Ultra G2S / SM420 On track CustomerCanterbury Fencing Supplies Ltd
Serialassigned at QC sign-off
MastUltra G2S
BaseSidemount SM420
AttachmentsNone
Released21 Aug 2026
Final assembly17 Sep 2026
Promised to dealer15 Sep 2026
Convergence date
16 Sep 2026
Every sub-assembly is ready on or before 17 Sep 2026, the day final assembly is scheduled to start. This machine can be built on its date.
Critical path
Hydraulic pack, standard
Not started, ready 16 Sep, needed 16 Sep
Onto the assembly bench 17 Sep 2026
Calculated completion 25 Sep 2026
Promised to dealer 15 Sep 2026
Production stages
Currently at stage 4 of 10 since 7 Sep 2026
- Released to production21 Aug
- Steel cut and prep24 Aug
- Fabrication and weld25 Aug
- Machining7 Sep
- Blast and paint9 Sep
- Hydraulic assembly15 Sep
- Final assembly17 Sep
- Test rig22 Sep
- QC sign-off23 Sep
- Ready for despatch24 Sep
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Ultra G2S mast weldment Mast weldment · 8 day build · SA-MW-ULTRAG2S | On the bench | FAB · Pete Hoskins | 6.2 / 21 | 16 Sep | 15 Sep | Fits, with 1 day to spare |
| Sidemount SM420 base weldment Base weldment · 3 day build · SA-BW-SM420 | On the bench | FAB · Dave Kemsley | 4.7 / 9 | 16 Sep | 15 Sep | Fits, with 1 day to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 16 Sep | 16 Sep | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 4-bank Valve bank · 1 day build · SA-VB-SD5-4 | Not started | — | 0 / 1.2 | 16 Sep | 16 Sep | Fits, with 0 days to spare |
| Ram set, large mast Ram set · 1 day build · SA-RS-L | Not started | — | 0 / 1.5 | 16 Sep | 16 Sep | Fits, with 0 days to spare |
| Hose kit, large mast Hose kit · 1 day build · SA-HK-L | Not started | — | 0 / 2 | 16 Sep | 16 Sep | Fits, with 0 days to spare |
| Decal and document set, FP Decal set · 1 day build · SA-DS-FP | Not started | — | 0 / 0.5 | 16 Sep | 16 Sep | Fits, with 0 days to spare |
Value in this job
Standard cost
- Material issued to date
- $1,924
- Labour booked to date
- $501
- Work in progress
- $2,425
- Material at standard, complete
- $11,123
- Labour at standard, complete
- $2,746
- Hours booked
- 10.9 / 59.7
- Sold for
- $22,350
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
93 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| BR-SHEAVE-250 Rope sheave 250mm with bearing | Ultra G2S mast weldment | 2 | 84 | 2 | 82 | 28 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 1.2 | 56.8 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 4 | 202 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 9 | 415 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Ultra G2S mast weldment | 0.5 | 65 | 4.2 | 60.8 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 3 | 135 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Ultra G2S mast weldment | 7 | 983 | 65 | 918 | 1.1 | — | — | |
| DC-FP-ULTRAG4 FencePro Ultra G4 decal set | Decal and document set, FP | 1 | 42 | 11 | 31 | 35 | — | — | |
| DC-MANUAL-FP FencePro operator manual and parts book | Decal and document set, FP | 1 | 72 | 11 | 61 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, FP | 1 | 150 | 21 | 129 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, FP | 1 | 150 | 21 | 129 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 0.3 | 15.7 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 3 | 129 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 0.6 | 23.4 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 3 | 123 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 2 | 101 | 0 | — | — | |
| FB-SM420-CARRIAGE SM420 shift carriage | Sidemount SM420 base weldment | 1 | 3 | 0 | 3 | 0 | — | — | |
| FB-SM420-FRAME SM420 base frame weldment | Sidemount SM420 base weldment | 1 | 3 | 0 | 3 | 0 | — | — | |
| FB-SM420-LINK SM420 linkage arm pair | Sidemount SM420 base weldment | 1 | 3 | 0 | 3 | 0 | — | — | |
| FB-SM420-MOUNT SM420 mast mount bracket | Sidemount SM420 base weldment | 1 | 3 | 0 | 3 | 0 | — | — | |
| FB-SM420-PINPL SM420 pin plate set 20mm | Sidemount SM420 base weldment | 1 | 3 | 0 | 3 | 0 | — | — | |
| FB-SM420-STAB SM420 stabiliser foot | Sidemount SM420 base weldment | 1 | 3 | 0 | 3 | 0 | — | — | |
| FB-ULTRAG2S-CARR Ultra G2S hammer carriage weldment | Ultra G2S mast weldment | 1 | 23 | 1 | 22 | 0 | — | — | |
| FB-ULTRAG2S-FOOT Ultra G2S mast foot plate 20mm | Ultra G2S mast weldment | 1 | 23 | 1 | 22 | 0 | — | — | |
| FB-ULTRAG2S-GUIDE Ultra G2S slide guide channel pair | Ultra G2S mast weldment | 1 | 23 | 1 | 22 | 0 | — | — | |
| FB-ULTRAG2S-HEAD Ultra G2S mast head weld assembly | Ultra G2S mast weldment | 1 | 23 | 1 | 22 | 0 | — | — | |
| FB-ULTRAG2S-LUG Ultra G2S lift lug set | Ultra G2S mast weldment | 2 | 46 | 2 | 44 | 0 | — | — | |
| FB-ULTRAG2S-ROPEG Ultra G2S rope guide bracket | Ultra G2S mast weldment | 2 | 46 | 2 | 44 | 0 | — | — | |
| FB-ULTRAG2S-STOP Ultra G2S carriage stop and buffer | Ultra G2S mast weldment | 2 | 46 | 2 | 44 | 0 | — | — | |
