Series 4 / SM600 On track CustomerTimaru Tractor Services Ltd
Serialassigned at QC sign-off
MastKHS4
BaseSidemount SM600
AttachmentsNone
Released2 Oct 2026
Final assembly26 Oct 2026
Promised to dealer20 Oct 2026
Convergence date
23 Oct 2026
Every sub-assembly is ready on or before 26 Oct 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Kinghitter Series 4 mast weldment
Not started, ready 23 Oct, needed 23 Oct
Onto the assembly bench 26 Oct 2026
Calculated completion 30 Oct 2026
Promised to dealer 20 Oct 2026
Production stages
Currently at stage 1 of 10 since 2 Oct 2026
- Released to production2 Oct
- Steel cut and prep5 Oct
- Fabrication and weld6 Oct
- Machining15 Oct
- Blast and paint16 Oct
- Hydraulic assembly22 Oct
- Final assembly26 Oct
- Test rig28 Oct
- QC sign-off29 Oct
- Ready for despatch30 Oct
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Kinghitter Series 4 mast weldment Mast weldment · 9 day build · SA-MW-KHS4 | Not started | — | 0 / 23.3 | 23 Oct | 23 Oct | Fits, with 0 days to spare |
| Sidemount SM600 base weldment Base weldment · 3 day build · SA-BW-SM600 | Not started | — | 0 / 10.4 | 23 Oct | 23 Oct | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 23 Oct | 23 Oct | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 6-bank Valve bank · 1 day build · SA-VB-SD5-6 | Not started | — | 0 / 1.5 | 23 Oct | 23 Oct | Fits, with 0 days to spare |
| Ram set, large mast Ram set · 1 day build · SA-RS-L | Not started | — | 0 / 1.5 | 23 Oct | 23 Oct | Fits, with 0 days to spare |
| Hose kit, large mast Hose kit · 1 day build · SA-HK-L | Not started | — | 0 / 2 | 23 Oct | 23 Oct | Fits, with 0 days to spare |
| Decal and document set, KH Decal set · 1 day build · SA-DS-KH | Not started | — | 0 / 0.5 | 23 Oct | 23 Oct | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $11,576
- Labour at standard, complete
- $2,930
- Hours booked
- 0 / 63.7
- Sold for
- $25,950
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
93 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-250 Rope sheave 250mm with bearing | Kinghitter Series 4 mast weldment | 2 | 84 | 60 | 24 | 28 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 30.4 | 27.6 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 116 | 90 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 226 | 198 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Kinghitter Series 4 mast weldment | 0.5 | 65 | 36.7 | 28.3 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 74 | 64 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Kinghitter Series 4 mast weldment | 7 | 983 | 556 | 427 | 1.1 | — | — | |
| DC-KH-S3 Kinghitter Series 3 decal set | Decal and document set, KH | 1 | 47 | 26 | 21 | 1 | — | — | |
| DC-MANUAL-KH Kinghitter operator manual and parts book | Decal and document set, KH | 1 | 47 | 26 | 21 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, KH | 1 | 150 | 89 | 61 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, KH | 1 | 150 | 89 | 61 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 8.7 | 7.3 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 71 | 61 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 12.8 | 11.2 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 68 | 58 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 58 | 45 | 0 | — | — | |
| FB-SM600-CARRIAGE SM600 shift carriage | Sidemount SM600 base weldment | 1 | 15 | 8 | 7 | 0 | — | — | |
| FB-SM600-FRAME SM600 base frame weldment | Sidemount SM600 base weldment | 1 | 15 | 8 | 7 | 0 | — | — | |
| FB-SM600-LINK SM600 linkage arm pair | Sidemount SM600 base weldment | 1 | 15 | 8 | 7 | 0 | — | — | |
| FB-SM600-MOUNT SM600 mast mount bracket | Sidemount SM600 base weldment | 1 | 15 | 8 | 7 | 0 | — | — | |
| FB-SM600-PINPL SM600 pin plate set 20mm | Sidemount SM600 base weldment | 1 | 15 | 8 | 7 | 0 | — | — | |
| FB-SM600-STAB SM600 stabiliser foot | Sidemount SM600 base weldment | 1 | 15 | 8 | 7 | 0 | — | — | |
| FB-ULTRAG2S-CARR Ultra G2S hammer carriage weldment | Kinghitter Series 4 mast weldment | 1 | 23 | 15 | 8 | 0 | — | — | |
| FB-ULTRAG2S-FOOT Ultra G2S mast foot plate 20mm | Kinghitter Series 4 mast weldment | 1 | 23 | 15 | 8 | 0 | — | — | |
| FB-ULTRAG2S-GUIDE Ultra G2S slide guide channel pair | Kinghitter Series 4 mast weldment | 1 | 23 | 15 | 8 | 0 | — | — | |
| FB-ULTRAG2S-HEAD Ultra G2S mast head weld assembly | Kinghitter Series 4 mast weldment | 1 | 23 | 15 | 8 | 0 | — | — | |
| FB-ULTRAG2S-LUG Ultra G2S lift lug set | Kinghitter Series 4 mast weldment | 2 | 46 | 30 | 16 | 0 | — | — | |
| FB-ULTRAG2S-ROPEG Ultra G2S rope guide bracket | Kinghitter Series 4 mast weldment | 2 | 46 | 30 | 16 | 0 | — | — | |
| FB-ULTRAG2S-STOP Ultra G2S carriage stop and buffer | Kinghitter Series 4 mast weldment | 2 | 46 | 30 | 16 | 0 | — | — | |
