Mule-V / MS350 / Chainsaw Holder On track CustomerWaikato Fencing Systems Ltd
Serialassigned at QC sign-off
MastMule-V
BaseMS350 Mastshift
AttachmentsChainsaw Holder
Released17 Sep 2026
Final assembly14 Oct 2026
Promised to dealer22 Sep 2026
Convergence date
13 Oct 2026
Every sub-assembly is ready on or before 14 Oct 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Mule-V mast weldment
Not started, ready 13 Oct, needed 13 Oct
Onto the assembly bench 14 Oct 2026
Calculated completion 22 Oct 2026
Promised to dealer 22 Sep 2026
Production stages
Currently at stage 1 of 10 since 17 Sep 2026
- Released to production17 Sep
- Steel cut and prep18 Sep
- Fabrication and weld21 Sep
- Machining30 Sep
- Blast and paint5 Oct
- Hydraulic assembly9 Oct
- Final assembly14 Oct
- Test rig20 Oct
- QC sign-off21 Oct
- Ready for despatch22 Oct
Sub-assemblies
Platform
0 of 8 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Mule-V mast weldment Mast weldment · 8 day build · SA-MW-MULEV | Not started | — | 0 / 21.2 | 13 Oct | 13 Oct | Fits, with 0 days to spare |
| MS350 Mastshift base weldment Base weldment · 4 day build · SA-BW-MS350 | Not started | — | 0 / 12.3 | 13 Oct | 13 Oct | Fits, with 0 days to spare |
| Hydraulic pack, ActiveBlock Hydraulic pack · 2 day build · SA-HP-AB | Not started | — | 0 / 3 | 13 Oct | 13 Oct | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil ActiveBlock Valve bank · 1 day build · SA-VB-AB | Not started | — | 0 / 2 | 13 Oct | 13 Oct | Fits, with 0 days to spare |
| Ram set, medium mast Ram set · 1 day build · SA-RS-M | Not started | — | 0 / 1.2 | 13 Oct | 13 Oct | Fits, with 0 days to spare |
| Hose kit, medium mast Hose kit · 1 day build · SA-HK-M | Not started | — | 0 / 1.5 | 13 Oct | 13 Oct | Fits, with 0 days to spare |
| Decal and document set, FP Decal set · 1 day build · SA-DS-FP | Not started | — | 0 / 0.5 | 13 Oct | 13 Oct | Fits, with 0 days to spare |
| Chainsaw Holder Attachment kit · 2 day build · SA-AK-CHAINSAW | Not started | — | 0 / 3.2 | 13 Oct | 13 Oct | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $12,188
- Labour at standard, complete
- $3,077
- Hours booked
- 0 / 66.9
- Sold for
- $23,025
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
106 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Mule-V mast weldment | 2 | 116 | 62 | 54 | 0 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 22.6 | 35.4 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 88 | 118 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 168 | 256 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Mule-V mast weldment | 0.5 | 65 | 28.4 | 36.6 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 55 | 83 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Mule-V mast weldment | 8.5 | 983 | 430 | 553 | 1.1 | — | — | |
| DC-FP-ULTRAG4 FencePro Ultra G4 decal set | Decal and document set, FP | 1 | 42 | 37 | 5 | 35 | — | — | |
| DC-MANUAL-FP FencePro operator manual and parts book | Decal and document set, FP | 1 | 72 | 37 | 35 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, FP | 1 | 150 | 71 | 79 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, FP | 1 | 150 | 71 | 79 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 6.6 | 9.4 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 53 | 79 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 9.6 | 14.4 | 0 | — | — | |
| EL-LOOM-PROP Wiring loom, proportional control | Valve bank assembly, Walvoil ActiveBlock | 1 | 19 | 18 | 1 | 19 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 51 | 75 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 44 | 59 | 0 | — | — | |
| FB-CHAINSAW-ARM Chainsaw Holder arm weldment | Chainsaw Holder | 1 | 3 | 0 | 3 | 0 | — | — | |
| FB-CHAINSAW-BRKT Chainsaw Holder mounting bracket | Chainsaw Holder | 1 | 3 | 0 | 3 | 0 | — | — | |
| FB-CHAINSAW-CLAMP Chainsaw Holder clamp assembly | Chainsaw Holder | 1 | 3 | 0 | 3 | 0 | — | — | |
| FB-CHAINSAW-GUARD Chainsaw Holder guard and shroud | Chainsaw Holder | 1 | 3 | 0 | 3 | 0 | — | — | |
| FB-CHAINSAW-PLATE Chainsaw Holder backing plate | Chainsaw Holder | 1 | 3 | 0 | 3 | 0 | — | — | |
