Series 4 / SM1000 On track Serialassigned at QC sign-off
MastKHS4
BaseSidemount SM1000
AttachmentsNone
Released10 Sep 2026
Final assembly8 Oct 2026
Promised to dealer28 Sep 2026
Convergence date
7 Oct 2026
Every sub-assembly is ready on or before 8 Oct 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Kinghitter Series 4 mast weldment
Not started, ready 7 Oct, needed 7 Oct
Onto the assembly bench 8 Oct 2026
Calculated completion 15 Oct 2026
Promised to dealer 28 Sep 2026
Production stages
Currently at stage 1 of 10 since 10 Sep 2026
- Released to production10 Sep
- Steel cut and prep11 Sep
- Fabrication and weld14 Sep
- Machining24 Sep
- Blast and paint29 Sep
- Hydraulic assembly5 Oct
- Final assembly8 Oct
- Test rig13 Oct
- QC sign-off14 Oct
- Ready for despatch15 Oct
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Kinghitter Series 4 mast weldment Mast weldment · 9 day build · SA-MW-KHS4 | Not started | — | 0 / 23.3 | 7 Oct | 7 Oct | Fits, with 0 days to spare |
| Sidemount SM1000 base weldment Base weldment · 4 day build · SA-BW-SM1000 | Not started | — | 0 / 13.4 | 7 Oct | 7 Oct | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 7 Oct | 7 Oct | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 6-bank Valve bank · 1 day build · SA-VB-SD5-6 | Not started | — | 0 / 1.5 | 7 Oct | 7 Oct | Fits, with 0 days to spare |
| Ram set, large mast Ram set · 1 day build · SA-RS-L | Not started | — | 0 / 1.5 | 7 Oct | 7 Oct | Fits, with 0 days to spare |
| Hose kit, large mast Hose kit · 1 day build · SA-HK-L | Not started | — | 0 / 2 | 7 Oct | 7 Oct | Fits, with 0 days to spare |
| Decal and document set, KH Decal set · 1 day build · SA-DS-KH | Not started | — | 0 / 0.5 | 7 Oct | 7 Oct | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $11,702
- Labour at standard, complete
- $3,068
- Hours booked
- 0 / 66.7
- Sold for
- A$28,575
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Released to production on 10 Sep 2026 against SO-26-1226. No correspondence is threaded to this machine.
Component requirements
StockNetting
94 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-250 Rope sheave 250mm with bearing | Kinghitter Series 4 mast weldment | 2 | 84 | 30 | 54 | 28 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 19.2 | 38.8 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 74 | 132 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 143 | 281 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Kinghitter Series 4 mast weldment | 0.5 | 65 | 24.5 | 40.5 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 47 | 91 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Kinghitter Series 4 mast weldment | 7 | 983 | 372 | 611 | 1.1 | — | — | |
| DC-KH-S3 Kinghitter Series 3 decal set | Decal and document set, KH | 1 | 47 | 20 | 27 | 1 | — | — | |
| DC-MANUAL-KH Kinghitter operator manual and parts book | Decal and document set, KH | 1 | 47 | 20 | 27 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, KH | 1 | 150 | 63 | 87 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, KH | 1 | 150 | 63 | 87 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 5.55 | 10.45 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 45 | 87 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 8.2 | 15.8 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 43 | 83 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 37 | 66 | 0 | — | — | |
| FB-SM1000-CARRIAGE SM1000 shift carriage | Sidemount SM1000 base weldment | 1 | 13 | 7 | 6 | 0 | — | — | |
| FB-SM1000-FRAME SM1000 base frame weldment | Sidemount SM1000 base weldment | 1 | 13 | 7 | 6 | 0 | — | — | |
| FB-SM1000-LINK SM1000 linkage arm pair | Sidemount SM1000 base weldment | 1 | 13 | 7 | 6 | 0 | — | — | |
