Series 2 / RB800 On track CustomerCochranes of Canterbury Ltd
Serialassigned at QC sign-off
MastKHS2
BaseRB800
AttachmentsNone
Released8 Sep 2026
Final assembly2 Oct 2026
Promised to dealer2 Sep 2026
Convergence date
1 Oct 2026
Every sub-assembly is ready on or before 2 Oct 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Kinghitter Series 2 mast weldment
Not started, ready 1 Oct, needed 1 Oct
Onto the assembly bench 2 Oct 2026
Calculated completion 8 Oct 2026
Promised to dealer 2 Sep 2026
Production stages
Currently at stage 1 of 10 since 8 Sep 2026
- Released to production8 Sep
- Steel cut and prep9 Sep
- Fabrication and weld10 Sep
- Machining18 Sep
- Blast and paint21 Sep
- Hydraulic assembly25 Sep
- Final assembly2 Oct
- Test rig6 Oct
- QC sign-off7 Oct
- Ready for despatch8 Oct
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Kinghitter Series 2 mast weldment Mast weldment · 6 day build · SA-MW-KHS2 | Not started | — | 0 / 17.7 | 1 Oct | 1 Oct | Fits, with 0 days to spare |
| RB800 base weldment Base weldment · 6 day build · SA-BW-RB800 | Not started | — | 0 / 19.2 | 1 Oct | 1 Oct | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 1 Oct | 1 Oct | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 6-bank Valve bank · 1 day build · SA-VB-SD5-6 | Not started | — | 0 / 1.5 | 1 Oct | 1 Oct | Fits, with 0 days to spare |
| Ram set, medium mast Ram set · 1 day build · SA-RS-M | Not started | — | 0 / 1.2 | 1 Oct | 1 Oct | Fits, with 0 days to spare |
| Hose kit, medium mast Hose kit · 1 day build · SA-HK-M | Not started | — | 0 / 1.5 | 1 Oct | 1 Oct | Fits, with 0 days to spare |
| Decal and document set, KH Decal set · 1 day build · SA-DS-KH | Not started | — | 0 / 0.5 | 1 Oct | 1 Oct | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $13,148
- Labour at standard, complete
- $3,041
- Hours booked
- 0 / 66.1
- Sold for
- $23,832
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
96 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Kinghitter Series 2 mast weldment | 2 | 116 | 44 | 72 | 0 | — | — | |
| BR-SLEW-800 Slew ring 800mm, internal gear | RB800 base weldment | 1 | 5 | 4 | 1 | 8 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 14.2 | 43.8 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 58 | 148 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 106 | 318 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Kinghitter Series 2 mast weldment | 0.5 | 65 | 19.3 | 45.7 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 35 | 103 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Kinghitter Series 2 mast weldment | 7 | 983 | 293.5 | 689.5 | 1.1 | — | — | |
| DC-KH-S3 Kinghitter Series 3 decal set | Decal and document set, KH | 1 | 47 | 15 | 32 | 1 | — | — | |
| DC-MANUAL-KH Kinghitter operator manual and parts book | Decal and document set, KH | 1 | 47 | 15 | 32 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, KH | 1 | 150 | 52 | 98 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, KH | 1 | 150 | 52 | 98 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 4.35 | 11.65 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 34 | 98 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 6.4 | 17.6 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 33 | 93 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 29 | 74 | 0 | — | — | |
| FB-MULE-CARR Mule hammer carriage weldment | Kinghitter Series 2 mast weldment | 1 | 37 | 14 | 23 | 0 | — | — | |
| FB-MULE-FOOT Mule mast foot plate 20mm | Kinghitter Series 2 mast weldment | 1 | 37 | 14 | 23 | 0 | — | — | |
| FB-MULE-GUIDE Mule slide guide channel pair | Kinghitter Series 2 mast weldment | 1 | 37 | 14 | 23 | 0 | — | — | |
| FB-MULE-HEAD Mule mast head weld assembly | Kinghitter Series 2 mast weldment | 1 | 37 | 14 | 23 | 0 | — | — | |
| FB-MULE-LUG Mule lift lug set | Kinghitter Series 2 mast weldment | 2 | 74 | 28 | 46 | 0 | — | — | |
| FB-MULE-ROPEG Mule rope guide bracket | Kinghitter Series 2 mast weldment | 2 | 74 | 28 | 46 | 0 | — | — | |
| FB-MULE-STOP Mule carriage stop and buffer | Kinghitter Series 2 mast weldment | 2 | 74 | 28 | 46 | 0 | — | — | |
| FB-MULE-TOP Mule mast top plate, laser cut 16mm | Kinghitter Series 2 mast weldment | 1 | 37 | 14 | 23 | 0 | — | — | |
| FB-RB800-CARRIAGE RB800 shift carriage | RB800 base weldment | 1 | 14 | 4 | 10 | 0 | — | — | |
| FB-RB800-FRAME RB800 base frame weldment | RB800 base weldment | 1 | 14 | 4 | 10 | 0 | — | — | |
| FB-RB800-LINK RB800 linkage arm pair | RB800 base weldment | 1 | 14 | 4 | 10 | 0 | — | — | |
| FB-RB800-MOUNT RB800 mast mount bracket | RB800 base weldment | 1 | 14 | 4 | 10 | 0 | — | — | |
| FB-RB800-PINPL RB800 pin plate set 20mm | RB800 base weldment | 1 | 14 | 4 | 10 | 0 | — | — | |
