Series 2 / RB800 On track CustomerCanterbury Fencing Supplies Ltd
Serialassigned at QC sign-off
MastKHS2
BaseRB800
AttachmentsNone
Released29 Sep 2026
Final assembly21 Oct 2026
Promised to dealer28 Oct 2026
Convergence date
20 Oct 2026
Every sub-assembly is ready on or before 21 Oct 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Kinghitter Series 2 mast weldment
Not started, ready 20 Oct, needed 20 Oct
Onto the assembly bench 21 Oct 2026
Calculated completion 29 Oct 2026
Promised to dealer 28 Oct 2026
Production stages
Currently at stage 1 of 10 since 29 Sep 2026
- Released to production29 Sep
- Steel cut and prep30 Sep
- Fabrication and weld1 Oct
- Machining8 Oct
- Blast and paint13 Oct
- Hydraulic assembly15 Oct
- Final assembly21 Oct
- Test rig23 Oct
- QC sign-off26 Oct
- Ready for despatch27 Oct
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Kinghitter Series 2 mast weldment Mast weldment · 6 day build · SA-MW-KHS2 | Not started | — | 0 / 17.7 | 20 Oct | 20 Oct | Fits, with 0 days to spare |
| RB800 base weldment Base weldment · 6 day build · SA-BW-RB800 | Not started | — | 0 / 19.2 | 20 Oct | 20 Oct | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 20 Oct | 20 Oct | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 6-bank Valve bank · 1 day build · SA-VB-SD5-6 | Not started | — | 0 / 1.5 | 20 Oct | 20 Oct | Fits, with 0 days to spare |
| Ram set, medium mast Ram set · 1 day build · SA-RS-M | Not started | — | 0 / 1.2 | 20 Oct | 20 Oct | Fits, with 0 days to spare |
| Hose kit, medium mast Hose kit · 1 day build · SA-HK-M | Not started | — | 0 / 1.5 | 20 Oct | 20 Oct | Fits, with 0 days to spare |
| Decal and document set, KH Decal set · 1 day build · SA-DS-KH | Not started | — | 0 / 0.5 | 20 Oct | 20 Oct | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $13,148
- Labour at standard, complete
- $3,041
- Hours booked
- 0 / 66.1
- Sold for
- $24,825
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Released to production on 29 Sep 2026 against SO-26-1219. No correspondence is threaded to this machine.
Component requirements
StockNetting
96 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Kinghitter Series 2 mast weldment | 2 | 116 | 66 | 50 | 0 | — | — | |
| BR-SLEW-800 Slew ring 800mm, internal gear | RB800 base weldment | 1 | 5 | 6 | 0 | 8 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 26.8 | 31.2 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 102 | 104 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 199 | 225 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Kinghitter Series 2 mast weldment | 0.5 | 65 | 32.7 | 32.3 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 65 | 73 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Kinghitter Series 2 mast weldment | 7 | 983 | 498.5 | 484.5 | 1.1 | — | — | |
| DC-KH-S3 Kinghitter Series 3 decal set | Decal and document set, KH | 1 | 47 | 25 | 22 | 1 | — | — | |
| DC-MANUAL-KH Kinghitter operator manual and parts book | Decal and document set, KH | 1 | 47 | 25 | 22 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, KH | 1 | 150 | 81 | 69 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, KH | 1 | 150 | 81 | 69 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 7.65 | 8.35 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 63 | 69 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 11.4 | 12.6 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 61 | 65 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 51 | 52 | 0 | — | — | |
| FB-MULE-CARR Mule hammer carriage weldment | Kinghitter Series 2 mast weldment | 1 | 37 | 20 | 17 | 0 | — | — | |
| FB-MULE-FOOT Mule mast foot plate 20mm | Kinghitter Series 2 mast weldment | 1 | 37 | 20 | 17 | 0 | — | — | |
| FB-MULE-GUIDE Mule slide guide channel pair | Kinghitter Series 2 mast weldment | 1 | 37 | 20 | 17 | 0 | — | — | |
| FB-MULE-HEAD Mule mast head weld assembly | Kinghitter Series 2 mast weldment | 1 | 37 | 20 | 17 | 0 | — | — | |
| FB-MULE-LUG Mule lift lug set | Kinghitter Series 2 mast weldment | 2 | 74 | 40 | 34 | 0 | — | — | |
| FB-MULE-ROPEG Mule rope guide bracket | Kinghitter Series 2 mast weldment | 2 | 74 | 40 | 34 | 0 | — | — | |
| FB-MULE-STOP Mule carriage stop and buffer | Kinghitter Series 2 mast weldment | 2 | 74 | 40 | 34 | 0 | — | — | |
| FB-MULE-TOP Mule mast top plate, laser cut 16mm | Kinghitter Series 2 mast weldment | 1 | 37 | 20 | 17 | 0 | — | — | |
| FB-RB800-CARRIAGE RB800 shift carriage | RB800 base weldment | 1 | 14 | 6 | 8 | 0 | — | — | |
| FB-RB800-FRAME RB800 base frame weldment | RB800 base weldment | 1 | 14 | 6 | 8 | 0 | — | — | |
| FB-RB800-LINK RB800 linkage arm pair | RB800 base weldment | 1 | 14 | 6 | 8 | 0 | — | — | |
| FB-RB800-MOUNT RB800 mast mount bracket | RB800 base weldment | 1 | 14 | 6 | 8 | 0 | — | — | |
| FB-RB800-PINPL RB800 pin plate set 20mm | RB800 base weldment | 1 | 14 | 6 | 8 | 0 | — | — | |
