Contractor / PB650 Blocked CustomerMurray Valley Ag Pty Ltd
Serialassigned at QC sign-off
MastKHCONTR
BasePB650
AttachmentsNone
Released3 Nov 2026
Final assembly3 Dec 2026
Promised to dealer3 Dec 2026
Convergence date
16 Dec 2026
The last sub-assembly is not ready until 16 Dec 2026, which is 9 working days after final assembly is scheduled to start on 3 Dec 2026. This machine cannot be built on its date.
Critical path
Valve bank assembly, Walvoil ActiveBlock
Not started, ready 16 Dec, needed 2 Dec
Onto the assembly bench 21 Dec 2026
Calculated completion 29 Dec 2026
Promised to dealer 3 Dec 2026
Production stages
Currently at stage 1 of 10 since 3 Nov 2026
- Released to production3 Nov
- Steel cut and prep4 Nov
- Fabrication and weld5 Nov
- Machining19 Nov
- Blast and paint24 Nov
- Hydraulic assembly30 Nov
- Final assembly3 Dec
- Test rig7 Dec
- QC sign-off9 Dec
- Ready for despatch11 Dec
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Kinghitter Contractor mast weldment Mast weldment · 10 day build · SA-MW-KHCONTR | Not started | — | 0 / 26 | 2 Dec | 2 Dec | Fits, with 0 days to spare |
| PB650 base weldment Base weldment · 5 day build · SA-BW-PB650 | Not started | — | 0 / 16.1 | 2 Dec | 2 Dec | Fits, with 0 days to spare |
| Hydraulic pack, ActiveBlock Hydraulic pack · 2 day build · SA-HP-AB | Not started | — | 0 / 3 | 2 Dec | 2 Dec | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil ActiveBlock Valve bank · 1 day build · SA-VB-AB | Not started | — | 0 / 2 | 2 Dec | 16 Dec | 10 days late. Nothing on order to cover it. |
| Ram set, large mast Ram set · 1 day build · SA-RS-L | Not started | — | 0 / 1.5 | 2 Dec | 2 Dec | Fits, with 0 days to spare |
| Hose kit, large mast Hose kit · 1 day build · SA-HK-L | Not started | — | 0 / 2 | 2 Dec | 2 Dec | Fits, with 0 days to spare |
| Decal and document set, KH Decal set · 1 day build · SA-DS-KH | Not started | — | 0 / 0.5 | 2 Dec | 2 Dec | Fits, with 0 days to spare |
6 shortages against this machine
| Item | Short | Cover | |
|---|---|---|---|
| PL-INSERT-ADJ-32 Adjustable insert 32mm, threaded | 8 | nothing | |
| PL-SLIDE-UHMW-L UHMW mast slide, large, adjustable | 4 | nothing | |
| HY-HOSE-12-3600 Hose 2SN 12 dash, 3600mm, crimped both ends | 2 | nothing | |
| EL-LOOM-PROP Wiring loom, proportional control | 1 | nothing | |
| HY-JOY-PROP Proportional joystick, ActiveBlock | 1 | nothing | |
| HY-VB-WV-AB Walvoil ActiveBlock proportional module | 1 | 16 Dec |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $14,852
- Labour at standard, complete
- $3,363
- Hours booked
- 0 / 73.1
- Sold for
- A$33,975
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Released to production on 3 Nov 2026 against SO-26-1198. No correspondence is threaded to this machine.
