Mule-V / Digger / RSE Turner On track CustomerHorowhenua Machinery Ltd
Serialassigned at QC sign-off
MastMule-V
BaseDigger Hitch
AttachmentsRSE Hydraulic Turner
Released3 Sep 2026
Final assembly30 Sep 2026
Promised to dealer29 Sep 2026
Convergence date
29 Sep 2026
Every sub-assembly is ready on or before 30 Sep 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Mule-V mast weldment
Not started, ready 29 Sep, needed 29 Sep
Onto the assembly bench 30 Sep 2026
Calculated completion 7 Oct 2026
Promised to dealer 29 Sep 2026
Production stages
Currently at stage 3 of 10 since 7 Sep 2026
- Released to production3 Sep
- Steel cut and prep4 Sep
- Fabrication and weld7 Sep
- Machining16 Sep
- Blast and paint17 Sep
- Hydraulic assembly23 Sep
- Final assembly30 Sep
- Test rig5 Oct
- QC sign-off6 Oct
- Ready for despatch7 Oct
Sub-assemblies
Platform
0 of 8 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Mule-V mast weldment Mast weldment · 8 day build · SA-MW-MULEV | Not started | — | 0 / 21.2 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| Digger Hitch base weldment Base weldment · 3 day build · SA-BW-DIGGER | Not started | — | 0 / 10.2 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| Hydraulic pack, ActiveBlock Hydraulic pack · 2 day build · SA-HP-AB | Not started | — | 0 / 3 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil ActiveBlock Valve bank · 1 day build · SA-VB-AB | Not started | — | 0 / 2 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| Ram set, medium mast Ram set · 1 day build · SA-RS-M | Not started | — | 0 / 1.2 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| Hose kit, medium mast Hose kit · 1 day build · SA-HK-M | Not started | — | 0 / 1.5 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| Decal and document set, FP Decal set · 1 day build · SA-DS-FP | Not started | — | 0 / 0.5 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
| RSE Hydraulic Turner Attachment kit · 2 day build · SA-AK-RSETURN | Not started | — | 0 / 4 | 29 Sep | 29 Sep | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $14,192
- Labour at standard, complete
- $3,018
- Hours booked
- 0 / 65.6
- Sold for
- $23,484
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
108 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Mule-V mast weldment | 2 | 116 | 36 | 80 | 0 | — | — | |
| BR-THRUST-60 Thrust bearing 60mm | RSE Hydraulic Turner | 1 | 35 | 6 | 29 | 0 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 10.4 | 47.6 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 46 | 160 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 78 | 346 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Mule-V mast weldment | 0.5 | 65 | 15.4 | 49.6 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 26 | 112 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Mule-V mast weldment | 8.5 | 983 | 234 | 749 | 1.1 | — | — | |
| DC-FP-ULTRAG4 FencePro Ultra G4 decal set | Decal and document set, FP | 1 | 42 | 25 | 17 | 35 | — | — | |
| DC-MANUAL-FP FencePro operator manual and parts book | Decal and document set, FP | 1 | 72 | 25 | 47 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, FP | 1 | 150 | 44 | 106 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, FP | 1 | 150 | 44 | 106 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 3.45 | 12.55 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 26 | 106 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 5.2 | 18.8 | 0 | — | — | |
| EL-LOOM-PROP Wiring loom, proportional control | Valve bank assembly, Walvoil ActiveBlock | 1 | 19 | 8 | 11 | 19 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 26 | 100 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 23 | 80 | 0 | — | — | |
| FB-DIGGER-CARRIAGE Digger shift carriage | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| FB-DIGGER-FRAME Digger base frame weldment | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| FB-DIGGER-LINK Digger linkage arm pair | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| FB-DIGGER-MOUNT Digger mast mount bracket | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| FB-DIGGER-PINPL Digger pin plate set 20mm | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| FB-DIGGER-STAB Digger stabiliser foot | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| FB-MULEV-CARR Mule-V hammer carriage weldment | Mule-V mast weldment | 1 | 11 | 4 | 7 | 0 | — | — | |
