Rotary Mulcher 1800 / 14-20t Blocked CustomerFulton Hogan Ltd
Serialassigned at QC sign-off
AttachmentsNone
Released5 Nov 2026
Final assembly8 Dec 2026
Promised to dealer15 Dec 2026
Convergence date
17 Dec 2026
The last sub-assembly is not ready until 17 Dec 2026, which is 7 working days after final assembly is scheduled to start on 8 Dec 2026. This machine cannot be built on its date.
Critical path
Valve bank assembly, Walvoil SD11 8-bank
Not started, ready 17 Dec, needed 7 Dec
Onto the assembly bench 24 Dec 2026
Calculated completion 7 Jan 2027
Promised to dealer 15 Dec 2026
Production stages
Currently at stage 1 of 10 since 5 Nov 2026
- Released to production5 Nov
- Steel cut and prep6 Nov
- Fabrication and weld9 Nov
- Machining25 Nov
- Blast and paint27 Nov
- Hydraulic assembly3 Dec
- Final assembly8 Dec
- Test rig14 Dec
- QC sign-off15 Dec
- Ready for despatch17 Dec
Sub-assemblies
Platform
0 of 4 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Hooper pile driver frame weldment Frame weldment · 12 day build · SA-FW-HPPILE | Not started | — | 0 / 41 | 7 Dec | 7 Dec | Fits, with 0 days to spare |
| Hydraulic pack, high flow civil Hydraulic pack · 3 day build · SA-HP-HF | Not started | — | 0 / 5 | 7 Dec | 7 Dec | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD11 8-bank Valve bank · 2 day build · SA-VB-SD11 | Not started | — | 0 / 3 | 7 Dec | 17 Dec | 8 days late. Nothing on order to cover it. |
| Decal and document set, HP Decal set · 1 day build · SA-DS-HP | Not started | — | 0 / 0.5 | 7 Dec | 7 Dec | Fits, with 0 days to spare |
3 shortages against this machine
| Item | Short | Cover | |
|---|---|---|---|
| HY-JOY-PROP Proportional joystick, ActiveBlock | 2 | nothing | |
| EL-LOOM-PROP Wiring loom, proportional control | 1 | nothing | |
| HY-VB-WV-SD11 Walvoil SD11 8-bank valve, hydraulic pilot | 1 | 16 Dec |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $20,630
- Labour at standard, complete
- $3,979
- Hours booked
- 0 / 86.5
- Sold for
- $62,392
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
48 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| HY-JOY-PROP Proportional joystick, ActiveBlock | Valve bank assembly, Walvoil SD11 8-bank | 2 | 25 | 43 | 0 | 12 | — | 2 | |
| EL-LOOM-PROP Wiring loom, proportional control | Valve bank assembly, Walvoil SD11 8-bank | 1 | 19 | 43 | 0 | 19 | — | 1 | |
| HY-VB-WV-SD11 Walvoil SD11 8-bank valve, hydraulic pilot | Valve bank assembly, Walvoil SD11 8-bank | 1 | 3 | 5 | 0 | 5 | 16 Dec | 1 | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.8 | 58 | 53.6 | 4.4 | 0 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 6 | 424 | 397 | 27 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Hooper pile driver frame weldment | 0.6 | 65 | 60.9 | 4.1 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 2 | 138 | 129 | 9 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Hooper pile driver frame weldment | 9 | 983 | 923 | 60 | 1.1 | — | — | |
| DC-HP-PILE Hooper Pile Driver decal set | Decal and document set, HP | 1 | 6 | 5 | 1 | 0 | — | — | |
| DC-MANUAL-HP Hooper operator manual and parts book | Decal and document set, HP | 1 | 6 | 5 | 1 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, HP | 1 | 150 | 142 | 8 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, HP | 1 | 150 | 142 | 8 | 1 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 124 | 8 | 0 | — | — | |
| EL-BEACON-LED LED beacon, magnetic base | Machine, at blast and paint | 1 | 6 | 5 | 1 | 0 | — | — | |