| FB-ULTRAG2S-TOP Ultra G2S mast top plate, laser cut 16mm | Ultra G2S mast weldment | 1 | 23 | 1 | 22 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 72 | 404 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 16 | 808 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Ultra G2S mast weldment | 12 | 1554 | 114 | 1440 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | Sidemount SM420 base weldment | 8 | 920 | 64 | 856 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | Sidemount SM420 base weldment | 1 | 109 | 8 | 101 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Ultra G2S mast weldment | 1 | 110 | 8 | 102 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 72 | 404 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 56 | 1640 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Ultra G2S mast weldment | 12 | 1964 | 124 | 1840 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | Sidemount SM420 base weldment | 8 | 920 | 64 | 856 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 32 | 1616 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Ultra G2S mast weldment | 24 | 2640 | 192 | 2448 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | Sidemount SM420 base weldment | 16 | 1744 | 128 | 1616 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, large mast | 3 | 472.6 | 58 | 414.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 18 | 111 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, large mast | 1 | 119 | 18 | 101 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 56 | 320 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 74 | 561 | 0 | — | — | |
| HY-CTRL-CABLE-3 Cable control assembly, 3 lever | Valve bank assembly, Walvoil SD5 4-bank | 1 | 50 | 8 | 42 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 18 | 123 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 4-bank | 14 | 1872 | 284 | 1588 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 80 | 506 | 2 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 8 | 651 | 78 | 573 | 1 | — | — | |
| HY-FIT-QR-12 Quick release coupler 3/4 | Hose kit, large mast | 2 | 144 | 16 | 128 | 2 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 4-bank | 1 | 131 | 18 | 113 | 0 | — | — | |
| HY-FIT-TEE-12 Tee 3/4 | Hose kit, large mast | 2 | 98 | 10 | 88 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 4-bank | 1 | 84 | 14 | 70 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 436 | 72 | 364 | 0 | — | — | |
| HY-HOSE-12-2400 Hose 2SN 12 dash, 2400mm, crimped both ends | Hose kit, large mast | 4 | 210 | 22 | 188 | 0 | — | — | |
| HY-HOSE-12-3600 Hose 2SN 12 dash, 3600mm, crimped both ends | Hose kit, large mast | 2 | 100 | 14 | 86 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 496 | 4342 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 18 | 123 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, large mast | 2 | 166 | 24 | 142 | 1 | — | — | |
| HY-RAM-SIDE-50 Side shift ram 50 x 300 | Sidemount SM420 base weldment | 1 | 15 | 1 | 14 | 0 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, large mast | 1 | 111 | 17 | 94 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 18 | 123 | 0 | — | — | |
| HY-VB-WV-SD5-4 Walvoil SD5 4-bank valve, cable control | Valve bank assembly, Walvoil SD5 4-bank | 1 | 45 | 8 | 37 | 24 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 2 | 113 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 6 | 280 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | Sidemount SM420 base weldment | 2 | 282 | 16 | 266 | 2 | — | — | |
| MC-BUSH-50 Bush 50 ID, bronze | Ultra G2S mast weldment | 4 | 224 | 16 | 208 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Ultra G2S mast weldment | 6 | 548 | 82 | 466 | 1 | — | — | |
| PL-CAP-END-250 Beam end cap 250UB | Ultra G2S mast weldment | 2 | 104 | 2 | 102 | 0 | — | — | |
| PL-INSERT-ADJ-32 Adjustable insert 32mm, threaded | Ultra G2S mast weldment | 8 | 232 | 8 | 224 | 116 | — | — | |
| PL-SLIDE-UHMW-L UHMW mast slide, large, adjustable | Ultra G2S mast weldment | 4 | 88 | 4 | 84 | 82 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Ultra G2S mast weldment | 2 | 220 | 16 | 204 | 1 | — | — | |
| PT-2K-FPRED Two pack enamel, FencePro red | Machine, at blast and paint | 3.2 | 96.1 | 3.2 | 92.9 | 79.1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Ultra G2S mast weldment | 21 | 2755 | 178 | 2577 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Ultra G2S mast weldment | 3.5 | 498.2 | 32 | 466.2 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 3.4 | 156.7 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, large mast | 6 | 598 | 84 | 514 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | Sidemount SM420 base weldment | 0.8 | 87.2 | 6.4 | 80.8 | 1 | — | — | |
| ST-IB350-250UB Infrabuild 350 I-beam 250UB31, mill run | Ultra G2S mast weldment | 5.8 | 138.6 | 6 | 132.6 | 840 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | Sidemount SM420 base weldment | 0.35 | 46 | 2.8 | 43.2 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | Sidemount SM420 base weldment | 0.25 | 30 | 2 | 28 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | Sidemount SM420 base weldment | 2.4 | 327.8 | 22 | 305.8 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 3 | 129 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 4 | 226 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 0.1 | 5.9 | 0 | — | — | |
| WR-SM420-HPIN SM420 hitch pin set | Sidemount SM420 base weldment | 1 | 3 | 0 | 3 | 0 | — | — | |
| WR-SM420-TLPIN SM420 top link pin and clip | Sidemount SM420 base weldment | 1 | 3 | 0 | 3 | 0 | — | — | |
| WR-ULTRAG2S-PLATE Ultra G2S hammer wear plate set | Ultra G2S mast weldment | 1 | 23 | 1 | 22 | 0 | — | — | |
| WR-ULTRAG2S-ROPE Ultra G2S hoist rope, cut and swaged | Ultra G2S mast weldment | 1 | 23 | 1 | 22 | 0 | — | — |