Series 4 / PB650 On track Serialassigned at QC sign-off
MastKHS4
BasePB650
AttachmentsNone
Released4 Sep 2026
Final assembly29 Sep 2026
Promised to dealer6 Oct 2026
Convergence date
28 Sep 2026
Every sub-assembly is ready on or before 29 Sep 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Kinghitter Series 4 mast weldment
Not started, ready 28 Sep, needed 28 Sep
Onto the assembly bench 30 Sep 2026
Calculated completion 9 Oct 2026
Promised to dealer 6 Oct 2026
Production stages
Currently at stage 3 of 10 since 8 Sep 2026
- Released to production4 Sep
- Steel cut and prep7 Sep
- Fabrication and weld8 Sep
- Machining18 Sep
- Blast and paint21 Sep
- Hydraulic assembly23 Sep
- Final assembly29 Sep
- Test rig1 Oct
- QC sign-off2 Oct
- Ready for despatch5 Oct
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Kinghitter Series 4 mast weldment Mast weldment · 9 day build · SA-MW-KHS4 | Not started | — | 0 / 23.3 | 28 Sep | 28 Sep | Fits, with 0 days to spare |
| PB650 base weldment Base weldment · 5 day build · SA-BW-PB650 | Not started | — | 0 / 16.1 | 28 Sep | 28 Sep | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 28 Sep | 28 Sep | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 6-bank Valve bank · 1 day build · SA-VB-SD5-6 | Not started | — | 0 / 1.5 | 28 Sep | 28 Sep | Fits, with 0 days to spare |
| Ram set, large mast Ram set · 1 day build · SA-RS-L | Not started | — | 0 / 1.5 | 28 Sep | 28 Sep | Fits, with 0 days to spare |
| Hose kit, large mast Hose kit · 1 day build · SA-HK-L | Not started | — | 0 / 2 | 28 Sep | 28 Sep | Fits, with 0 days to spare |
| Decal and document set, KH Decal set · 1 day build · SA-DS-KH | Not started | — | 0 / 0.5 | 28 Sep | 28 Sep | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $13,568
- Labour at standard, complete
- $3,192
- Hours booked
- 0 / 69.4
- Sold for
- A$32,640
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
95 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-250 Rope sheave 250mm with bearing | Kinghitter Series 4 mast weldment | 2 | 84 | 20 | 64 | 28 | — | — | |
| BR-SLEW-650 Slew ring 650mm | PB650 base weldment | 1 | 10 | 4 | 6 | 6 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 8.4 | 49.6 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 36 | 170 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 63 | 361 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Kinghitter Series 4 mast weldment | 0.5 | 65 | 12.9 | 52.1 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 21 | 117 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Kinghitter Series 4 mast weldment | 7 | 983 | 199 | 784 | 1.1 | — | — | |
| DC-KH-S3 Kinghitter Series 3 decal set | Decal and document set, KH | 1 | 47 | 12 | 35 | 1 | — | — | |
| DC-MANUAL-KH Kinghitter operator manual and parts book | Decal and document set, KH | 1 | 47 | 12 | 35 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, KH | 1 | 150 | 39 | 111 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, KH | 1 | 150 | 39 | 111 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 2.7 | 13.3 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 21 | 111 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 4.2 | 19.8 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 21 | 105 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 18 | 85 | 0 | — | — | |
| FB-PB650-CARRIAGE PB650 shift carriage | PB650 base weldment | 1 | 15 | 4 | 11 | 0 | — | — | |
| FB-PB650-FRAME PB650 base frame weldment | PB650 base weldment | 1 | 15 | 4 | 11 | 0 | — | — | |
| FB-PB650-LINK PB650 linkage arm pair | PB650 base weldment | 1 | 15 | 4 | 11 | 0 | — | — | |
| FB-PB650-MOUNT PB650 mast mount bracket | PB650 base weldment | 1 | 15 | 4 | 11 | 0 | — | — | |
| FB-PB650-PINPL PB650 pin plate set 20mm | PB650 base weldment | 1 | 15 | 4 | 11 | 0 | — | — | |
| FB-PB650-STAB PB650 stabiliser foot | PB650 base weldment | 1 | 15 | 4 | 11 | 0 | — | — | |
| FB-ULTRAG2S-CARR Ultra G2S hammer carriage weldment | Kinghitter Series 4 mast weldment | 1 | 23 | 6 | 17 | 0 | — | — | |
| FB-ULTRAG2S-FOOT Ultra G2S mast foot plate 20mm | Kinghitter Series 4 mast weldment | 1 | 23 | 6 | 17 | 0 | — | — | |
| FB-ULTRAG2S-GUIDE Ultra G2S slide guide channel pair | Kinghitter Series 4 mast weldment | 1 | 23 | 6 | 17 | 0 | — | — | |
| FB-ULTRAG2S-HEAD Ultra G2S mast head weld assembly | Kinghitter Series 4 mast weldment | 1 | 23 | 6 | 17 | 0 | — | — | |
| FB-ULTRAG2S-LUG Ultra G2S lift lug set | Kinghitter Series 4 mast weldment | 2 | 46 | 12 | 34 | 0 | — | — | |
| FB-ULTRAG2S-ROPEG Ultra G2S rope guide bracket | Kinghitter Series 4 mast weldment | 2 | 46 | 12 | 34 | 0 | — | — | |
| FB-ULTRAG2S-STOP Ultra G2S carriage stop and buffer | Kinghitter Series 4 mast weldment | 2 | 46 | 12 | 34 | 0 | — | — | |