| FB-MS350-CARRIAGE MS350 shift carriage | MS350 Mastshift base weldment | 1 | 8 | 3 | 5 | 0 | — | — | |
| FB-MS350-FRAME MS350 base frame weldment | MS350 Mastshift base weldment | 1 | 8 | 3 | 5 | 0 | — | — | |
| FB-MS350-LINK MS350 linkage arm pair | MS350 Mastshift base weldment | 1 | 8 | 3 | 5 | 0 | — | — | |
| FB-MS350-MOUNT MS350 mast mount bracket | MS350 Mastshift base weldment | 1 | 8 | 3 | 5 | 0 | — | — | |
| FB-MS350-PINPL MS350 pin plate set 20mm | MS350 Mastshift base weldment | 1 | 8 | 3 | 5 | 0 | — | — | |
| FB-MS350-STAB MS350 stabiliser foot | MS350 Mastshift base weldment | 1 | 8 | 3 | 5 | 0 | — | — | |
| FB-MULEV-CARR Mule-V hammer carriage weldment | Mule-V mast weldment | 1 | 11 | 7 | 4 | 0 | — | — | |
| FB-MULEV-FOOT Mule-V mast foot plate 20mm | Mule-V mast weldment | 1 | 11 | 7 | 4 | 0 | — | — | |
| FB-MULEV-GUIDE Mule-V slide guide channel pair | Mule-V mast weldment | 1 | 11 | 7 | 4 | 0 | — | — | |
| FB-MULEV-HEAD Mule-V mast head weld assembly | Mule-V mast weldment | 1 | 11 | 7 | 4 | 0 | — | — | |
| FB-MULEV-LUG Mule-V lift lug set | Mule-V mast weldment | 2 | 22 | 14 | 8 | 0 | — | — | |
| FB-MULEV-ROPEG Mule-V rope guide bracket | Mule-V mast weldment | 2 | 22 | 14 | 8 | 0 | — | — | |
| FB-MULEV-STOP Mule-V carriage stop and buffer | Mule-V mast weldment | 2 | 22 | 14 | 8 | 0 | — | — | |
| FB-MULEV-TOP Mule-V mast top plate, laser cut 16mm | Mule-V mast weldment | 1 | 11 | 7 | 4 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil ActiveBlock | 4 | 476 | 240 | 236 | 0 | — | — | |
| FS-BOLT-M12-60 Bolt M12 x 60 grade 8.8, zinc | Chainsaw Holder | 8 | 752 | 276 | 476 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 352 | 472 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Mule-V mast weldment | 12 | 1554 | 684 | 870 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | MS350 Mastshift base weldment | 8 | 920 | 416 | 504 | 0 | — | — | |
| FS-KIT-ATT Attachment fastener kit, bagged | Chainsaw Holder | 1 | 46 | 20 | 26 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | MS350 Mastshift base weldment | 1 | 109 | 50 | 59 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Mule-V mast weldment | 1 | 110 | 51 | 59 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil ActiveBlock | 4 | 476 | 240 | 236 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Chainsaw Holder | 8 | 1696 | 664 | 1032 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Mule-V mast weldment | 12 | 1964 | 808 | 1156 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | MS350 Mastshift base weldment | 8 | 920 | 416 | 504 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 704 | 944 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Mule-V mast weldment | 24 | 2640 | 1224 | 1416 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | MS350 Mastshift base weldment | 16 | 1744 | 800 | 944 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, medium mast | 4.2 | 472.6 | 214 | 258.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, ActiveBlock | 1 | 129 | 63 | 66 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, medium mast | 1 | 119 | 60 | 59 | 0 | — | — | |
| GS-MOUNT-RUB-75 Rubber mount 75mm, M16 | Hydraulic pack, ActiveBlock | 4 | 176 | 68 | 108 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, ActiveBlock | 4 | 635 | 302 | 333 | 0 | — | — | |
| HY-ACC-05 Accumulator 0.5L | Hydraulic pack, ActiveBlock | 1 | 47 | 18 | 29 | 0 | — | — | |
| HY-COOL-12V Oil cooler 12V, 8 plate | Hydraulic pack, ActiveBlock | 1 | 41 | 16 | 25 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, ActiveBlock | 1 | 141 | 67 | 74 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil ActiveBlock | 16 | 1872 | 940 | 932 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, ActiveBlock | 6 | 586 | 280 | 306 | 2 | — | — | |
| HY-FIT-CBAL-08 Counterbalance valve 1/2 | Valve bank assembly, Walvoil ActiveBlock | 1 | 34 | 22 | 12 | 25 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, medium mast | 6 | 352 | 202 | 150 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, ActiveBlock | 3 | 651 | 300 | 351 | 1 | — | — | |
