Mule / PB650 / RSE Turner Blocked CustomerQuikFence Australia Pty Ltd
Serialassigned at QC sign-off
MastMule
BasePB650
AttachmentsRSE Hydraulic Turner
Released9 Nov 2026
Final assembly2 Dec 2026
Promised to dealer24 Nov 2026
Convergence date
1 Dec 2026
Every sub-assembly is ready on or before 2 Dec 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Mule mast weldment
Not started, ready 1 Dec, needed 1 Dec
Onto the assembly bench 2 Dec 2026
Calculated completion 14 Dec 2026
Promised to dealer 24 Nov 2026
Production stages
Currently at stage 1 of 10 since 9 Nov 2026
- Released to production9 Nov
- Steel cut and prep10 Nov
- Fabrication and weld11 Nov
- Machining23 Nov
- Blast and paint25 Nov
- Hydraulic assembly30 Nov
- Final assembly2 Dec
- Test rig7 Dec
- QC sign-off8 Dec
- Ready for despatch9 Dec
Sub-assemblies
Platform
0 of 8 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Mule mast weldment Mast weldment · 6 day build · SA-MW-MULE | Not started | — | 0 / 17.7 | 1 Dec | 1 Dec | Fits, with 0 days to spare |
| PB650 base weldment Base weldment · 5 day build · SA-BW-PB650 | Not started | — | 0 / 16.1 | 1 Dec | 1 Dec | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 1 Dec | 1 Dec | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 6-bank Valve bank · 1 day build · SA-VB-SD5-6 | Not started | — | 0 / 1.5 | 1 Dec | 1 Dec | Fits, with 0 days to spare |
| Ram set, medium mast Ram set · 1 day build · SA-RS-M | Not started | — | 0 / 1.2 | 1 Dec | 1 Dec | Fits, with 0 days to spare |
| Hose kit, medium mast Hose kit · 1 day build · SA-HK-M | Not started | — | 0 / 1.5 | 1 Dec | 1 Dec | Fits, with 0 days to spare |
| Decal and document set, FP Decal set · 1 day build · SA-DS-FP | Not started | — | 0 / 0.5 | 1 Dec | 1 Dec | Fits, with 0 days to spare |
| RSE Hydraulic Turner Attachment kit · 2 day build · SA-AK-RSETURN | Not started | — | 0 / 4 | 1 Dec | 1 Dec | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $13,254
- Labour at standard, complete
- $3,082
- Hours booked
- 0 / 67
- Sold for
- A$22,464
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Released to production on 9 Nov 2026 against SO-26-1202. No correspondence is threaded to this machine.
Component requirements
StockNetting
106 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Mule mast weldment | 2 | 116 | 104 | 12 | 0 | — | — | |
| BR-SLEW-650 Slew ring 650mm | PB650 base weldment | 1 | 10 | 11 | 0 | 6 | — | — | |
| BR-THRUST-60 Thrust bearing 60mm | RSE Hydraulic Turner | 1 | 35 | 30 | 5 | 0 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 51 | 7 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 184 | 22 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 378 | 46 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Mule mast weldment | 0.5 | 65 | 58 | 7 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 123 | 15 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Mule mast weldment | 8.5 | 983 | 880.5 | 102.5 | 1.1 | — | — | |
| DC-FP-ULTRAG4 FencePro Ultra G4 decal set | Decal and document set, FP | 1 | 42 | 68 | 0 | 35 | — | — | |
| DC-MANUAL-FP FencePro operator manual and parts book | Decal and document set, FP | 1 | 72 | 68 | 4 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, FP | 1 | 150 | 136 | 14 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, FP | 1 | 150 | 136 | 14 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 13.8 | 2.2 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 118 | 14 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 20.8 | 3.2 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 113 | 13 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 92 | 11 | 0 | — | — | |
| FB-MULE-CARR Mule hammer carriage weldment | Mule mast weldment | 1 | 37 | 32 | 5 | 0 | — | — | |
| FB-MULE-FOOT Mule mast foot plate 20mm | Mule mast weldment | 1 | 37 | 32 | 5 | 0 | — | — | |
