24 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 15 | 100 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 36 | 250 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | Sidemount SM600 base weldment | 2 | 282 | 42 | 240 | 2 | — | — | |
| MC-BUSH-40 Bush 40 ID, bronze | Kinghitter Series 2 mast weldment | 4 | 164 | 44 | 120 | 0 | — | — | |
| MC-PIN-40x220 Pin 40 x 220, hardened | Kinghitter Series 2 mast weldment | 2 | 318 | 40 | 278 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Ram set, medium mast | 6 | 548 | 144 | 404 | 1 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Kinghitter Series 2 mast weldment | 2 | 116 | 28 | 88 | 0 | — | — | |
| PL-INSERT-ADJ-25 Adjustable insert 25mm, threaded | Kinghitter Series 2 mast weldment | 8 | 464 | 128 | 336 | 0 | — | — | |
| PL-SLIDE-UHMW-M UHMW mast slide, medium, adjustable | Kinghitter Series 2 mast weldment | 4 | 192 | 52 | 140 | 1 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Kinghitter Series 2 mast weldment | 2 | 220 | 44 | 176 | 1 | — | — | |
| PT-2K-KHRED Two pack enamel, Kinghitter red | Machine, at blast and paint | 3.2 | 131.3 | 12.8 | 118.5 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Kinghitter Series 2 mast weldment | 21 | 2755 | 483 | 2272 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Kinghitter Series 2 mast weldment | 4.1 | 498.2 | 86.9 | 411.3 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 20.1 | 140 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, medium mast | 4 | 598 | 154 | 444 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | Sidemount SM600 base weldment | 0.8 | 87.2 | 16.8 | 70.4 | 1 | — | — | |
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | Kinghitter Series 2 mast weldment | 5 | 0 | 65.4 | 0 | 720 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | Sidemount SM600 base weldment | 0.35 | 46 | 7.35 | 38.65 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | Sidemount SM600 base weldment | 0.25 | 30 | 5.25 | 24.75 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | Sidemount SM600 base weldment | 2.4 | 327.8 | 53.2 | 274.6 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 18 | 114 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 30 | 200 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 0.75 | 5.25 | 0 | — | — | |
| WR-MULE-PLATE Mule hammer wear plate set | Kinghitter Series 2 mast weldment | 1 | 37 | 11 | 26 | 0 | — | — | |
| WR-MULE-ROPE Mule hoist rope, cut and swaged | Kinghitter Series 2 mast weldment | 1 | 37 | 11 | 26 | 0 | — | — | |
| WR-SM600-HPIN SM600 hitch pin set | Sidemount SM600 base weldment | 1 | 15 | 3 | 12 | 0 | — | — | |
| WR-SM600-TLPIN SM600 top link pin and clip | Sidemount SM600 base weldment | 1 | 15 | 3 | 12 | 0 | — | — |