| FB-ULTRAG2S-TOP Ultra G2S mast top plate, laser cut 16mm | Kinghitter Series 4 mast weldment | 1 | 23 | 15 | 8 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 6-bank | 4 | 476 | 296 | 180 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 464 | 360 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Kinghitter Series 4 mast weldment | 12 | 1554 | 888 | 666 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | Sidemount SM600 base weldment | 8 | 920 | 544 | 376 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | Sidemount SM600 base weldment | 1 | 109 | 64 | 45 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Kinghitter Series 4 mast weldment | 1 | 110 | 65 | 45 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 6-bank | 4 | 476 | 296 | 180 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 880 | 816 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Kinghitter Series 4 mast weldment | 12 | 1964 | 1060 | 904 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | Sidemount SM600 base weldment | 8 | 920 | 544 | 376 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 928 | 720 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Kinghitter Series 4 mast weldment | 24 | 2640 | 1560 | 1080 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | Sidemount SM600 base weldment | 16 | 1744 | 1024 | 720 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, large mast | 3 | 472.6 | 271.2 | 201.4 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 78 | 51 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, large mast | 1 | 119 | 74 | 45 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 232 | 144 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 380 | 255 | 0 | — | — | |
| HY-CTRL-CABLE-4 Cable control assembly, 4 lever | Valve bank assembly, Walvoil SD5 6-bank | 1 | 28 | 24 | 4 | 20 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 84 | 57 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 6-bank | 18 | 1872 | 1172 | 700 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 352 | 234 | 2 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 8 | 651 | 400 | 251 | 1 | — | — | |
| HY-FIT-QR-12 Quick release coupler 3/4 | Hose kit, large mast | 2 | 144 | 90 | 54 | 2 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 6-bank | 1 | 131 | 80 | 51 | 0 | — | — | |
| HY-FIT-TEE-12 Tee 3/4 | Hose kit, large mast | 2 | 98 | 56 | 42 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 6-bank | 1 | 84 | 54 | 30 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 436 | 276 | 160 | 0 | — | — | |
| HY-HOSE-12-2400 Hose 2SN 12 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 210 | 118 | 92 | 0 | — | — | |
| HY-HOSE-12-3600 Hose 2SN 12 dash, 3600mm, crimped both ends | Hose kit, large mast | 2 | 100 | 84 | 16 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 2810 | 2028 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 84 | 57 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, large mast | 2 | 166 | 104 | 62 | 1 | — | — | |
| HY-RAM-SIDE-63 Side shift ram 63 x 450 | Sidemount SM600 base weldment | 1 | 38 | 23 | 15 | 0 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, large mast | 1 | 111 | 67 | 44 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 84 | 57 | 0 | — | — | |
| HY-VB-WV-SD5-6 Walvoil SD5 6-bank valve, cable control | Valve bank assembly, Walvoil SD5 6-bank | 1 | 28 | 24 | 4 | 9 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 64 | 51 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 152 | 134 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | Sidemount SM600 base weldment | 2 | 282 | 156 | 126 | 2 | — | — | |
| MC-BUSH-50 Bush 50 ID, bronze | Kinghitter Series 4 mast weldment | 4 | 224 | 156 | 68 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Kinghitter Series 4 mast weldment | 6 | 548 | 352 | 196 | 1 | — | — | |
| PL-CAP-END-250 Beam end cap 250UB | Kinghitter Series 4 mast weldment | 2 | 104 | 60 | 44 | 0 | — | — | |
| PL-INSERT-ADJ-32 Adjustable insert 32mm, threaded | Kinghitter Series 4 mast weldment | 8 | 232 | 240 | 0 | 116 | — | — | |
| PL-SLIDE-UHMW-L UHMW mast slide, large, adjustable | Kinghitter Series 4 mast weldment | 4 | 88 | 120 | 0 | 82 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Kinghitter Series 4 mast weldment | 2 | 220 | 130 | 90 | 1 | — | — | |
| PT-2K-KHRED Two pack enamel, Kinghitter red | Machine, at blast and paint | 3.2 | 131.3 | 64 | 67.3 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Kinghitter Series 4 mast weldment | 21 | 2755 | 1558 | 1197 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Kinghitter Series 4 mast weldment | 3.5 | 498.2 | 279.6 | 218.6 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 84.8 | 75.3 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, large mast | 6 | 598 | 374 | 224 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | Sidemount SM600 base weldment | 0.8 | 87.2 | 51.2 | 36 | 1 | — | — | |
| ST-IB350-250UB Infrabuild 350 I-beam 250UB31, mill run | Kinghitter Series 4 mast weldment | 6 | 138.6 | 144.4 | 0 | 840 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | Sidemount SM600 base weldment | 0.35 | 46 | 25.2 | 20.8 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | Sidemount SM600 base weldment | 0.25 | 30 | 17.6 | 12.4 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | Sidemount SM600 base weldment | 2.4 | 327.8 | 182.6 | 145.2 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 71 | 61 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 128 | 102 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 2.9 | 3.1 | 0 | — | — | |
| WR-SM600-HPIN SM600 hitch pin set | Sidemount SM600 base weldment | 1 | 15 | 8 | 7 | 0 | — | — | |
| WR-SM600-TLPIN SM600 top link pin and clip | Sidemount SM600 base weldment | 1 | 15 | 8 | 7 | 0 | — | — | |
| WR-ULTRAG2S-PLATE Ultra G2S hammer wear plate set | Kinghitter Series 4 mast weldment | 1 | 23 | 15 | 8 | 0 | — | — | |
| WR-ULTRAG2S-ROPE Ultra G2S hoist rope, cut and swaged | Kinghitter Series 4 mast weldment | 1 | 23 | 15 | 8 | 0 | — | — |