| FB-RB800-STAB RB800 stabiliser foot | RB800 base weldment | 1 | 14 | 4 | 10 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 6-bank | 4 | 476 | 180 | 296 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 232 | 592 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Kinghitter Series 2 mast weldment | 12 | 1554 | 486 | 1068 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | RB800 base weldment | 8 | 920 | 296 | 624 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | RB800 base weldment | 1 | 109 | 35 | 74 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Kinghitter Series 2 mast weldment | 1 | 110 | 36 | 74 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 6-bank | 4 | 476 | 180 | 296 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 416 | 1280 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Kinghitter Series 2 mast weldment | 12 | 1964 | 544 | 1420 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | RB800 base weldment | 8 | 920 | 296 | 624 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 464 | 1184 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Kinghitter Series 2 mast weldment | 24 | 2640 | 864 | 1776 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | RB800 base weldment | 16 | 1744 | 560 | 1184 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, medium mast | 3 | 472.6 | 153 | 319.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 46 | 83 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, medium mast | 1 | 119 | 45 | 74 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 140 | 236 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 217 | 418 | 0 | — | — | |
| HY-CTRL-CABLE-4 Cable control assembly, 4 lever | Valve bank assembly, Walvoil SD5 6-bank | 1 | 28 | 13 | 15 | 20 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 48 | 93 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 6-bank | 18 | 1872 | 704 | 1168 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 206 | 380 | 2 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, medium mast | 6 | 352 | 152 | 200 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 2 | 651 | 223 | 428 | 1 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, medium mast | 2 | 124 | 52 | 72 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 6-bank | 1 | 131 | 47 | 84 | 0 | — | — | |
| HY-FIT-TEE-08 Tee 1/2 | Hose kit, medium mast | 2 | 104 | 48 | 56 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 6-bank | 1 | 84 | 34 | 50 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, medium mast | 4 | 436 | 172 | 264 | 0 | — | — | |
| HY-HOSE-10-2000 Hose 2SN 10 dash, 2000mm, crimped both ends | Hose kit, medium mast | 2 | 104 | 48 | 56 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 1529 | 3309 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 48 | 93 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, medium mast | 1 | 166 | 62 | 104 | 1 | — | — | |
| HY-RAM-ROT-63 Rotate ram 63 x 500, twin | RB800 base weldment | 1 | 16 | 9 | 7 | 14 | — | — | |
| HY-RAM-SIDE-75 Side shift ram 75 x 900 | RB800 base weldment | 1 | 25 | 15 | 10 | 20 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, medium mast | 1 | 111 | 42 | 69 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 48 | 93 | 0 | — | — | |
| HY-VB-WV-SD5-6 Walvoil SD5 6-bank valve, cable control | Valve bank assembly, Walvoil SD5 6-bank | 1 | 28 | 13 | 15 | 9 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 31 | 84 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 71 | 215 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | RB800 base weldment | 2 | 282 | 78 | 204 | 2 | — | — | |
| MC-BUSH-40 Bush 40 ID, bronze | Kinghitter Series 2 mast weldment | 4 | 164 | 56 | 108 | 0 | — | — | |
| MC-PIN-40x220 Pin 40 x 220, hardened | Kinghitter Series 2 mast weldment | 2 | 318 | 64 | 254 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Ram set, medium mast | 4 | 548 | 218 | 330 | 1 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Kinghitter Series 2 mast weldment | 2 | 116 | 44 | 72 | 0 | — | — | |
| PL-INSERT-ADJ-25 Adjustable insert 25mm, threaded | Kinghitter Series 2 mast weldment | 8 | 464 | 184 | 280 | 0 | — | — | |
| PL-SLIDE-UHMW-M UHMW mast slide, medium, adjustable | Kinghitter Series 2 mast weldment | 4 | 192 | 80 | 112 | 1 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Kinghitter Series 2 mast weldment | 2 | 220 | 72 | 148 | 1 | — | — | |
| PT-2K-KHRED Two pack enamel, Kinghitter red | Machine, at blast and paint | 3.2 | 131.3 | 28.8 | 102.5 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Kinghitter Series 2 mast weldment | 21 | 2755 | 817 | 1938 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Kinghitter Series 2 mast weldment | 3.5 | 498.2 | 146.1 | 352.1 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 39.5 | 120.6 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, medium mast | 4 | 598 | 222 | 376 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | RB800 base weldment | 0.8 | 87.2 | 28 | 59.2 | 1 | — | — | |
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | Kinghitter Series 2 mast weldment | 5 | 0 | 100.8 | 0 | 720 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | RB800 base weldment | 0.35 | 46 | 12.95 | 33.05 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | RB800 base weldment | 0.25 | 30 | 9.55 | 20.45 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | RB800 base weldment | 2.4 | 327.8 | 93 | 234.8 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 34 | 98 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 62 | 168 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 1.45 | 4.55 | 0 | — | — | |
| WR-MULE-PLATE Mule hammer wear plate set | Kinghitter Series 2 mast weldment | 1 | 37 | 14 | 23 | 0 | — | — | |
| WR-MULE-ROPE Mule hoist rope, cut and swaged | Kinghitter Series 2 mast weldment | 1 | 37 | 14 | 23 | 0 | — | — | |
| WR-RB800-HPIN RB800 hitch pin set | RB800 base weldment | 1 | 14 | 4 | 10 | 0 | — | — | |
| WR-RB800-TLPIN RB800 top link pin and clip | RB800 base weldment | 1 | 14 | 4 | 10 | 0 | — | — |