Component requirements
StockNetting
100 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| PL-INSERT-ADJ-32 Adjustable insert 32mm, threaded | Kinghitter Contractor mast weldment | 8 | 232 | 376 | 0 | 116 | — | 8 | |
| PL-SLIDE-UHMW-L UHMW mast slide, large, adjustable | Kinghitter Contractor mast weldment | 4 | 88 | 188 | 0 | 82 | — | 4 | |
| HY-HOSE-12-3600 Hose 2SN 12 dash, 3600mm, crimped both ends | Hose kit, large mast | 2 | 100 | 120 | 0 | 0 | — | 2 | |
| EL-LOOM-PROP Wiring loom, proportional control | Valve bank assembly, Walvoil ActiveBlock | 1 | 19 | 41 | 0 | 19 | — | 1 | |
| HY-JOY-PROP Proportional joystick, ActiveBlock | Valve bank assembly, Walvoil ActiveBlock | 1 | 25 | 41 | 0 | 12 | — | 1 | |
| HY-VB-WV-AB Walvoil ActiveBlock proportional module | Valve bank assembly, Walvoil ActiveBlock | 1 | 15 | 31 | 0 | 21 | 16 Dec | 1 | |
| BR-SHEAVE-250 Rope sheave 250mm with bearing | Kinghitter Contractor mast weldment | 2 | 84 | 98 | 0 | 28 | — | — | |
| BR-SLEW-650 Slew ring 650mm | PB650 base weldment | 1 | 10 | 12 | 0 | 6 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 52 | 6 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 186 | 20 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 385 | 39 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Kinghitter Contractor mast weldment | 0.5 | 65 | 58.9 | 6.1 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 125 | 13 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Kinghitter Contractor mast weldment | 7 | 983 | 895 | 88 | 1.1 | — | — | |
| DC-KH-S3 Kinghitter Series 3 decal set | Decal and document set, KH | 1 | 47 | 40 | 7 | 1 | — | — | |
| DC-MANUAL-KH Kinghitter operator manual and parts book | Decal and document set, KH | 1 | 47 | 40 | 7 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, KH | 1 | 150 | 138 | 12 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, KH | 1 | 150 | 138 | 12 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 13.95 | 2.05 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 120 | 12 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 21 | 3 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 115 | 11 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 93 | 10 | 0 | — | — | |
| FB-PB650-CARRIAGE PB650 shift carriage | PB650 base weldment | 1 | 15 | 12 | 3 | 0 | — | — | |
| FB-PB650-FRAME PB650 base frame weldment | PB650 base weldment | 1 | 15 | 12 | 3 | 0 | — | — | |
| FB-PB650-LINK PB650 linkage arm pair | PB650 base weldment | 1 | 15 | 12 | 3 | 0 | — | — | |
| FB-PB650-MOUNT PB650 mast mount bracket | PB650 base weldment | 1 | 15 | 12 | 3 | 0 | — | — | |
| FB-PB650-PINPL PB650 pin plate set 20mm | PB650 base weldment | 1 | 15 | 12 | 3 | 0 | — | — | |
| FB-PB650-STAB PB650 stabiliser foot | PB650 base weldment | 1 | 15 | 12 | 3 | 0 | — | — | |
| FB-ULTRAG4-CARR Ultra G4 hammer carriage weldment | Kinghitter Contractor mast weldment | 1 | 10 | 18 | 0 | 13 | — | — | |
| FB-ULTRAG4-FOOT Ultra G4 mast foot plate 20mm | Kinghitter Contractor mast weldment | 1 | 22 | 18 | 4 | 0 | — | — | |
| FB-ULTRAG4-GUIDE Ultra G4 slide guide channel pair | Kinghitter Contractor mast weldment | 1 | 22 | 18 | 4 | 0 | — | — | |
| FB-ULTRAG4-HEAD Ultra G4 mast head weld assembly | Kinghitter Contractor mast weldment | 1 | 22 | 18 | 4 | 2 | — | — | |
| FB-ULTRAG4-LUG Ultra G4 lift lug set | Kinghitter Contractor mast weldment | 2 | 44 | 36 | 8 | 0 | — | — | |
| FB-ULTRAG4-ROPEG Ultra G4 rope guide bracket | Kinghitter Contractor mast weldment | 2 | 44 | 36 | 8 | 0 | — | — | |
| FB-ULTRAG4-STOP Ultra G4 carriage stop and buffer | Kinghitter Contractor mast weldment | 2 | 44 | 36 | 8 | 0 | — | — | |
| FB-ULTRAG4-TOP Ultra G4 mast top plate, laser cut 16mm | Kinghitter Contractor mast weldment | 1 | 22 | 18 | 4 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil ActiveBlock | 4 | 476 | 436 | 40 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 744 | 80 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Kinghitter Contractor mast weldment | 12 | 1554 | 1416 | 138 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | PB650 base weldment | 8 | 920 | 840 | 80 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | PB650 base weldment | 1 | 109 | 99 | 10 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Kinghitter Contractor mast weldment | 1 | 110 | 100 | 10 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil ActiveBlock | 4 | 476 | 436 | 40 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 1576 | 120 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Kinghitter Contractor mast weldment | 12 | 1964 | 1816 | 148 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | PB650 base weldment | 8 | 920 | 840 | 80 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 1488 | 160 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Kinghitter Contractor mast weldment | 24 | 2640 | 2400 | 240 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | PB650 base weldment | 16 | 1744 | 1584 | 160 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, large mast | 3 | 472.6 | 438.6 | 34 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, ActiveBlock | 1 | 129 | 119 | 10 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, large mast | 1 | 119 | 109 | 10 | 0 | — | — | |
