Mule / UltraGlide At risk CustomerTe Kuiti Fencing Supplies Ltd
Serialassigned at QC sign-off
MastMule
BaseUltraGlide RS
AttachmentsNone
Released26 Aug 2026
Final assembly17 Sep 2026
Promised to dealer16 Sep 2026
Convergence date
22 Sep 2026
The last sub-assembly is not ready until 22 Sep 2026, which is 3 working days after final assembly is scheduled to start on 17 Sep 2026. This machine cannot be built on its date.
Critical path
Mule mast weldment
Not started, ready 22 Sep, needed 16 Sep
Onto the assembly bench 23 Sep 2026
Calculated completion 30 Sep 2026
Promised to dealer 16 Sep 2026
Production stages
Currently at stage 3 of 10 since 28 Aug 2026
- Released to production26 Aug
- Steel cut and prep27 Aug
- Fabrication and weld28 Aug
- Machining9 Sep
- Blast and paint11 Sep
- Hydraulic assembly15 Sep
- Final assembly17 Sep
- Test rig21 Sep
- QC sign-off23 Sep
- Ready for despatch24 Sep
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Mule mast weldment Mast weldment · 6 day build · SA-MW-MULE | Not started | — | 0 / 17.7 | 16 Sep | 22 Sep | 4 days late. Waiting on ST-IB350-200UB to land 15 Sep. |
| UltraGlide RS base weldment Base weldment · 5 day build · SA-BW-UGRS | Not started | — | 0 / 16.3 | 16 Sep | 16 Sep | Fits, with 0 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 16 Sep | 16 Sep | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 4-bank Valve bank · 1 day build · SA-VB-SD5-4 | Not started | — | 0 / 1.2 | 16 Sep | 16 Sep | Fits, with 0 days to spare |
| Ram set, medium mast Ram set · 1 day build · SA-RS-M | Not started | — | 0 / 1.2 | 16 Sep | 16 Sep | Fits, with 0 days to spare |
| Hose kit, medium mast Hose kit · 1 day build · SA-HK-M | Not started | — | 0 / 1.5 | 16 Sep | 16 Sep | Fits, with 0 days to spare |
| Decal and document set, FP Decal set · 1 day build · SA-DS-FP | Not started | — | 0 / 0.5 | 16 Sep | 16 Sep | Fits, with 0 days to spare |
1 shortage against this machine
| Item | Short | Cover | |
|---|---|---|---|
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | 5 | 15 Sep |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $10,955
- Labour at standard, complete
- $2,893
- Hours booked
- 0 / 62.9
- Sold for
- $23,600
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Released to production on 26 Aug 2026 against SO-26-1204. No correspondence is threaded to this machine.
Component requirements
StockNetting
95 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | Mule mast weldment | 5 | 0 | 35 | 0 | 720 | 15 Sep | 5 | |
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Mule mast weldment | 2 | 116 | 14 | 102 | 0 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 1.2 | 56.8 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 4 | 202 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 9 | 415 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Mule mast weldment | 0.5 | 65 | 4.2 | 60.8 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 3 | 135 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Mule mast weldment | 7 | 983 | 65 | 918 | 1.1 | — | — | |
| DC-FP-ULTRAG4 FencePro Ultra G4 decal set | Decal and document set, FP | 1 | 42 | 11 | 31 | 35 | — | — | |
| DC-MANUAL-FP FencePro operator manual and parts book | Decal and document set, FP | 1 | 72 | 11 | 61 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, FP | 1 | 150 | 21 | 129 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, FP | 1 | 150 | 21 | 129 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 0.3 | 15.7 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 3 | 129 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 0.6 | 23.4 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 3 | 123 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 2 | 101 | 0 | — | — | |
| FB-MULE-CARR Mule hammer carriage weldment | Mule mast weldment | 1 | 37 | 6 | 31 | 0 | — | — | |
| FB-MULE-FOOT Mule mast foot plate 20mm | Mule mast weldment | 1 | 37 | 6 | 31 | 0 | — | — | |
| FB-MULE-GUIDE Mule slide guide channel pair | Mule mast weldment | 1 | 37 | 6 | 31 | 0 | — | — | |
| FB-MULE-HEAD Mule mast head weld assembly | Mule mast weldment | 1 | 37 | 6 | 31 | 0 | — | — | |
| FB-MULE-LUG Mule lift lug set | Mule mast weldment | 2 | 74 | 12 | 62 | 0 | — | — | |
| FB-MULE-ROPEG Mule rope guide bracket | Mule mast weldment | 2 | 74 | 12 | 62 | 0 | — | — | |
| FB-MULE-STOP Mule carriage stop and buffer | Mule mast weldment | 2 | 74 | 12 | 62 | 0 | — | — | |
| FB-MULE-TOP Mule mast top plate, laser cut 16mm | Mule mast weldment | 1 | 37 | 6 | 31 | 0 | — | — | |
| FB-UGRS-CARRIAGE UltraGlide shift carriage | UltraGlide RS base weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| FB-UGRS-FRAME UltraGlide base frame weldment | UltraGlide RS base weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| FB-UGRS-LINK UltraGlide linkage arm pair | UltraGlide RS base weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| FB-UGRS-MOUNT UltraGlide mast mount bracket | UltraGlide RS base weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| FB-UGRS-PINPL UltraGlide pin plate set 20mm | UltraGlide RS base weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| FB-UGRS-STAB UltraGlide stabiliser foot | UltraGlide RS base weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 72 | 404 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 16 | 808 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Mule mast weldment | 12 | 1554 | 114 | 1440 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | UltraGlide