| FB-MULE-GUIDE Mule slide guide channel pair | Mule mast weldment | 1 | 37 | 32 | 5 | 0 | — | — | |
| FB-MULE-HEAD Mule mast head weld assembly | Mule mast weldment | 1 | 37 | 32 | 5 | 0 | — | — | |
| FB-MULE-LUG Mule lift lug set | Mule mast weldment | 2 | 74 | 64 | 10 | 0 | — | — | |
| FB-MULE-ROPEG Mule rope guide bracket | Mule mast weldment | 2 | 74 | 64 | 10 | 0 | — | — | |
| FB-MULE-STOP Mule carriage stop and buffer | Mule mast weldment | 2 | 74 | 64 | 10 | 0 | — | — | |
| FB-MULE-TOP Mule mast top plate, laser cut 16mm | Mule mast weldment | 1 | 37 | 32 | 5 | 0 | — | — | |
| FB-PB650-CARRIAGE PB650 shift carriage | PB650 base weldment | 1 | 15 | 11 | 4 | 0 | — | — | |
| FB-PB650-FRAME PB650 base frame weldment | PB650 base weldment | 1 | 15 | 11 | 4 | 0 | — | — | |
| FB-PB650-LINK PB650 linkage arm pair | PB650 base weldment | 1 | 15 | 11 | 4 | 0 | — | — | |
| FB-PB650-MOUNT PB650 mast mount bracket | PB650 base weldment | 1 | 15 | 11 | 4 | 0 | — | — | |
| FB-PB650-PINPL PB650 pin plate set 20mm | PB650 base weldment | 1 | 15 | 11 | 4 | 0 | — | — | |
| FB-PB650-STAB PB650 stabiliser foot | PB650 base weldment | 1 | 15 | 11 | 4 | 0 | — | — | |
| FB-RSETURN-ARM RSE Turner arm weldment | RSE Hydraulic Turner | 1 | 9 | 6 | 3 | 0 | — | — | |
| FB-RSETURN-BRKT RSE Turner mounting bracket | RSE Hydraulic Turner | 1 | 9 | 6 | 3 | 0 | — | — | |
| FB-RSETURN-CLAMP RSE Turner clamp assembly | RSE Hydraulic Turner | 1 | 9 | 6 | 3 | 0 | — | — | |
| FB-RSETURN-GUARD RSE Turner guard and shroud | RSE Hydraulic Turner | 1 | 9 | 6 | 3 | 0 | — | — | |
| FB-RSETURN-PLATE RSE Turner backing plate | RSE Hydraulic Turner | 1 | 9 | 6 | 3 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 6-bank | 4 | 476 | 432 | 44 | 0 | — | — | |
| FS-BOLT-M12-60 Bolt M12 x 60 grade 8.8, zinc | RSE Hydraulic Turner | 8 | 752 | 676 | 76 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 736 | 88 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Mule mast weldment | 12 | 1554 | 1404 | 150 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | PB650 base weldment | 8 | 920 | 832 | 88 | 0 | — | — | |
| FS-KIT-ATT Attachment fastener kit, bagged | RSE Hydraulic Turner | 1 | 46 | 41 | 5 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | PB650 base weldment | 1 | 109 | 98 | 11 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Mule mast weldment | 1 | 110 | 99 | 11 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 6-bank | 4 | 476 | 432 | 44 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | RSE Hydraulic Turner | 8 | 1696 | 1520 | 176 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Mule mast weldment | 12 | 1964 | 1776 | 188 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | PB650 base weldment | 8 | 920 | 832 | 88 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 1472 | 176 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Mule mast weldment | 24 | 2640 | 2376 | 264 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | PB650 base weldment | 16 | 1744 | 1568 | 176 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, medium mast | 3 | 472.6 | 429.6 | 43 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 117 | 12 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, medium mast | 1 | 119 | 108 | 11 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 344 | 32 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 572 | 63 | 0 | — | — | |
| HY-CTRL-CABLE-4 Cable control assembly, 4 lever | Valve bank assembly, Walvoil SD5 6-bank | 1 | 28 | 31 | 0 | 20 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 127 | 14 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 6-bank | 18 | 1872 | 1698 | 174 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 530 | 56 | 2 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, medium mast | 6 | 352 | 318 | 34 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 2 | 651 | 593 | 58 | 1 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, medium mast | 2 | 124 | 112 | 12 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 6-bank | 1 | 131 | 118 | 13 | 0 | — | — | |