| HY-FIT-MANIF-4 Manifold block, 4 port | Hydraulic pack, ActiveBlock | 1 | 47 | 18 | 29 | 0 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, medium mast | 2 | 124 | 70 | 54 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil ActiveBlock | 1 | 131 | 64 | 67 | 0 | — | — | |
| HY-FIT-TEE-08 Tee 1/2 | Hose kit, medium mast | 2 | 104 | 62 | 42 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, medium mast | 4 | 436 | 224 | 212 | 0 | — | — | |
| HY-HOSE-10-2000 Hose 2SN 10 dash, 2000mm, crimped both ends | Hose kit, medium mast | 2 | 104 | 62 | 42 | 0 | — | — | |
| HY-JOY-PROP Proportional joystick, ActiveBlock | Valve bank assembly, Walvoil ActiveBlock | 1 | 25 | 18 | 7 | 12 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, ActiveBlock | 30 | 4838 | 2197 | 2641 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, ActiveBlock | 1 | 141 | 67 | 74 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, medium mast | 1 | 166 | 81 | 85 | 1 | — | — | |
| HY-RAM-SIDE-63 Side shift ram 63 x 450 | MS350 Mastshift base weldment | 1 | 38 | 17 | 21 | 0 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, medium mast | 1 | 111 | 55 | 56 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, ActiveBlock | 1 | 141 | 67 | 74 | 0 | — | — | |
| HY-VB-WV-AB Walvoil ActiveBlock proportional module | Valve bank assembly, Walvoil ActiveBlock | 1 | 15 | 14 | 1 | 21 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 48 | 67 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 113 | 173 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | MS350 Mastshift base weldment | 2 | 282 | 120 | 162 | 2 | — | — | |
| MC-BUSH-50 Bush 50 ID, bronze | Mule-V mast weldment | 4 | 224 | 112 | 112 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Mule-V mast weldment | 6 | 548 | 280 | 268 | 1 | — | — | |
| MC-SPACER-SET Spacer set, mast carriage | MS350 Mastshift base weldment | 1 | 8 | 3 | 5 | 0 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Mule-V mast weldment | 2 | 116 | 62 | 54 | 0 | — | — | |
| PL-INSERT-ADJ-25 Adjustable insert 25mm, threaded | Mule-V mast weldment | 8 | 464 | 248 | 216 | 0 | — | — | |
| PL-SLIDE-UHMW-M UHMW mast slide, medium, adjustable | Mule-V mast weldment | 4 | 192 | 108 | 84 | 1 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Mule-V mast weldment | 2 | 220 | 102 | 118 | 1 | — | — | |
| PT-2K-FPRED Two pack enamel, FencePro red | Machine, at blast and paint | 3.2 | 96.1 | 86.4 | 9.7 | 79.1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Mule-V mast weldment | 21 | 2755 | 1204 | 1551 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Mule-V mast weldment | 4.1 | 498.2 | 216 | 282.2 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 63 | 97.1 | 1 | — | — | |
| SP-LATCH-OVER Over centre latch | Chainsaw Holder | 1 | 3 | 0 | 3 | 0 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, medium mast | 4 | 598 | 294 | 304 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | MS350 Mastshift base weldment | 0.8 | 87.2 | 40 | 47.2 | 1 | — | — | |
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | Mule-V mast weldment | 5 | 0 | 136.6 | 0 | 720 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | MS350 Mastshift base weldment | 0.35 | 46 | 19.6 | 26.4 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | MS350 Mastshift base weldment | 0.25 | 30 | 13.3 | 16.7 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | MS350 Mastshift base weldment | 2.4 | 327.8 | 141.4 | 186.4 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 53 | 79 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 96 | 134 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 2.2 | 3.8 | 0 | — | — | |
| WR-MS350-HPIN MS350 hitch pin set | MS350 Mastshift base weldment | 1 | 8 | 3 | 5 | 0 | — | — | |
| WR-MS350-TLPIN MS350 top link pin and clip | MS350 Mastshift base weldment | 1 | 8 | 3 | 5 | 0 | — | — | |
| WR-MULEV-PLATE Mule-V hammer wear plate set | Mule-V mast weldment | 1 | 11 | 7 | 4 | 0 | — | — | |
| WR-MULEV-ROPE Mule-V hoist rope, cut and swaged | Mule-V mast weldment | 1 | 11 | 7 | 4 | 0 | — | — |