| FB-SM1000-MOUNT SM1000 mast mount bracket | Sidemount SM1000 base weldment | 1 | 13 | 7 | 6 | 0 | — | — | |
| FB-SM1000-PINPL SM1000 pin plate set 20mm | Sidemount SM1000 base weldment | 1 | 13 | 7 | 6 | 0 | — | — | |
| FB-SM1000-STAB SM1000 stabiliser foot | Sidemount SM1000 base weldment | 1 | 13 | 7 | 6 | 0 | — | — | |
| FB-ULTRAG2S-CARR Ultra G2S hammer carriage weldment | Kinghitter Series 4 mast weldment | 1 | 23 | 9 | 14 | 0 | — | — | |
| FB-ULTRAG2S-FOOT Ultra G2S mast foot plate 20mm | Kinghitter Series 4 mast weldment | 1 | 23 | 9 | 14 | 0 | — | — | |
| FB-ULTRAG2S-GUIDE Ultra G2S slide guide channel pair | Kinghitter Series 4 mast weldment | 1 | 23 | 9 | 14 | 0 | — | — | |
| FB-ULTRAG2S-HEAD Ultra G2S mast head weld assembly | Kinghitter Series 4 mast weldment | 1 | 23 | 9 | 14 | 0 | — | — | |
| FB-ULTRAG2S-LUG Ultra G2S lift lug set | Kinghitter Series 4 mast weldment | 2 | 46 | 18 | 28 | 0 | — | — | |
| FB-ULTRAG2S-ROPEG Ultra G2S rope guide bracket | Kinghitter Series 4 mast weldment | 2 | 46 | 18 | 28 | 0 | — | — | |
| FB-ULTRAG2S-STOP Ultra G2S carriage stop and buffer | Kinghitter Series 4 mast weldment | 2 | 46 | 18 | 28 | 0 | — | — | |
| FB-ULTRAG2S-TOP Ultra G2S mast top plate, laser cut 16mm | Kinghitter Series 4 mast weldment | 1 | 23 | 9 | 14 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 6-bank | 4 | 476 | 212 | 264 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 296 | 528 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Kinghitter Series 4 mast weldment | 12 | 1554 | 600 | 954 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | Sidemount SM1000 base weldment | 8 | 920 | 360 | 560 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | Sidemount SM1000 base weldment | 1 | 109 | 43 | 66 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Kinghitter Series 4 mast weldment | 1 | 110 | 44 | 66 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 6-bank | 4 | 476 | 212 | 264 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 552 | 1144 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Kinghitter Series 4 mast weldment | 12 | 1964 | 696 | 1268 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | Sidemount SM1000 base weldment | 8 | 920 | 360 | 560 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 592 | 1056 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Kinghitter Series 4 mast weldment | 24 | 2640 | 1056 | 1584 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | Sidemount SM1000 base weldment | 16 | 1744 | 688 | 1056 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, large mast | 3 | 472.6 | 187 | 285.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 55 | 74 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, large mast | 1 | 119 | 53 | 66 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 172 | 204 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 265 | 370 | 0 | — | — | |
| HY-CTRL-CABLE-4 Cable control assembly, 4 lever | Valve bank assembly, Walvoil SD5 6-bank | 1 | 28 | 15 | 13 | 20 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 59 | 82 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 6-bank | 18 | 1872 | 826 | 1046 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 244 | 342 | 2 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 8 | 651 | 250 | 401 | 1 | — | — | |
| HY-FIT-QR-12 Quick release coupler 3/4 | Hose kit, large mast | 2 | 144 | 52 | 92 | 2 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 6-bank | 1 | 131 | 57 | 74 | 0 | — | — | |
| HY-FIT-TEE-12 Tee 3/4 | Hose kit, large mast | 2 | 98 | 32 | 66 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 6-bank | 1 | 84 | 41 | 43 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 436 | 200 | 236 | 0 | — | — | |
