Contractor / PB650 Blocked CustomerWaikato Fencing Systems Ltd
Serialassigned at QC sign-off
MastKHCONTR
BasePB650
AttachmentsNone
Released21 Oct 2026
Final assembly25 Nov 2026
Promised to dealer4 Nov 2026
Convergence date
16 Dec 2026
The last sub-assembly is not ready until 16 Dec 2026, which is 15 working days after final assembly is scheduled to start on 25 Nov 2026. This machine cannot be built on its date.
Critical path
Valve bank assembly, Walvoil ActiveBlock
Not started, ready 16 Dec, needed 24 Nov
Onto the assembly bench 18 Dec 2026
Calculated completion 31 Dec 2026
Promised to dealer 4 Nov 2026
Production stages
Currently at stage 1 of 10 since 21 Oct 2026
- Released to production21 Oct
- Steel cut and prep22 Oct
- Fabrication and weld23 Oct
- Machining6 Nov
- Blast and paint12 Nov
- Hydraulic assembly18 Nov
- Final assembly25 Nov
- Test rig30 Nov
- QC sign-off2 Dec
- Ready for despatch3 Dec
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Kinghitter Contractor mast weldment Mast weldment · 10 day build · SA-MW-KHCONTR | Not started | — | 0 / 26 | 24 Nov | 24 Nov | Fits, with 0 days to spare |
| PB650 base weldment Base weldment · 5 day build · SA-BW-PB650 | Not started | — | 0 / 16.1 | 24 Nov | 24 Nov | Fits, with 0 days to spare |
| Hydraulic pack, ActiveBlock Hydraulic pack · 2 day build · SA-HP-AB | Not started | — | 0 / 3 | 24 Nov | 24 Nov | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil ActiveBlock Valve bank · 1 day build · SA-VB-AB | Not started | — | 0 / 2 | 24 Nov | 16 Dec | 16 days late. Nothing on order to cover it. |
| Ram set, large mast Ram set · 1 day build · SA-RS-L | Not started | — | 0 / 1.5 | 24 Nov | 24 Nov | Fits, with 0 days to spare |
| Hose kit, large mast Hose kit · 1 day build · SA-HK-L | Not started | — | 0 / 2 | 24 Nov | 24 Nov | Fits, with 0 days to spare |
| Decal and document set, KH Decal set · 1 day build · SA-DS-KH | Not started | — | 0 / 0.5 | 24 Nov | 24 Nov | Fits, with 0 days to spare |
6 shortages against this machine
| Item | Short | Cover | |
|---|---|---|---|
| PL-INSERT-ADJ-32 Adjustable insert 32mm, threaded | 8 | nothing | |
| PL-SLIDE-UHMW-L UHMW mast slide, large, adjustable | 4 | nothing | |
| HY-HOSE-12-3600 Hose 2SN 12 dash, 3600mm, crimped both ends | 2 | nothing | |
| EL-LOOM-PROP Wiring loom, proportional control | 1 | nothing | |
| HY-JOY-PROP Proportional joystick, ActiveBlock | 1 | nothing | |
| HY-VB-WV-AB Walvoil ActiveBlock proportional module | 1 | 16 Dec |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $14,852
- Labour at standard, complete
- $3,363
- Hours booked
- 0 / 73.1
- Sold for
- $33,975
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Released to production on 21 Oct 2026 against SO-26-1233. No correspondence is threaded to this machine.