| HY-FIT-TEE-08 Tee 1/2 | Hose kit, medium mast | 2 | 104 | 94 | 10 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 6-bank | 1 | 84 | 77 | 7 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, medium mast | 4 | 436 | 396 | 40 | 0 | — | — | |
| HY-HOSE-08-800 Hose 2SN 08 dash, 800mm, crimped both ends | RSE Hydraulic Turner | 2 | 38 | 30 | 8 | 0 | — | — | |
| HY-HOSE-10-2000 Hose 2SN 10 dash, 2000mm, crimped both ends | Hose kit, medium mast | 2 | 104 | 94 | 10 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 4329 | 509 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 127 | 14 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, medium mast | 1 | 166 | 151 | 15 | 1 | — | — | |
| HY-RAM-ROT-63 Rotate ram 63 x 500, twin | PB650 base weldment | 1 | 16 | 23 | 0 | 14 | — | — | |
| HY-RAM-SIDE-63 Side shift ram 63 x 450 | PB650 base weldment | 1 | 38 | 33 | 5 | 0 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, medium mast | 1 | 111 | 100 | 11 | 1 | — | — | |
| HY-RAM-TURN-40 RSE turner ram 40 x 200 | RSE Hydraulic Turner | 1 | 9 | 6 | 3 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 127 | 14 | 0 | — | — | |
| HY-VB-WV-SD5-6 Walvoil SD5 6-bank valve, cable control | Valve bank assembly, Walvoil SD5 6-bank | 1 | 28 | 31 | 0 | 9 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 102 | 13 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 255 | 31 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | PB650 base weldment | 2 | 282 | 252 | 30 | 2 | — | — | |
| MC-BUSH-40 Bush 40 ID, bronze | Mule mast weldment | 4 | 164 | 144 | 20 | 0 | — | — | |
| MC-PIN-40x220 Pin 40 x 220, hardened | Mule mast weldment | 2 | 318 | 286 | 32 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Ram set, medium mast | 4 | 548 | 500 | 48 | 1 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Mule mast weldment | 2 | 116 | 104 | 12 | 0 | — | — | |
| PL-INSERT-ADJ-25 Adjustable insert 25mm, threaded | Mule mast weldment | 8 | 464 | 424 | 40 | 0 | — | — | |
| PL-SLIDE-UHMW-M UHMW mast slide, medium, adjustable | Mule mast weldment | 4 | 192 | 172 | 20 | 1 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Mule mast weldment | 2 | 220 | 198 | 22 | 1 | — | — | |
| PT-2K-FPRED Two pack enamel, FencePro red | Machine, at blast and paint | 3.2 | 96.1 | 185.6 | 0 | 79.1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Mule mast weldment | 21 | 2755 | 2470 | 285 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Mule mast weldment | 4.1 | 498.2 | 446.6 | 51.6 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 142.8 | 17.3 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, medium mast | 4 | 598 | 544 | 54 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | PB650 base weldment | 0.8 | 87.2 | 78.4 | 8.8 | 1 | — | — | |
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | Mule mast weldment | 5 | 0 | 217 | 0 | 720 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | PB650 base weldment | 0.35 | 46 | 40.6 | 5.4 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | PB650 base weldment | 0.25 | 30 | 26.9 | 3.1 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | PB650 base weldment | 2.4 | 327.8 | 295.2 | 32.6 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 118 | 14 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 204 | 26 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 4.6 | 1.4 | 0 | — | — | |
| WR-MULE-PLATE Mule hammer wear plate set | Mule mast weldment | 1 | 37 | 32 | 5 | 0 | — | — | |
| WR-MULE-ROPE Mule hoist rope, cut and swaged | Mule mast weldment | 1 | 37 | 32 | 5 | 0 | — | — | |
| WR-PB650-HPIN PB650 hitch pin set | PB650 base weldment | 1 | 15 | 11 | 4 | 0 | — | — | |
| WR-PB650-TLPIN PB650 top link pin and clip | PB650 base weldment | 1 | 15 | 11 | 4 | 0 | — | — |