| FB-ULTRAG2S-TOP Ultra G2S mast top plate, laser cut 16mm | Kinghitter Series 4 mast weldment | 1 | 23 | 6 | 17 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 6-bank | 4 | 476 | 136 | 340 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 144 | 680 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Kinghitter Series 4 mast weldment | 12 | 1554 | 354 | 1200 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | PB650 base weldment | 8 | 920 | 192 | 728 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | PB650 base weldment | 1 | 109 | 24 | 85 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Kinghitter Series 4 mast weldment | 1 | 110 | 25 | 85 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 6-bank | 4 | 476 | 136 | 340 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 264 | 1432 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Kinghitter Series 4 mast weldment | 12 | 1964 | 384 | 1580 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | PB650 base weldment | 8 | 920 | 192 | 728 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 288 | 1360 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Kinghitter Series 4 mast weldment | 24 | 2640 | 600 | 2040 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | PB650 base weldment | 16 | 1744 | 384 | 1360 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, large mast | 3 | 472.6 | 114 | 358.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 34 | 95 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, large mast | 1 | 119 | 34 | 85 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 112 | 264 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 154 | 481 | 0 | — | — | |
| HY-CTRL-CABLE-4 Cable control assembly, 4 lever | Valve bank assembly, Walvoil SD5 6-bank | 1 | 28 | 11 | 17 | 20 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 34 | 107 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 6-bank | 18 | 1872 | 532 | 1340 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 148 | 438 | 2 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 8 | 651 | 170 | 481 | 1 | — | — | |
| HY-FIT-QR-12 Quick release coupler 3/4 | Hose kit, large mast | 2 | 144 | 38 | 106 | 2 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 6-bank | 1 | 131 | 34 | 97 | 0 | — | — | |
| HY-FIT-TEE-12 Tee 3/4 | Hose kit, large mast | 2 | 98 | 24 | 74 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 6-bank | 1 | 84 | 28 | 56 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 436 | 132 | 304 | 0 | — | — | |
| HY-HOSE-12-2400 Hose 2SN 12 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 210 | 50 | 160 | 0 | — | — | |
| HY-HOSE-12-3600 Hose 2SN 12 dash, 3600mm, crimped both ends | Hose kit, large mast | 2 | 100 | 36 | 64 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 1016 | 3822 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 34 | 107 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, large mast | 2 | 166 | 48 | 118 | 1 | — | — | |
| HY-RAM-ROT-63 Rotate ram 63 x 500, twin | PB650 base weldment | 1 | 16 | 8 | 8 | 14 | — | — | |
| HY-RAM-SIDE-63 Side shift ram 63 x 450 | PB650 base weldment | 1 | 38 | 11 | 27 | 0 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, large mast | 1 | 111 | 31 | 80 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 34 | 107 | 0 | — | — | |
| HY-VB-WV-SD5-6 Walvoil SD5 6-bank valve, cable control | Valve bank assembly, Walvoil SD5 6-bank | 1 | 28 | 11 | 17 | 9 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 18 | 97 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 42 | 244 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | PB650 base weldment | 2 | 282 | 48 | 234 | 2 | — | — | |
| MC-BUSH-50 Bush 50 ID, bronze | Kinghitter Series 4 mast weldment | 4 | 224 | 48 | 176 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Kinghitter Series 4 mast weldment | 6 | 548 | 160 | 388 | 1 | — | — | |
| PL-CAP-END-250 Beam end cap 250UB | Kinghitter Series 4 mast weldment | 2 | 104 | 20 | 84 | 0 | — | — | |
| PL-INSERT-ADJ-32 Adjustable insert 32mm, threaded | Kinghitter Series 4 mast weldment | 8 | 232 | 80 | 152 | 116 | — | — | |
| PL-SLIDE-UHMW-L UHMW mast slide, large, adjustable | Kinghitter Series 4 mast weldment | 4 | 88 | 40 | 48 | 82 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Kinghitter Series 4 mast weldment | 2 | 220 | 50 | 170 | 1 | — | — | |
| PT-2K-KHRED Two pack enamel, Kinghitter red | Machine, at blast and paint | 3.2 | 131.3 | 19.2 | 112.1 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Kinghitter Series 4 mast weldment | 21 | 2755 | 546 | 2209 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Kinghitter Series 4 mast weldment | 3.5 | 498.2 | 98 | 400.2 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 23.4 | 136.7 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, large mast | 6 | 598 | 170 | 428 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | PB650 base weldment | 0.8 | 87.2 | 19.2 | 68 | 1 | — | — | |
| ST-IB350-250UB Infrabuild 350 I-beam 250UB31, mill run | Kinghitter Series 4 mast weldment | 6 | 138.6 | 47.6 | 91 | 840 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | PB650 base weldment | 0.35 | 46 | 8.4 | 37.6 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | PB650 base weldment | 0.25 | 30 | 6 | 24 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | PB650 base weldment | 2.4 | 327.8 | 60.4 | 267.4 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 21 | 111 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 36 | 194 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 0.9 | 5.1 | 0 | — | — | |
| WR-PB650-HPIN PB650 hitch pin set | PB650 base weldment | 1 | 15 | 4 | 11 | 0 | — | — | |
| WR-PB650-TLPIN PB650 top link pin and clip | PB650 base weldment | 1 | 15 | 4 | 11 | 0 | — | — | |
| WR-ULTRAG2S-PLATE Ultra G2S hammer wear plate set | Kinghitter Series 4 mast weldment | 1 | 23 | 6 | 17 | 0 | — | — | |
| WR-ULTRAG2S-ROPE Ultra G2S hoist rope, cut and swaged | Kinghitter Series 4 mast weldment | 1 | 23 | 6 | 17 | 0 | — | — |