Component requirements
StockNetting
100 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| PL-INSERT-ADJ-32 Adjustable insert 32mm, threaded | Kinghitter Contractor mast weldment | 8 | 232 | 352 | 0 | 116 | — | 8 | |
| PL-SLIDE-UHMW-L UHMW mast slide, large, adjustable | Kinghitter Contractor mast weldment | 4 | 88 | 176 | 0 | 82 | — | 4 | |
| HY-HOSE-12-3600 Hose 2SN 12 dash, 3600mm, crimped both ends | Hose kit, large mast | 2 | 100 | 114 | 0 | 0 | — | 2 | |
| EL-LOOM-PROP Wiring loom, proportional control | Valve bank assembly, Walvoil ActiveBlock | 1 | 19 | 37 | 0 | 19 | — | 1 | |
| HY-JOY-PROP Proportional joystick, ActiveBlock | Valve bank assembly, Walvoil ActiveBlock | 1 | 25 | 37 | 0 | 12 | — | 1 | |
| HY-VB-WV-AB Walvoil ActiveBlock proportional module | Valve bank assembly, Walvoil ActiveBlock | 1 | 15 | 29 | 0 | 21 | 16 Dec | 1 | |
| BR-SHEAVE-250 Rope sheave 250mm with bearing | Kinghitter Contractor mast weldment | 2 | 84 | 88 | 0 | 28 | — | — | |
| BR-SLEW-650 Slew ring 650mm | PB650 base weldment | 1 | 10 | 10 | 0 | 6 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 47.2 | 10.8 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 176 | 30 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 350 | 74 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Kinghitter Contractor mast weldment | 0.5 | 65 | 54.6 | 10.4 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 114 | 24 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Kinghitter Contractor mast weldment | 7 | 983 | 828.5 | 154.5 | 1.1 | — | — | |
| DC-KH-S3 Kinghitter Series 3 decal set | Decal and document set, KH | 1 | 47 | 38 | 9 | 1 | — | — | |
| DC-MANUAL-KH Kinghitter operator manual and parts book | Decal and document set, KH | 1 | 47 | 38 | 9 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, KH | 1 | 150 | 128 | 22 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, KH | 1 | 150 | 128 | 22 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 13.2 | 2.8 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 110 | 22 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 19.6 | 4.4 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 106 | 20 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 88 | 15 | 0 | — | — | |
| FB-PB650-CARRIAGE PB650 shift carriage | PB650 base weldment | 1 | 15 | 10 | 5 | 0 | — | — | |
| FB-PB650-FRAME PB650 base frame weldment | PB650 base weldment | 1 | 15 | 10 | 5 | 0 | — | — | |
| FB-PB650-LINK PB650 linkage arm pair | PB650 base weldment | 1 | 15 | 10 | 5 | 0 | — | — | |
| FB-PB650-MOUNT PB650 mast mount bracket | PB650 base weldment | 1 | 15 | 10 | 5 | 0 | — | — | |
| FB-PB650-PINPL PB650 pin plate set 20mm | PB650 base weldment | 1 | 15 | 10 | 5 | 0 | — | — | |
| FB-PB650-STAB PB650 stabiliser foot | PB650 base weldment | 1 | 15 | 10 | 5 | 0 | — | — | |
| FB-ULTRAG4-CARR Ultra G4 hammer carriage weldment | Kinghitter Contractor mast weldment | 1 | 10 | 16 | 0 | 13 | — | — | |
| FB-ULTRAG4-FOOT Ultra G4 mast foot plate 20mm | Kinghitter Contractor mast weldment | 1 | 22 | 16 | 6 | 0 | — | — | |
| FB-ULTRAG4-GUIDE Ultra G4 slide guide channel pair | Kinghitter Contractor mast weldment | 1 | 22 | 16 | 6 | 0 | — | — | |
| FB-ULTRAG4-HEAD Ultra G4 mast head weld assembly | Kinghitter Contractor mast weldment | 1 | 22 | 16 | 6 | 2 | — | — | |
| FB-ULTRAG4-LUG Ultra G4 lift lug set | Kinghitter Contractor mast weldment | 2 | 44 | 32 | 12 | 0 | — | — | |
| FB-ULTRAG4-ROPEG Ultra G4 rope guide bracket | Kinghitter Contractor mast weldment | 2 | 44 | 32 | 12 | 0 | — | — | |
| FB-ULTRAG4-STOP Ultra G4 carriage stop and buffer | Kinghitter Contractor mast weldment | 2 | 44 | 32 | 12 | 0 | — | — | |
| FB-ULTRAG4-TOP Ultra G4 mast top plate, laser cut 16mm | Kinghitter Contractor mast weldment | 1 | 22 | 16 | 6 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil ActiveBlock | 4 | 476 | 416 | 60 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 704 | 120 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Kinghitter Contractor mast weldment | 12 | 1554 | 1320 | 234 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | PB650 base weldment | 8 | 920 | 800 | 120 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | PB650 base weldment | 1 | 109 | 94 | 15 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Kinghitter Contractor mast weldment | 1 | 110 | 95 | 15 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil ActiveBlock | 4 | 476 | 416 | 60 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 1416 | 280 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Kinghitter Contractor mast weldment | 12 | 1964 | 1644 | 320 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | PB650 base weldment | 8 | 920 | 800 | 120 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 1408 | 240 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Kinghitter Contractor mast weldment | 24 | 2640 | 2280 | 360 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | PB650 base weldment | 16 | 1744 | 1504 | 240 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, large mast | 3 | 472.6 | 402.4 | 70.2 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, ActiveBlock | 1 | 129 | 112 | 17 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, large mast | 1 | 119 | 104 | 15 | 0 | — | — | |
