Grassfarmer 3113C / 1200L / Mounted On track CustomerGiltrap AgriZone Ltd
Serialassigned at QC sign-off
AttachmentsNone
Released11 Sep 2026
Final assembly12 Oct 2026
Promised to dealer19 Oct 2026
Convergence date
9 Oct 2026
Every sub-assembly is ready on or before 12 Oct 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Aitchison 3113 drill frame weldment
Not started, ready 9 Oct, needed 9 Oct
Onto the assembly bench 12 Oct 2026
Calculated completion 20 Oct 2026
Promised to dealer 19 Oct 2026
Production stages
Currently at stage 1 of 10 since 11 Sep 2026
- Released to production11 Sep
- Steel cut and prep14 Sep
- Fabrication and weld15 Sep
- Machining28 Sep
- Blast and paint1 Oct
- Hydraulic assembly7 Oct
- Final assembly12 Oct
- Test rig14 Oct
- QC sign-off15 Oct
- Ready for despatch16 Oct
Sub-assemblies
Platform
0 of 5 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Aitchison 3113 drill frame weldment Frame weldment · 8 day build · SA-FW-AI3113 | Not started | — | 0 / 26.5 | 9 Oct | 9 Oct | Fits, with 0 days to spare |
| Aitchison 1200L seed box Seed box · 4 day build · SA-SB-AI1200 | Not started | — | 0 / 9.5 | 9 Oct | 9 Oct | Fits, with 0 days to spare |
| Aitchison inverted-T coulter bank Coulter bank · 3 day build · SA-CB-AI | Not started | — | 0 / 9 | 9 Oct | 9 Oct | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 9 Oct | 9 Oct | Fits, with 0 days to spare |
| Decal and document set, AI Decal set · 1 day build · SA-DS-AI | Not started | — | 0 / 0.5 | 9 Oct | 9 Oct | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $18,025
- Labour at standard, complete
- $3,565
- Hours booked
- 0 / 77.5
- Sold for
- $28,324
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Released to production on 11 Sep 2026 against SO-26-1228. No correspondence is threaded to this machine.
Component requirements
StockNetting
47 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| AI-BOX-SEED-1200 Seed box 1200L with agitator | Aitchison 1200L seed box | 1 | 4 | 0 | 4 | 0 | — | — | |
| AI-COULTER-INV-T Inverted-T coulter assembly | Aitchison inverted-T coulter bank | 14 | 140 | 28 | 112 | 0 | — | — | |
| AI-FAN-HYD Hydraulic fan unit for air seeder | Aitchison 1200L seed box | 1 | 3 | 2 | 1 | 4 | — | — | |
| AI-FRAME-3113 Aitchison Grassfarmer 3113 frame | Aitchison 3113 drill frame weldment | 1 | 2 | 0 | 2 | 0 | — | — | |
| AI-METER-SEED Seed metering unit, fluted roller | Aitchison 1200L seed box | 2 | 12 | 4 | 8 | 9 | — | — | |
| AI-TUBE-SEED Seed delivery tube | Aitchison inverted-T coulter bank | 14 | 180 | 36 | 144 | 1 | — | — | |
| AI-WHEEL-PRESS Press wheel assembly | Aitchison 3113 drill frame weldment | 8 | 80 | 16 | 64 | 2 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.6 | 58 | 20.4 | 37.6 | 0 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 4 | 424 | 152 | 272 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Aitchison 3113 drill frame weldment | 0.4 | 65 | 26 | 39 | 2 | — | — | |
| CN-GREASE-EP2 Grease EP2 | Machine, at blast and paint | 0.8 | 24.6 | 6.8 | 17.8 | 0 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 50 | 88 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Aitchison 3113 drill frame weldment | 6 | 983 | 396 | 587 | 1.1 | — | — | |
| DC-AI-GRASS Aitchison Grassfarmer decal set | Decal and document set, AI | 1 | 10 | 2 | 8 | 0 | — | — | |
| DC-MANUAL-AI Aitchison operator manual and parts book | Decal and document set, AI | 1 | 10 | 2 | 8 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, AI | 1 | 150 | 66 | 84 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, AI | 1 | 150 | 66 | 84 | 1 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 48 | 84 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 46 | 80 | 1 | — | — | |
| FS-BOLT-M12-40 Bolt M12 x 40 grade 8.8, zinc | Aitchison 1200L seed box | 12 | 120 | 24 | 96 | 0 | — | — | |
| FS-BOLT-M12-60 Bolt M12 x 60 grade 8.8, zinc | Aitchison inverted-T coulter bank | 28 | 752 | 248 | 504 | 0 | — | — | |
| FS-BOLT-M16-120 Bolt M16 x 120 grade 8.8, zinc | Aitchison 3113 drill frame weldment | 16 | 280 | 56 | 224 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Aitchison 1200L seed box | 40 | 1696 | 592 | 1104 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Aitchison 3113 drill frame weldment | 16 | 1964 | 732 | 1232 | 2 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Aitchison 1200L seed box | 6 | 472.6 | 196 | 276.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 58 | 71 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 184 | 192 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 1 | 635 | 280 | 355 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 62 | 79 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 256 | 330 | 2 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 2 | 651 | 270 | 381 | 1 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 2026 | 2812 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 62 | 79 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 62 | 79 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 3 | 286 | 102 | 184 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | Aitchison 3113 drill frame weldment | 4 | 282 | 108 | 174 | 2 | — | — | |
| MC-PIN-40x220 Pin 40 x 220, hardened | Aitchison inverted-T coulter bank | 14 | 318 | 96 | 222 | 0 | — | — | |
| MX-WHEEL-KIT Wheel and hub kit, pair | Aitchison 3113 drill frame weldment | 1 | 23 | 6 | 17 | 2 | — | — | |
| PT-2K-AIBLUE Two pack enamel, Aitchison blue | Machine, at blast and paint | 5.4 | 54 | 10.8 | 43.2 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Aitchison 3113 drill frame weldment | 18 | 2755 | 1102 | 1653 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Aitchison 3113 drill frame weldment | 4.4 | 498.2 | 197.6 | 300.6 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.8 | 160.1 | 56.8 | 103.3 | 1 | — | — | |
| SP-GAS-STRUT-600 Gas strut 600N | Aitchison 1200L seed box | 2 | 20 | 4 | 16 | 0 | — | — | |
| SP-SPRING-COMP-40 Compression spring 40mm | Aitchison inverted-T coulter bank | 14 | 140 | 28 | 112 | 0 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | Aitchison 3113 drill frame weldment | 0.7 | 46 | 17.5 | 28.5 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | Aitchison 3113 drill frame weldment | 6.2 | 327.8 | 125.6 | 202.2 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 48 | 84 | 0 | — | — |