| GS-MOUNT-RUB-75 Rubber mount 75mm, M16 | Hydraulic pack, ActiveBlock | 4 | 176 | 154 | 22 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, ActiveBlock | 4 | 635 | 579 | 56 | 0 | — | — | |
| HY-ACC-05 Accumulator 0.5L | Hydraulic pack, ActiveBlock | 1 | 47 | 41 | 6 | 0 | — | — | |
| HY-COOL-12V Oil cooler 12V, 8 plate | Hydraulic pack, ActiveBlock | 1 | 41 | 36 | 5 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, ActiveBlock | 1 | 141 | 129 | 12 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil ActiveBlock | 16 | 1872 | 1716 | 156 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, ActiveBlock | 6 | 586 | 538 | 48 | 2 | — | — | |
| HY-FIT-CBAL-08 Counterbalance valve 1/2 | Valve bank assembly, Walvoil ActiveBlock | 1 | 34 | 51 | 0 | 25 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, ActiveBlock | 9 | 651 | 597 | 54 | 1 | — | — | |
| HY-FIT-MANIF-4 Manifold block, 4 port | Hydraulic pack, ActiveBlock | 1 | 47 | 41 | 6 | 0 | — | — | |
| HY-FIT-QR-12 Quick release coupler 3/4 | Hose kit, large mast | 2 | 144 | 132 | 12 | 2 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil ActiveBlock | 1 | 131 | 119 | 12 | 0 | — | — | |
| HY-FIT-TEE-12 Tee 3/4 | Hose kit, large mast | 2 | 98 | 88 | 10 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 436 | 400 | 36 | 0 | — | — | |
| HY-HOSE-12-2400 Hose 2SN 12 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 210 | 188 | 22 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, ActiveBlock | 30 | 4838 | 4396 | 442 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, ActiveBlock | 1 | 141 | 129 | 12 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, large mast | 2 | 166 | 152 | 14 | 1 | — | — | |
| HY-RAM-ROT-63 Rotate ram 63 x 500, twin | PB650 base weldment | 1 | 16 | 24 | 0 | 14 | — | — | |
| HY-RAM-SIDE-63 Side shift ram 63 x 450 | PB650 base weldment | 1 | 38 | 34 | 4 | 0 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, large mast | 1 | 111 | 101 | 10 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, ActiveBlock | 1 | 141 | 129 | 12 | 0 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 103 | 12 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 260 | 26 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | PB650 base weldment | 2 | 282 | 258 | 24 | 2 | — | — | |
| MC-BUSH-60 Bush 60 ID, bronze | Kinghitter Contractor mast weldment | 4 | 115 | 95 | 20 | 1 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Ram set, large mast | 4 | 548 | 504 | 44 | 1 | — | — | |
| MC-PIN-60x320 Pin 60 x 320, hardened | Kinghitter Contractor mast weldment | 2 | 62 | 82 | 0 | 35 | — | — | |
| PL-CAP-END-250 Beam end cap 250UB | Kinghitter Contractor mast weldment | 2 | 104 | 94 | 10 | 0 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Kinghitter Contractor mast weldment | 2 | 220 | 200 | 20 | 1 | — | — | |
| PT-2K-KHRED Two pack enamel, Kinghitter red | Machine, at blast and paint | 3.2 | 131.3 | 108.8 | 22.5 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Kinghitter Contractor mast weldment | 21 | 2755 | 2509 | 246 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Kinghitter Contractor mast weldment | 3.5 | 498.2 | 455.1 | 43.1 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 145.7 | 14.4 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, large mast | 6 | 598 | 548 | 50 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | PB650 base weldment | 0.8 | 87.2 | 79.2 | 8 | 1 | — | — | |
| ST-IB350-250UB Infrabuild 350 I-beam 250UB31, mill run | Kinghitter Contractor mast weldment | 6.4 | 138.6 | 242 | 0 | 840 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | PB650 base weldment | 0.35 | 46 | 41.65 | 4.35 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | PB650 base weldment | 0.25 | 30 | 27.15 | 2.85 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | PB650 base weldment | 2.4 | 327.8 | 303.8 | 24 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 120 | 12 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 206 | 24 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 4.65 | 1.35 | 0 | — | — | |
| WR-PB650-HPIN PB650 hitch pin set | PB650 base weldment | 1 | 15 | 12 | 3 | 0 | — | — | |
| WR-PB650-TLPIN PB650 top link pin and clip | PB650 base weldment | 1 | 15 | 12 | 3 | 0 | — | — | |
| WR-ULTRAG4-PLATE Ultra G4 hammer wear plate set | Kinghitter Contractor mast weldment | 1 | 22 | 18 | 4 | 0 | — | — | |
| WR-ULTRAG4-ROPE Ultra G4 hoist rope, cut and swaged | Kinghitter Contractor mast weldment | 1 | 22 | 18 | 4 | 0 | — | — |