| EL-SOL-12V Solenoid 12V, DIN plug | Valve bank assembly, Walvoil SD11 8-bank | 8 | 48 | 40 | 8 | 40 | — | — | |
| FS-BOLT-M24-140 Bolt M24 x 140 grade 8.8, zinc | Machine, at blast and paint | 12 | 84 | 72 | 12 | 0 | — | — | |
| FS-NUT-M24 Nyloc nut M24 grade 8 | Machine, at blast and paint | 12 | 84 | 72 | 12 | 0 | — | — | |
| GS-MOUNT-RUB-75 Rubber mount 75mm, M16 | Hydraulic pack, high flow civil | 6 | 176 | 162 | 14 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, high flow civil | 4 | 635 | 599 | 36 | 0 | — | — | |
| HP-FRAME-PILE Hooper pile driver frame weldment | Hooper pile driver frame weldment | 1 | 3 | 2 | 1 | 1 | — | — | |
| HP-HITCH-QC Excavator quick coupler hitch | Hooper pile driver frame weldment | 1 | 18 | 17 | 1 | 0 | — | — | |
| HY-ACC-05 Accumulator 0.5L | Hydraulic pack, high flow civil | 2 | 47 | 43 | 4 | 0 | — | — | |
| HY-COOL-12V Oil cooler 12V, 8 plate | Hydraulic pack, high flow civil | 1 | 41 | 38 | 3 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, high flow civil | 2 | 141 | 133 | 8 | 0 | — | — | |
| HY-FIT-BSP-16 BSP male 1 | Hydraulic pack, high flow civil | 18 | 108 | 90 | 18 | 0 | — | — | |
| HY-FIT-CBAL-08 Counterbalance valve 1/2 | Valve bank assembly, Walvoil SD11 8-bank | 4 | 34 | 53 | 0 | 25 | — | — | |
| HY-FIT-DIV-50 Flow divider 50/50 | Hydraulic pack, high flow civil | 1 | 6 | 5 | 1 | 0 | — | — | |
| HY-FIT-MANIF-4 Manifold block, 4 port | Hydraulic pack, high flow civil | 2 | 47 | 43 | 4 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD11 8-bank | 2 | 131 | 123 | 8 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, high flow civil | 92 | 4838 | 4532 | 306 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, high flow civil | 2 | 141 | 133 | 8 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, high flow civil | 2 | 141 | 133 | 8 | 0 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 2 | 115 | 107 | 8 | 0 | — | — | |
| LF-EYE-M20 Lifting eye M20, rated | Hooper pile driver frame weldment | 4 | 28 | 24 | 4 | 0 | — | — | |
| LF-SHACKLE-32 Bow shackle 3.2t | Machine, at blast and paint | 4 | 24 | 20 | 4 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 4 | 286 | 268 | 18 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | Hooper pile driver frame weldment | 4 | 282 | 266 | 16 | 2 | — | — | |
| MC-BUSH-60 Bush 60 ID, bronze | Hooper pile driver frame weldment | 8 | 115 | 103 | 12 | 1 | — | — | |
| MC-PIN-60x320 Pin 60 x 320, hardened | Hooper pile driver frame weldment | 4 | 62 | 86 | 0 | 35 | — | — | |
| PT-2K-BLACK Two pack enamel, chassis black | Machine, at blast and paint | 6.5 | 39 | 32.5 | 6.5 | 0 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Hooper pile driver frame weldment | 26 | 2755 | 2593 | 162 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Hooper pile driver frame weldment | 4 | 498.2 | 469.1 | 29.1 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 2.2 | 160.1 | 150.1 | 10 | 1 | — | — | |
| ST-PL-20-350 Plate 20mm grade 350, 2400 x 1200 | Hooper pile driver frame weldment | 0.9 | 5 | 3.9 | 1.1 | 1 | — | — | |
| ST-PL-25-350 Plate 25mm grade 350, 1800 x 900 | Hooper pile driver frame weldment | 0.6 | 1 | 1.44 | 0 | 2 | — | — | |
| ST-RHS-200x100 RHS 200 x 100 x 9 | Hooper pile driver frame weldment | 5.2 | 34.8 | 29.6 | 5.2 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 124 | 8 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 4 | 230 | 214 | 16 | 0 | — | — |