RS base weldment | 8 | 920 | 64 | 856 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | UltraGlide RS base weldment | 1 | 109 | 8 | 101 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Mule mast weldment | 1 | 110 | 8 | 102 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 72 | 404 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Machine, at blast and paint | 8 | 1696 | 56 | 1640 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Mule mast weldment | 12 | 1964 | 124 | 1840 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | UltraGlide RS base weldment | 8 | 920 | 64 | 856 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 32 | 1616 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Mule mast weldment | 24 | 2640 | 192 | 2448 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | UltraGlide RS base weldment | 16 | 1744 | 128 | 1616 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, medium mast | 3 | 472.6 | 58 | 414.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 18 | 111 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, medium mast | 1 | 119 | 18 | 101 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 56 | 320 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 74 | 561 | 0 | — | — | |
| HY-CTRL-CABLE-3 Cable control assembly, 3 lever | Valve bank assembly, Walvoil SD5 4-bank | 1 | 50 | 8 | 42 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 18 | 123 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 4-bank | 14 | 1872 | 284 | 1588 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 80 | 506 | 2 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, medium mast | 6 | 352 | 72 | 280 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 2 | 651 | 78 | 573 | 1 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, medium mast | 2 | 124 | 24 | 100 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 4-bank | 1 | 131 | 18 | 113 | 0 | — | — | |
| HY-FIT-TEE-08 Tee 1/2 | Hose kit, medium mast | 2 | 104 | 24 | 80 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 4-bank | 1 | 84 | 14 | 70 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, medium mast | 4 | 436 | 72 | 364 | 0 | — | — | |
| HY-HOSE-10-2000 Hose 2SN 10 dash, 2000mm, crimped both ends | Hose kit, medium mast | 2 | 104 | 24 | 80 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 496 | 4342 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 18 | 123 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, medium mast | 1 | 166 | 24 | 142 | 1 | — | — | |
| HY-RAM-SIDE-75 Side shift ram 75 x 900 | UltraGlide RS base weldment | 1 | 25 | 4 | 21 | 20 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, medium mast | 1 | 111 | 17 | 94 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 18 | 123 | 0 | — | — | |
| HY-VB-WV-SD5-4 Walvoil SD5 4-bank valve, cable control | Valve bank assembly, Walvoil SD5 4-bank | 1 | 45 | 8 | 37 | 24 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 2 | 113 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 6 | 280 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | UltraGlide RS base weldment | 2 | 282 | 16 | 266 | 2 | — | — | |
| MC-BUSH-40 Bush 40 ID, bronze | Mule mast weldment | 4 | 164 | 24 | 140 | 0 | — | — | |
| MC-PIN-40x220 Pin 40 x 220, hardened | Mule mast weldment | 2 | 318 | 16 | 302 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Ram set, medium mast | 4 | 548 | 82 | 466 | 1 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Mule mast weldment | 2 | 116 | 14 | 102 | 0 | — | — | |
| PL-INSERT-ADJ-25 Adjustable insert 25mm, threaded | Mule mast weldment | 16 | 464 | 64 | 400 | 0 | — | — | |
| PL-SLIDE-UGRS UltraGlide rail slide pad | UltraGlide RS base weldment | 6 | 60 | 6 | 54 | 0 | — | — | |
| PL-SLIDE-UHMW-M UHMW mast slide, medium, adjustable | Mule mast weldment | 4 | 192 | 28 | 164 | 1 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Mule mast weldment | 2 | 220 | 16 | 204 | 1 | — | — | |
| PT-2K-FPRED Two pack enamel, FencePro red | Machine, at blast and paint | 3.2 | 96.1 | 3.2 | 92.9 | 79.1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Mule mast weldment | 21 | 2755 | 178 | 2577 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Mule mast weldment | 3.5 | 498.2 | 32 | 466.2 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 3.4 | 156.7 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, medium mast | 4 | 598 | 84 | 514 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | UltraGlide RS base weldment | 0.8 | 87.2 | 6.4 | 80.8 | 1 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | UltraGlide RS base weldment | 0.35 | 46 | 2.8 | 43.2 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | UltraGlide RS base weldment | 0.25 | 30 | 2 | 28 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | UltraGlide RS base weldment | 2.4 | 327.8 | 22 | 305.8 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 3 | 129 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 4 | 226 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 0.1 | 5.9 | 0 | — | — | |
| WR-MULE-PLATE Mule hammer wear plate set | Mule mast weldment | 1 | 37 | 6 | 31 | 0 | — | — | |
| WR-MULE-ROPE Mule hoist rope, cut and swaged | Mule mast weldment | 1 | 37 | 6 | 31 | 0 | — | — | |
| WR-UGRS-HPIN UltraGlide hitch pin set | UltraGlide RS base weldment | 1 | 10 | 1 | 9 | 0 | — | — | |
| WR-UGRS-TLPIN UltraGlide top link pin and clip | UltraGlide RS base weldment | 1 | 10 | 1 | 9 | 0 | — | — |