Original / SM900 On track CustomerTimaru Tractor Services Ltd
Serialassigned at QC sign-off
MastKHORIG
BaseSidemount SM900
AttachmentsNone
Released16 Sep 2026
Final assembly13 Oct 2026
Promised to dealer20 Oct 2026
Convergence date
12 Oct 2026
Every sub-assembly is ready on or before 13 Oct 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Kinghitter Original mast weldment
Not started, ready 12 Oct, needed 12 Oct
Onto the assembly bench 13 Oct 2026
Calculated completion 21 Oct 2026
Promised to dealer 20 Oct 2026
Production stages
Currently at stage 1 of 10 since 16 Sep 2026
- Released to production16 Sep
- Steel cut and prep17 Sep
- Fabrication and weld18 Sep
- Machining29 Sep
- Blast and paint1 Oct
- Hydraulic assembly6 Oct
- Final assembly13 Oct
- Test rig15 Oct
- QC sign-off19 Oct
- Ready for despatch20 Oct
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Kinghitter Original mast weldment Mast weldment · 5 day build · SA-MW-KHORIG | Not started | — | 0 / 13.5 | 12 Oct | 12 Oct | Fits, with 0 days to spare |
| Sidemount SM900 base weldment Base weldment · 4 day build · SA-BW-SM900 | Not started | — | 0 / 11.5 | 12 Oct | 12 Oct | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 12 Oct | 12 Oct | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 4-bank Valve bank · 1 day build · SA-VB-SD5-4 | Not started | — | 0 / 1.2 | 12 Oct | 12 Oct | Fits, with 0 days to spare |
| Ram set, small mast Ram set · 1 day build · SA-RS-S | Not started | — | 0 / 1 | 12 Oct | 12 Oct | Fits, with 0 days to spare |
| Hose kit, small mast Hose kit · 1 day build · SA-HK-S | Not started | — | 0 / 1.2 | 12 Oct | 12 Oct | Fits, with 0 days to spare |
| Decal and document set, KH Decal set · 1 day build · SA-DS-KH | Not started | — | 0 / 0.5 | 12 Oct | 12 Oct | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $10,014
- Labour at standard, complete
- $2,456
- Hours booked
- 0 / 53.4
- Sold for
- $15,975
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
93 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Kinghitter Original mast weldment | 2 | 116 | 60 | 56 | 0 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 21.4 | 36.6 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 82 | 124 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 159 | 265 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Kinghitter Original mast weldment | 0.5 | 65 | 26.9 | 38.1 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 52 | 86 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Kinghitter Original mast weldment | 7 | 983 | 409 | 574 | 1.1 | — | — | |
| DC-KH-S3 Kinghitter Series 3 decal set | Decal and document set, KH | 1 | 47 | 21 | 26 | 1 | — | — | |
| DC-MANUAL-KH Kinghitter operator manual and parts book | Decal and document set, KH | 1 | 47 | 21 | 26 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, KH | 1 | 150 | 68 | 82 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, KH | 1 | 150 | 68 | 82 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 6.15 | 9.85 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 50 | 82 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 9 | 15 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 48 | 78 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 41 | 62 | 0 | — | — | |
| FB-FARMTEK-CARR Farmtek hammer carriage weldment | Kinghitter Original mast weldment | 1 | 10 | 3 | 7 | 0 | — | — | |
| FB-FARMTEK-FOOT Farmtek mast foot plate 20mm | Kinghitter Original mast weldment | 1 | 10 | 3 | 7 | 0 | — | — | |
| FB-FARMTEK-GUIDE Farmtek slide guide channel pair | Kinghitter Original mast weldment | 1 | 10 | 3 | 7 | 0 | — | — | |
| FB-FARMTEK-HEAD Farmtek mast head weld assembly | Kinghitter Original mast weldment | 1 | 10 | 3 | 7 | 0 | — | — | |
| FB-FARMTEK-LUG Farmtek lift lug set | Kinghitter Original mast weldment | 2 | 20 | 6 | 14 | 0 | — | — | |
| FB-FARMTEK-ROPEG Farmtek rope guide bracket | Kinghitter Original mast weldment | 2 | 20 | 6 | 14 | 0 | — | — | |
| FB-FARMTEK-STOP Farmtek carriage stop and buffer | Kinghitter Original mast weldment | 2 | 20 | 6 | 14 | 0 | — | — | |
| FB-FARMTEK-TOP Farmtek mast top plate, laser cut 16mm | Kinghitter Original mast weldment | 1 | 10 | 3 | 7 | 0 | — | — | |
| FB-SM900-CARRIAGE SM900 shift carriage | Sidemount SM900 base weldment | 1 | 19 | 6 | 13 | 1 | — | — | |
| FB-SM900-FRAME SM900 base frame weldment | Sidemount SM900 base weldment | 1 | 19 | 6 | 13 | 1 | — | — | |
| FB-SM900-LINK SM900 linkage arm pair | Sidemount SM900 base weldment | 1 | 19 | 6 | 13 | 0 | — | — | |
| FB-SM900-MOUNT SM900 mast mount bracket | Sidemount SM900 base weldment | 1 | 19 | 6 | 13 | 0 | — | — | |
| FB-SM900-PINPL SM900 pin plate set 20mm | Sidemount SM900 base weldment | 1 | 19 | 6 | 13 | 0 | — | — | |
