Original / Digger On track CustomerAGTEC Machinery Ltd
Serialassigned at QC sign-off
MastKHORIG
BaseDigger Hitch
AttachmentsNone
Released5 Oct 2026
Final assembly27 Oct 2026
Promised to dealer28 Sep 2026
Convergence date
26 Oct 2026
Every sub-assembly is ready on or before 27 Oct 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Kinghitter Original mast weldment
Not started, ready 26 Oct, needed 26 Oct
Onto the assembly bench 27 Oct 2026
Calculated completion 3 Nov 2026
Promised to dealer 28 Sep 2026
Production stages
Currently at stage 1 of 10 since 5 Oct 2026
- Released to production5 Oct
- Steel cut and prep6 Oct
- Fabrication and weld7 Oct
- Machining13 Oct
- Blast and paint16 Oct
- Hydraulic assembly21 Oct
- Final assembly27 Oct
- Test rig30 Oct
- QC sign-off2 Nov
- Ready for despatch3 Nov
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Kinghitter Original mast weldment Mast weldment · 5 day build · SA-MW-KHORIG | Not started | — | 0 / 13.5 | 26 Oct | 26 Oct | Fits, with 0 days to spare |
| Digger Hitch base weldment Base weldment · 3 day build · SA-BW-DIGGER | Not started | — | 0 / 10.2 | 26 Oct | 26 Oct | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 26 Oct | 26 Oct | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 4-bank Valve bank · 1 day build · SA-VB-SD5-4 | Not started | — | 0 / 1.2 | 26 Oct | 26 Oct | Fits, with 0 days to spare |
| Ram set, small mast Ram set · 1 day build · SA-RS-S | Not started | — | 0 / 1 | 26 Oct | 26 Oct | Fits, with 0 days to spare |
| Hose kit, small mast Hose kit · 1 day build · SA-HK-S | Not started | — | 0 / 1.2 | 26 Oct | 26 Oct | Fits, with 0 days to spare |
| Decal and document set, KH Decal set · 1 day build · SA-DS-KH | Not started | — | 0 / 0.5 | 26 Oct | 26 Oct | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $11,692
- Labour at standard, complete
- $2,397
- Hours booked
- 0 / 52.1
- Sold for
- $14,775
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Released to production on 5 Oct 2026 against SO-26-1212. No correspondence is threaded to this machine.
Component requirements
StockNetting
93 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Kinghitter Original mast weldment | 2 | 116 | 70 | 46 | 0 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 31.4 | 26.6 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 118 | 88 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 233 | 191 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Kinghitter Original mast weldment | 0.5 | 65 | 37.6 | 27.4 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 76 | 62 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Kinghitter Original mast weldment | 7 | 983 | 569 | 414 | 1.1 | — | — | |
| DC-KH-S3 Kinghitter Series 3 decal set | Decal and document set, KH | 1 | 47 | 27 | 20 | 1 | — | — | |
| DC-MANUAL-KH Kinghitter operator manual and parts book | Decal and document set, KH | 1 | 47 | 27 | 20 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, KH | 1 | 150 | 91 | 59 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, KH | 1 | 150 | 91 | 59 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 8.85 | 7.15 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 73 | 59 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 13 | 11 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 70 | 56 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 59 | 44 | 0 | — | — | |
| FB-DIGGER-CARRIAGE Digger shift carriage | Digger Hitch base weldment | 1 | 12 | 6 | 6 | 0 | — | — | |
| FB-DIGGER-FRAME Digger base frame weldment | Digger Hitch base weldment | 1 | 12 | 6 | 6 | 0 | — | — | |
| FB-DIGGER-LINK Digger linkage arm pair | Digger Hitch base weldment | 1 | 12 | 6 | 6 | 0 | — | — | |
| FB-DIGGER-MOUNT Digger mast mount bracket | Digger Hitch base weldment | 1 | 12 | 6 | 6 | 0 | — | — | |
| FB-DIGGER-PINPL Digger pin plate set 20mm | Digger Hitch base weldment | 1 | 12 | 6 | 6 | 0 | — | — | |
| FB-DIGGER-STAB Digger stabiliser foot | Digger Hitch base weldment | 1 | 12 | 6 | 6 | 0 | — | — | |
| FB-FARMTEK-CARR Farmtek hammer carriage weldment | Kinghitter Original mast weldment | 1 | 10 | 5 | 5 | 0 | — | — | |
| FB-FARMTEK-FOOT Farmtek mast foot plate 20mm | Kinghitter Original mast weldment | 1 | 10 | 5 | 5 | 0 | — | — | |
| FB-FARMTEK-GUIDE Farmtek slide guide channel pair | Kinghitter Original mast weldment | 1 | 10 | 5 | 5 | 0 | — | — | |
| FB-FARMTEK-HEAD Farmtek mast head weld assembly | Kinghitter Original mast weldment | 1 | 10 | 5 | 5 | 0 | — | — | |
| FB-FARMTEK-LUG Farmtek lift lug set | Kinghitter Original mast weldment | 2 | 20 | 10 | 10 | 0 | — | — | |
| FB-FARMTEK-ROPEG Farmtek rope guide bracket | Kinghitter Original mast weldment | 2 | 20 | 10 | 10 | 0 | — | — | |
| FB-FARMTEK-STOP Farmtek carriage stop and buffer | Kinghitter Original mast weldment | 2 | 20 | 10 | 10 | 0 | — | — | |