| GS-MOUNT-RUB-75 Rubber mount 75mm, M16 | Hydraulic pack, ActiveBlock | 4 | 176 | 140 | 36 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, ActiveBlock | 4 | 635 | 544 | 91 | 0 | — | — | |
| HY-ACC-05 Accumulator 0.5L | Hydraulic pack, ActiveBlock | 1 | 47 | 37 | 10 | 0 | — | — | |
| HY-COOL-12V Oil cooler 12V, 8 plate | Hydraulic pack, ActiveBlock | 1 | 41 | 33 | 8 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, ActiveBlock | 1 | 141 | 120 | 21 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil ActiveBlock | 16 | 1872 | 1634 | 238 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, ActiveBlock | 6 | 586 | 506 | 80 | 2 | — | — | |
| HY-FIT-CBAL-08 Counterbalance valve 1/2 | Valve bank assembly, Walvoil ActiveBlock | 1 | 34 | 45 | 0 | 25 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, ActiveBlock | 9 | 651 | 563 | 88 | 1 | — | — | |
| HY-FIT-MANIF-4 Manifold block, 4 port | Hydraulic pack, ActiveBlock | 1 | 47 | 37 | 10 | 0 | — | — | |
| HY-FIT-QR-12 Quick release coupler 3/4 | Hose kit, large mast | 2 | 144 | 126 | 18 | 2 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil ActiveBlock | 1 | 131 | 112 | 19 | 0 | — | — | |
| HY-FIT-TEE-12 Tee 3/4 | Hose kit, large mast | 2 | 98 | 82 | 16 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 436 | 380 | 56 | 0 | — | — | |
| HY-HOSE-12-2400 Hose 2SN 12 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 210 | 176 | 34 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, ActiveBlock | 30 | 4838 | 4052 | 786 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, ActiveBlock | 1 | 141 | 120 | 21 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, large mast | 2 | 166 | 144 | 22 | 1 | — | — | |
| HY-RAM-ROT-63 Rotate ram 63 x 500, twin | PB650 base weldment | 1 | 16 | 21 | 0 | 14 | — | — | |
| HY-RAM-SIDE-63 Side shift ram 63 x 450 | PB650 base weldment | 1 | 38 | 31 | 7 | 0 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, large mast | 1 | 111 | 96 | 15 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, ActiveBlock | 1 | 141 | 120 | 21 | 0 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 96 | 19 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 236 | 50 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | PB650 base weldment | 2 | 282 | 236 | 46 | 2 | — | — | |
| MC-BUSH-60 Bush 60 ID, bronze | Kinghitter Contractor mast weldment | 4 | 115 | 79 | 36 | 1 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Ram set, large mast | 4 | 548 | 482 | 66 | 1 | — | — | |
| MC-PIN-60x320 Pin 60 x 320, hardened | Kinghitter Contractor mast weldment | 2 | 62 | 70 | 0 | 35 | — | — | |
| PL-CAP-END-250 Beam end cap 250UB | Kinghitter Contractor mast weldment | 2 | 104 | 88 | 16 | 0 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Kinghitter Contractor mast weldment | 2 | 220 | 190 | 30 | 1 | — | — | |
| PT-2K-KHRED Two pack enamel, Kinghitter red | Machine, at blast and paint | 3.2 | 131.3 | 102.4 | 28.9 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Kinghitter Contractor mast weldment | 21 | 2755 | 2322 | 433 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Kinghitter Contractor mast weldment | 3.5 | 498.2 | 419.8 | 78.4 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 132 | 28.1 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, large mast | 6 | 598 | 522 | 76 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | PB650 base weldment | 0.8 | 87.2 | 75.2 | 12 | 1 | — | — | |
| ST-IB350-250UB Infrabuild 350 I-beam 250UB31, mill run | Kinghitter Contractor mast weldment | 6.4 | 138.6 | 223.4 | 0 | 840 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | PB650 base weldment | 0.35 | 46 | 38.5 | 7.5 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | PB650 base weldment | 0.25 | 30 | 25.9 | 4.1 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | PB650 base weldment | 2.4 | 327.8 | 279.4 | 48.4 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 110 | 22 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 192 | 38 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 4.4 | 1.6 | 0 | — | — | |
| WR-PB650-HPIN PB650 hitch pin set | PB650 base weldment | 1 | 15 | 10 | 5 | 0 | — | — | |
| WR-PB650-TLPIN PB650 top link pin and clip | PB650 base weldment | 1 | 15 | 10 | 5 | 0 | — | — | |
| WR-ULTRAG4-PLATE Ultra G4 hammer wear plate set | Kinghitter Contractor mast weldment | 1 | 22 | 16 | 6 | 0 | — | — | |
| WR-ULTRAG4-ROPE Ultra G4 hoist rope, cut and swaged | Kinghitter Contractor mast weldment | 1 | 22 | 16 | 6 | 0 | — | — |