| FB-MULEV-FOOT Mule-V mast foot plate 20mm | Mule-V mast weldment | 1 | 11 | 4 | 7 | 0 | — | — | |
| FB-MULEV-GUIDE Mule-V slide guide channel pair | Mule-V mast weldment | 1 | 11 | 4 | 7 | 0 | — | — | |
| FB-MULEV-HEAD Mule-V mast head weld assembly | Mule-V mast weldment | 1 | 11 | 4 | 7 | 0 | — | — | |
| FB-MULEV-LUG Mule-V lift lug set | Mule-V mast weldment | 2 | 22 | 8 | 14 | 0 | — | — | |
| FB-MULEV-ROPEG Mule-V rope guide bracket | Mule-V mast weldment | 2 | 22 | 8 | 14 | 0 | — | — | |
| FB-MULEV-STOP Mule-V carriage stop and buffer | Mule-V mast weldment | 2 | 22 | 8 | 14 | 0 | — | — | |
| FB-MULEV-TOP Mule-V mast top plate, laser cut 16mm | Mule-V mast weldment | 1 | 11 | 4 | 7 | 0 | — | — | |
| FB-RSETURN-ARM RSE Turner arm weldment | RSE Hydraulic Turner | 1 | 9 | 0 | 9 | 0 | — | — | |
| FB-RSETURN-BRKT RSE Turner mounting bracket | RSE Hydraulic Turner | 1 | 9 | 0 | 9 | 0 | — | — | |
| FB-RSETURN-CLAMP RSE Turner clamp assembly | RSE Hydraulic Turner | 1 | 9 | 0 | 9 | 0 | — | — | |
| FB-RSETURN-GUARD RSE Turner guard and shroud | RSE Hydraulic Turner | 1 | 9 | 0 | 9 | 0 | — | — | |
| FB-RSETURN-PLATE RSE Turner backing plate | RSE Hydraulic Turner | 1 | 9 | 0 | 9 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil ActiveBlock | 4 | 476 | 156 | 320 | 0 | — | — | |
| FS-BOLT-M12-60 Bolt M12 x 60 grade 8.8, zinc | RSE Hydraulic Turner | 8 | 752 | 120 | 632 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 184 | 640 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Mule-V mast weldment | 12 | 1554 | 414 | 1140 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | Digger Hitch base weldment | 8 | 920 | 232 | 688 | 0 | — | — | |
| FS-KIT-ATT Attachment fastener kit, bagged | RSE Hydraulic Turner | 1 | 46 | 12 | 34 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | Digger Hitch base weldment | 1 | 109 | 29 | 80 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Mule-V mast weldment | 1 | 110 | 30 | 80 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil ActiveBlock | 4 | 476 | 156 | 320 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | RSE Hydraulic Turner | 8 | 1696 | 304 | 1392 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Mule-V mast weldment | 12 | 1964 | 444 | 1520 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | Digger Hitch base weldment | 8 | 920 | 232 | 688 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 368 | 1280 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Mule-V mast weldment | 24 | 2640 | 720 | 1920 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | Digger Hitch base weldment | 16 | 1744 | 464 | 1280 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, medium mast | 3 | 472.6 | 129 | 343.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, ActiveBlock | 1 | 129 | 39 | 90 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, medium mast | 1 | 119 | 39 | 80 | 0 | — | — | |
| GS-MOUNT-RUB-75 Rubber mount 75mm, M16 | Hydraulic pack, ActiveBlock | 4 | 176 | 32 | 144 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, ActiveBlock | 4 | 635 | 179 | 456 | 0 | — | — | |
| HP-HITCH-QC Excavator quick coupler hitch | Digger Hitch base weldment | 1 | 18 | 3 | 15 | 0 | — | — | |
| HY-ACC-05 Accumulator 0.5L | Hydraulic pack, ActiveBlock | 1 | 47 | 8 | 39 | 0 | — | — | |
| HY-COOL-12V Oil cooler 12V, 8 plate | Hydraulic pack, ActiveBlock | 1 | 41 | 8 | 33 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, ActiveBlock | 1 | 141 | 39 | 102 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil ActiveBlock | 16 | 1872 | 610 | 1262 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, ActiveBlock | 6 | 586 | 172 | 414 | 2 | — | — | |
| HY-FIT-CBAL-08 Counterbalance valve 1/2 | Valve bank assembly, Walvoil ActiveBlock | 1 | 34 | 8 | 26 | 25 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, medium mast | 6 | 352 | 130 | 222 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, ActiveBlock | 3 | 651 | 194 | 457 | 1 | — | — | |