| FB-RB800-STAB RB800 stabiliser foot | RB800 base weldment | 1 | 14 | 6 | 8 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 6-bank | 4 | 476 | 268 | 208 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 408 | 416 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Kinghitter Series 2 mast weldment | 12 | 1554 | 804 | 750 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | RB800 base weldment | 8 | 920 | 472 | 448 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | RB800 base weldment | 1 | 109 | 57 | 52 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Kinghitter Series 2 mast weldment | 1 | 110 | 58 | 52 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 6-bank | 4 | 476 | 268 | 208 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 816 | 880 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Kinghitter Series 2 mast weldment | 12 | 1964 | 976 | 988 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | RB800 base weldment | 8 | 920 | 472 | 448 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 816 | 832 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Kinghitter Series 2 mast weldment | 24 | 2640 | 1392 | 1248 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | RB800 base weldment | 16 | 1744 | 912 | 832 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, medium mast | 3 | 472.6 | 250.2 | 222.4 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 71 | 58 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, medium mast | 1 | 119 | 67 | 52 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 220 | 156 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 339 | 296 | 0 | — | — | |
| HY-CTRL-CABLE-4 Cable control assembly, 4 lever | Valve bank assembly, Walvoil SD5 6-bank | 1 | 28 | 21 | 7 | 20 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 75 | 66 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 6-bank | 18 | 1872 | 1054 | 818 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 316 | 270 | 2 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, medium mast | 6 | 352 | 212 | 140 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 2 | 651 | 350 | 301 | 1 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, medium mast | 2 | 124 | 74 | 50 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 6-bank | 1 | 131 | 71 | 60 | 0 | — | — | |
| HY-FIT-TEE-08 Tee 1/2 | Hose kit, medium mast | 2 | 104 | 64 | 40 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 6-bank | 1 | 84 | 51 | 33 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, medium mast | 4 | 436 | 248 | 188 | 0 | — | — | |
| HY-HOSE-10-2000 Hose 2SN 10 dash, 2000mm, crimped both ends | Hose kit, medium mast | 2 | 104 | 64 | 40 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 2464 | 2374 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 75 | 66 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, medium mast | 1 | 166 | 92 | 74 | 1 | — | — | |
| HY-RAM-ROT-63 Rotate ram 63 x 500, twin | RB800 base weldment | 1 | 16 | 13 | 3 | 14 | — | — | |
| HY-RAM-SIDE-75 Side shift ram 75 x 900 | RB800 base weldment | 1 | 25 | 29 | 0 | 20 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, medium mast | 1 | 111 | 61 | 50 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 75 | 66 | 0 | — | — | |
| HY-VB-WV-SD5-6 Walvoil SD5 6-bank valve, cable control | Valve bank assembly, Walvoil SD5 6-bank | 1 | 28 | 21 | 7 | 9 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 55 | 60 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 134 | 152 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | RB800 base weldment | 2 | 282 | 138 | 144 | 2 | — | — | |
| MC-BUSH-40 Bush 40 ID, bronze | Kinghitter Series 2 mast weldment | 4 | 164 | 84 | 80 | 0 | — | — | |
| MC-PIN-40x220 Pin 40 x 220, hardened | Kinghitter Series 2 mast weldment | 2 | 318 | 146 | 172 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Ram set, medium mast | 4 | 548 | 316 | 232 | 1 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Kinghitter Series 2 mast weldment | 2 | 116 | 66 | 50 | 0 | — | — | |
| PL-INSERT-ADJ-25 Adjustable insert 25mm, threaded | Kinghitter Series 2 mast weldment | 8 | 464 | 264 | 200 | 0 | — | — | |
| PL-SLIDE-UHMW-M UHMW mast slide, medium, adjustable | Kinghitter Series 2 mast weldment | 4 | 192 | 112 | 80 | 1 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Kinghitter Series 2 mast weldment | 2 | 220 | 116 | 104 | 1 | — | — | |
| PT-2K-KHRED Two pack enamel, Kinghitter red | Machine, at blast and paint | 3.2 | 131.3 | 60.8 | 70.5 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Kinghitter Series 2 mast weldment | 21 | 2755 | 1389 | 1366 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Kinghitter Series 2 mast weldment | 3.5 | 498.2 | 251.1 | 247.1 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 74.9 | 85.2 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, medium mast | 4 | 598 | 336 | 262 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | RB800 base weldment | 0.8 | 87.2 | 45.6 | 41.6 | 1 | — | — | |
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | Kinghitter Series 2 mast weldment | 5 | 0 | 141.6 | 0 | 720 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | RB800 base weldment | 0.35 | 46 | 22.75 | 23.25 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | RB800 base weldment | 0.25 | 30 | 15.05 | 14.95 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | RB800 base weldment | 2.4 | 327.8 | 165.8 | 162 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 63 | 69 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 110 | 120 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 2.55 | 3.45 | 0 | — | — | |
| WR-MULE-PLATE Mule hammer wear plate set | Kinghitter Series 2 mast weldment | 1 | 37 | 20 | 17 | 0 | — | — | |
| WR-MULE-ROPE Mule hoist rope, cut and swaged | Kinghitter Series 2 mast weldment | 1 | 37 | 20 | 17 | 0 | — | — | |
| WR-RB800-HPIN RB800 hitch pin set | RB800 base weldment | 1 | 14 | 6 | 8 | 0 | — | — | |
| WR-RB800-TLPIN RB800 top link pin and clip | RB800 base weldment | 1 | 14 | 6 | 8 | 0 | — | — |