| FB-FARMTEK-TOP Farmtek mast top plate, laser cut 16mm | Kinghitter Original mast weldment | 1 | 10 | 5 | 5 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 300 | 176 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 472 | 352 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Kinghitter Original mast weldment | 12 | 1554 | 900 | 654 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | Digger Hitch base weldment | 8 | 920 | 552 | 368 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | Digger Hitch base weldment | 1 | 109 | 65 | 44 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Kinghitter Original mast weldment | 1 | 110 | 66 | 44 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 300 | 176 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 928 | 768 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Kinghitter Original mast weldment | 12 | 1964 | 1100 | 864 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | Digger Hitch base weldment | 8 | 920 | 552 | 368 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 944 | 704 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Kinghitter Original mast weldment | 24 | 2640 | 1584 | 1056 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | Digger Hitch base weldment | 16 | 1744 | 1040 | 704 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, small mast | 3 | 472.6 | 280.2 | 192.4 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 80 | 49 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, small mast | 1 | 119 | 75 | 44 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 240 | 136 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 387 | 248 | 0 | — | — | |
| HP-HITCH-QC Excavator quick coupler hitch | Digger Hitch base weldment | 1 | 18 | 9 | 9 | 0 | — | — | |
| HY-CTRL-CABLE-3 Cable control assembly, 3 lever | Valve bank assembly, Walvoil SD5 4-bank | 1 | 50 | 30 | 20 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 86 | 55 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 4-bank | 14 | 1872 | 1190 | 682 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 360 | 226 | 2 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, small mast | 4 | 352 | 224 | 128 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 2 | 651 | 410 | 241 | 1 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, small mast | 2 | 124 | 78 | 46 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 4-bank | 1 | 131 | 81 | 50 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 4-bank | 1 | 84 | 55 | 29 | 0 | — | — | |
| HY-HOSE-08-1600 Hose 2SN 08 dash, 1600mm, crimped both ends | Hose kit, small mast | 4 | 74 | 48 | 26 | 0 | — | — | |
| HY-HOSE-08-800 Hose 2SN 08 dash, 800mm, crimped both ends | Hose kit, small mast | 2 | 38 | 12 | 26 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 2877 | 1961 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 86 | 55 | 1 | — | — | |
| HY-RAM-ANGLE-50 Mast angle ram 50 x 250 | Ram set, small mast | 1 | 10 | 5 | 5 | 0 | — | — | |
| HY-RAM-SIDE-50 Side shift ram 50 x 300 | Digger Hitch base weldment | 1 | 15 | 8 | 7 | 0 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, small mast | 1 | 111 | 68 | 43 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 86 | 55 | 0 | — | — | |
| HY-VB-WV-SD5-4 Walvoil SD5 4-bank valve, cable control | Valve bank assembly, Walvoil SD5 4-bank | 1 | 45 | 30 | 15 | 24 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 65 | 50 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 157 | 129 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | Digger Hitch base weldment | 2 | 282 | 162 | 120 | 2 | — | — | |
| MC-BUSH-40 Bush 40 ID, bronze | Kinghitter Original mast weldment | 4 | 164 | 88 | 76 | 0 | — | — | |
| MC-PIN-40x220 Pin 40 x 220, hardened | Kinghitter Original mast weldment | 6 | 318 | 162 | 156 | 0 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Kinghitter Original mast weldment | 2 | 116 | 70 | 46 | 0 | — | — | |
| PL-INSERT-ADJ-20 Adjustable insert 20mm, threaded | Kinghitter Original mast weldment | 8 | 80 | 40 | 40 | 0 | — | — | |
| PL-SLIDE-UHMW-S UHMW mast slide, small, adjustable | Kinghitter Original mast weldment | 4 | 40 | 20 | 20 | 0 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Kinghitter Original mast weldment | 2 | 220 | 132 | 88 | 1 | — | — | |
| PT-2K-KHRED Two pack enamel, Kinghitter red | Machine, at blast and paint | 3.2 | 131.3 | 67.2 | 64.1 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Kinghitter Original mast weldment | 21 | 2755 | 1597 | 1158 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Kinghitter Original mast weldment | 3.5 | 498.2 | 287.5 | 210.7 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 87.7 | 72.4 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, small mast | 4 | 598 | 380 | 218 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | Digger Hitch base weldment | 0.8 | 87.2 | 52 | 35.2 | 1 | — | — | |
| ST-IB350-150UB Infrabuild 350 I-beam 150UB14, mill run | Kinghitter Original mast weldment | 4.4 | 42.9 | 21.2 | 21.7 | 180 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | Digger Hitch base weldment | 0.35 | 46 | 26.25 | 19.75 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | Digger Hitch base weldment | 0.25 | 30 | 17.85 | 12.15 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | Digger Hitch base weldment | 2.4 | 327.8 | 191.2 | 136.6 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 73 | 59 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 130 | 100 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 2.95 | 3.05 | 0 | — | — | |
| WR-DIGGER-HPIN Digger hitch pin set | Digger Hitch base weldment | 1 | 12 | 6 | 6 | 0 | — | — | |
| WR-DIGGER-TLPIN Digger top link pin and clip | Digger Hitch base weldment | 1 | 12 | 6 | 6 | 0 | — | — | |
| WR-FARMTEK-PLATE Farmtek hammer wear plate set | Kinghitter Original mast weldment | 1 | 10 | 5 | 5 | 0 | — | — | |
| WR-FARMTEK-ROPE Farmtek hoist rope, cut and swaged | Kinghitter Original mast weldment | 1 | 10 | 5 | 5 | 0 | — | — |