| HY-FIT-MANIF-4 Manifold block, 4 port | Hydraulic pack, ActiveBlock | 1 | 47 | 8 | 39 | 0 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, medium mast | 2 | 124 | 44 | 80 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil ActiveBlock | 1 | 131 | 39 | 92 | 0 | — | — | |
| HY-FIT-TEE-08 Tee 1/2 | Hose kit, medium mast | 2 | 104 | 42 | 62 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, medium mast | 4 | 436 | 152 | 284 | 0 | — | — | |
| HY-HOSE-08-800 Hose 2SN 08 dash, 800mm, crimped both ends | RSE Hydraulic Turner | 2 | 38 | 2 | 36 | 0 | — | — | |
| HY-HOSE-10-2000 Hose 2SN 10 dash, 2000mm, crimped both ends | Hose kit, medium mast | 2 | 104 | 42 | 62 | 0 | — | — | |
| HY-JOY-PROP Proportional joystick, ActiveBlock | Valve bank assembly, Walvoil ActiveBlock | 1 | 25 | 8 | 17 | 12 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, ActiveBlock | 30 | 4838 | 1184 | 3654 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, ActiveBlock | 1 | 141 | 39 | 102 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, medium mast | 1 | 166 | 55 | 111 | 1 | — | — | |
| HY-RAM-SIDE-50 Side shift ram 50 x 300 | Digger Hitch base weldment | 1 | 15 | 4 | 11 | 0 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, medium mast | 1 | 111 | 36 | 75 | 1 | — | — | |
| HY-RAM-TURN-40 RSE turner ram 40 x 200 | RSE Hydraulic Turner | 1 | 9 | 0 | 9 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, ActiveBlock | 1 | 141 | 39 | 102 | 0 | — | — | |
| HY-VB-WV-AB Walvoil ActiveBlock proportional module | Valve bank assembly, Walvoil ActiveBlock | 1 | 15 | 8 | 7 | 21 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 23 | 92 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 52 | 234 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | Digger Hitch base weldment | 2 | 282 | 58 | 224 | 2 | — | — | |
| MC-BUSH-50 Bush 50 ID, bronze | Mule-V mast weldment | 4 | 224 | 68 | 156 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Mule-V mast weldment | 6 | 548 | 190 | 358 | 1 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Mule-V mast weldment | 2 | 116 | 36 | 80 | 0 | — | — | |
| PL-INSERT-ADJ-25 Adjustable insert 25mm, threaded | Mule-V mast weldment | 8 | 464 | 160 | 304 | 0 | — | — | |
| PL-SLIDE-UHMW-M UHMW mast slide, medium, adjustable | Mule-V mast weldment | 4 | 192 | 68 | 124 | 1 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Mule-V mast weldment | 2 | 220 | 60 | 160 | 1 | — | — | |
| PT-2K-FPRED Two pack enamel, FencePro red | Machine, at blast and paint | 3.2 | 96.1 | 48 | 48.1 | 79.1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Mule-V mast weldment | 21 | 2755 | 651 | 2104 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Mule-V mast weldment | 4.1 | 498.2 | 115.5 | 382.7 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 28.9 | 131.2 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, medium mast | 4 | 598 | 194 | 404 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | Digger Hitch base weldment | 0.8 | 87.2 | 23.2 | 64 | 1 | — | — | |
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | Mule-V mast weldment | 5 | 0 | 85.8 | 0 | 720 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | Digger Hitch base weldment | 0.35 | 46 | 10.15 | 35.85 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | Digger Hitch base weldment | 0.25 | 30 | 7.25 | 22.75 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | Digger Hitch base weldment | 2.4 | 327.8 | 72.4 | 255.4 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 26 | 106 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 46 | 184 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 1.15 | 4.85 | 0 | — | — | |
| WR-DIGGER-HPIN Digger hitch pin set | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| WR-DIGGER-TLPIN Digger top link pin and clip | Digger Hitch base weldment | 1 | 12 | 3 | 9 | 0 | — | — | |
| WR-MULEV-PLATE Mule-V hammer wear plate set | Mule-V mast weldment | 1 | 11 | 4 | 7 | 0 | — | — | |
| WR-MULEV-ROPE Mule-V hoist rope, cut and swaged | Mule-V mast weldment | 1 | 11 | 4 | 7 | 0 | — | — |