| HY-HOSE-12-2400 Hose 2SN 12 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 210 | 68 | 142 | 0 | — | — | |
| HY-HOSE-12-3600 Hose 2SN 12 dash, 3600mm, crimped both ends | Hose kit, large mast | 2 | 100 | 48 | 52 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 1930 | 2908 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 59 | 82 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, large mast | 2 | 166 | 70 | 96 | 1 | — | — | |
| HY-RAM-SIDE-75 Side shift ram 75 x 900 | Sidemount SM1000 base weldment | 1 | 25 | 21 | 4 | 20 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, large mast | 1 | 111 | 49 | 62 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 59 | 82 | 0 | — | — | |
| HY-VB-WV-SD5-6 Walvoil SD5 6-bank valve, cable control | Valve bank assembly, Walvoil SD5 6-bank | 1 | 28 | 15 | 13 | 9 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 41 | 74 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 96 | 190 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | Sidemount SM1000 base weldment | 2 | 282 | 102 | 180 | 2 | — | — | |
| MC-BUSH-50 Bush 50 ID, bronze | Kinghitter Series 4 mast weldment | 4 | 224 | 96 | 128 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Kinghitter Series 4 mast weldment | 6 | 548 | 252 | 296 | 1 | — | — | |
| PL-BUSH-NYL-40 Nylon bush 40 x 50 | Sidemount SM1000 base weldment | 4 | 128 | 52 | 76 | 0 | — | — | |
| PL-CAP-END-250 Beam end cap 250UB | Kinghitter Series 4 mast weldment | 2 | 104 | 30 | 74 | 0 | — | — | |
| PL-INSERT-ADJ-32 Adjustable insert 32mm, threaded | Kinghitter Series 4 mast weldment | 8 | 232 | 120 | 112 | 116 | — | — | |
| PL-SLIDE-UHMW-L UHMW mast slide, large, adjustable | Kinghitter Series 4 mast weldment | 4 | 88 | 60 | 28 | 82 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Kinghitter Series 4 mast weldment | 2 | 220 | 88 | 132 | 1 | — | — | |
| PT-2K-KHRED Two pack enamel, Kinghitter red | Machine, at blast and paint | 3.2 | 131.3 | 44.8 | 86.5 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Kinghitter Series 4 mast weldment | 21 | 2755 | 1039 | 1716 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Kinghitter Series 4 mast weldment | 3.5 | 498.2 | 185.9 | 312.3 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 53.5 | 106.6 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, large mast | 6 | 598 | 256 | 342 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | Sidemount SM1000 base weldment | 0.8 | 87.2 | 34.4 | 52.8 | 1 | — | — | |
| ST-IB350-250UB Infrabuild 350 I-beam 250UB31, mill run | Kinghitter Series 4 mast weldment | 6 | 138.6 | 71.6 | 67 | 840 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | Sidemount SM1000 base weldment | 0.35 | 46 | 16.45 | 29.55 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | Sidemount SM1000 base weldment | 0.25 | 30 | 11.55 | 18.45 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | Sidemount SM1000 base weldment | 2.4 | 327.8 | 118.4 | 209.4 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 45 | 87 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 82 | 148 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 1.85 | 4.15 | 0 | — | — | |
| WR-SM1000-HPIN SM1000 hitch pin set | Sidemount SM1000 base weldment | 1 | 13 | 7 | 6 | 0 | — | — | |
| WR-SM1000-TLPIN SM1000 top link pin and clip | Sidemount SM1000 base weldment | 1 | 13 | 7 | 6 | 0 | — | — | |
| WR-ULTRAG2S-PLATE Ultra G2S hammer wear plate set | Kinghitter Series 4 mast weldment | 1 | 23 | 9 | 14 | 0 | — | — | |
| WR-ULTRAG2S-ROPE Ultra G2S hoist rope, cut and swaged | Kinghitter Series 4 mast weldment | 1 | 23 | 9 | 14 | 0 | — | — |