| FB-SM900-STAB SM900 stabiliser foot | Sidemount SM900 base weldment | 1 | 19 | 6 | 13 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 228 | 248 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 328 | 496 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Kinghitter Original mast weldment | 12 | 1554 | 648 | 906 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | Sidemount SM900 base weldment | 8 | 920 | 392 | 528 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | Sidemount SM900 base weldment | 1 | 109 | 47 | 62 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Kinghitter Original mast weldment | 1 | 110 | 48 | 62 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 228 | 248 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 640 | 1056 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Kinghitter Original mast weldment | 12 | 1964 | 772 | 1192 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | Sidemount SM900 base weldment | 8 | 920 | 392 | 528 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 656 | 992 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Kinghitter Original mast weldment | 24 | 2640 | 1152 | 1488 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | Sidemount SM900 base weldment | 16 | 1744 | 752 | 992 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, small mast | 3 | 472.6 | 205 | 267.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 60 | 69 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, small mast | 1 | 119 | 57 | 62 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 188 | 188 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 287 | 348 | 0 | — | — | |
| HY-CTRL-CABLE-3 Cable control assembly, 3 lever | Valve bank assembly, Walvoil SD5 4-bank | 1 | 50 | 27 | 23 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 64 | 77 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 4-bank | 14 | 1872 | 892 | 980 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 266 | 320 | 2 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, small mast | 4 | 352 | 198 | 154 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 2 | 651 | 281 | 370 | 1 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, small mast | 2 | 124 | 68 | 56 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 4-bank | 1 | 131 | 61 | 70 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 4-bank | 1 | 84 | 44 | 40 | 0 | — | — | |
| HY-HOSE-08-1600 Hose 2SN 08 dash, 1600mm, crimped both ends | Hose kit, small mast | 4 | 74 | 36 | 38 | 0 | — | — | |
| HY-HOSE-08-800 Hose 2SN 08 dash, 800mm, crimped both ends | Hose kit, small mast | 2 | 38 | 8 | 30 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 2097 | 2741 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 64 | 77 | 1 | — | — | |
| HY-RAM-ANGLE-50 Mast angle ram 50 x 250 | Ram set, small mast | 1 | 10 | 3 | 7 | 0 | — | — | |
| HY-RAM-SIDE-75 Side shift ram 75 x 900 | Sidemount SM900 base weldment | 1 | 25 | 23 | 2 | 20 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, small mast | 1 | 111 | 52 | 59 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 64 | 77 | 0 | — | — | |
| HY-VB-WV-SD5-4 Walvoil SD5 4-bank valve, cable control | Valve bank assembly, Walvoil SD5 4-bank | 1 | 45 | 27 | 18 | 24 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 45 | 70 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 107 | 179 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | Sidemount SM900 base weldment | 2 | 282 | 114 | 168 | 2 | — | — | |
| MC-BUSH-40 Bush 40 ID, bronze | Kinghitter Original mast weldment | 4 | 164 | 76 | 88 | 0 | — | — | |
| MC-PIN-40x220 Pin 40 x 220, hardened | Kinghitter Original mast weldment | 6 | 318 | 110 | 208 | 0 | — | — | |
| PL-BUSH-NYL-40 Nylon bush 40 x 50 | Sidemount SM900 base weldment | 4 | 128 | 56 | 72 | 0 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Kinghitter Original mast weldment | 2 | 116 | 60 | 56 | 0 | — | — | |
| PL-INSERT-ADJ-20 Adjustable insert 20mm, threaded | Kinghitter Original mast weldment | 8 | 80 | 24 | 56 | 0 | — | — | |
| PL-SLIDE-UHMW-S UHMW mast slide, small, adjustable | Kinghitter Original mast weldment | 4 | 40 | 12 | 28 | 0 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Kinghitter Original mast weldment | 2 | 220 | 96 | 124 | 1 | — | — | |
| PT-2K-KHRED Two pack enamel, Kinghitter red | Machine, at blast and paint | 3.2 | 131.3 | 48 | 83.3 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Kinghitter Original mast weldment | 21 | 2755 | 1141 | 1614 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Kinghitter Original mast weldment | 3.5 | 498.2 | 205.5 | 292.7 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 59.7 | 100.4 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, small mast | 4 | 598 | 278 | 320 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | Sidemount SM900 base weldment | 0.8 | 87.2 | 37.6 | 49.6 | 1 | — | — | |
| ST-IB350-150UB Infrabuild 350 I-beam 150UB14, mill run | Kinghitter Original mast weldment | 4.4 | 42.9 | 12.6 | 30.3 | 180 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | Sidemount SM900 base weldment | 0.35 | 46 | 18.55 | 27.45 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | Sidemount SM900 base weldment | 0.25 | 30 | 12.55 | 17.45 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | Sidemount SM900 base weldment | 2.4 | 327.8 | 134.2 | 193.6 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 50 | 82 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 90 | 140 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 2.05 | 3.95 | 0 | — | — | |
| WR-FARMTEK-PLATE Farmtek hammer wear plate set | Kinghitter Original mast weldment | 1 | 10 | 3 | 7 | 0 | — | — | |
| WR-FARMTEK-ROPE Farmtek hoist rope, cut and swaged | Kinghitter Original mast weldment | 1 | 10 | 3 | 7 | 0 | — | — | |
| WR-SM900-HPIN SM900 hitch pin set | Sidemount SM900 base weldment | 1 | 19 | 6 | 13 | 0 | — | — | |
| WR-SM900-TLPIN SM900 top link pin and clip | Sidemount SM900 base weldment | 1 | 19 | 6 | 13 | 0 | — | — |