Mule-V / MS350 At risk Serialassigned at QC sign-off
MastMule-V
BaseMS350 Mastshift
AttachmentsNone
Released19 Aug 2026
Final assembly16 Sep 2026
Promised to dealer17 Sep 2026
Convergence date
17 Sep 2026
The last sub-assembly is not ready until 17 Sep 2026, which is 1 working day after final assembly is scheduled to start on 16 Sep 2026. This machine cannot be built on its date.
Critical path
Mule-V mast weldment
On the bench, ready 17 Sep, needed 15 Sep
Onto the assembly bench 18 Sep 2026
Calculated completion 28 Sep 2026
Promised to dealer 17 Sep 2026
Production stages
Currently at stage 5 of 10 since 7 Sep 2026
- Released to production19 Aug
- Steel cut and prep20 Aug
- Fabrication and weld21 Aug
- Machining3 Sep
- Blast and paint7 Sep
- Hydraulic assembly10 Sep
- Final assembly16 Sep
- Test rig18 Sep
- QC sign-off21 Sep
- Ready for despatch22 Sep
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Mule-V mast weldment Mast weldment · 8 day build · SA-MW-MULEV | On the bench | FAB · Karl Meurant | 15.2 / 21.2 | 15 Sep | 17 Sep | 2 days late. Waiting on ST-IB350-200UB to land 15 Sep. |
| MS350 Mastshift base weldment Base weldment · 4 day build · SA-BW-MS350 | On the bench | FAB · Wiremu Rangi | 6.4 / 12.3 | 15 Sep | 11 Sep | Fits, with 2 days to spare |
| Hydraulic pack, ActiveBlock Hydraulic pack · 2 day build · SA-HP-AB | On the bench | HYD · Ben Ngatai | 0.9 / 3 | 15 Sep | 15 Sep | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil ActiveBlock Valve bank · 1 day build · SA-VB-AB | On the bench | HYD · Ben Ngatai | 1.1 / 2 | 15 Sep | 15 Sep | Fits, with 0 days to spare |
| Ram set, medium mast Ram set · 1 day build · SA-RS-M | On the bench | HYD · Toby Elliott | 0.4 / 1.2 | 15 Sep | 15 Sep | Fits, with 0 days to spare |
| Hose kit, medium mast Hose kit · 1 day build · SA-HK-M | On the bench | HYD · Shaun Corry | 0.4 / 1.5 | 15 Sep | 15 Sep | Fits, with 0 days to spare |
| Decal and document set, FP Decal set · 1 day build · SA-DS-FP | Not started | — | 0 / 0.5 | 15 Sep | 15 Sep | Fits, with 0 days to spare |
1 shortage against this machine
| Item | Short | Cover | |
|---|---|---|---|
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | 5 | 15 Sep |
Value in this job
Standard cost
- Material issued to date
- $6,411
- Labour booked to date
- $1,122
- Work in progress
- $7,533
- Material at standard, complete
- $11,766
- Labour at standard, complete
- $2,930
- Hours booked
- 24.4 / 63.7
- Sold for
- A$22,725
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
79 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | Mule-V mast weldment | 5 | 0 | 25 | 0 | 720 | 15 Sep | 5 | |
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Mule-V mast weldment | 2 | 116 | 10 | 106 | 0 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Mule-V mast weldment | 0.5 | 65 | 2.5 | 62.5 | 2 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Mule-V mast weldment | 7 | 983 | 36.5 | 946.5 | 1.1 | — | — | |
| DC-FP-ULTRAG4 FencePro Ultra G4 decal set | Decal and document set, FP | 1 | 42 | 9 | 33 | 35 | — | — | |
| DC-MANUAL-FP FencePro operator manual and parts book | Decal and document set, FP | 1 | 72 | 9 | 63 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, FP | 1 | 150 | 17 | 133 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, FP | 1 | 150 | 17 | 133 | 1 | — | — | |
| EL-LOOM-PROP Wiring loom, proportional control | Valve bank assembly, Walvoil ActiveBlock | 1 | 19 | 3 | 16 | 19 | — | — | |
| FB-MS350-CARRIAGE MS350 shift carriage | MS350 Mastshift base weldment | 1 | 8 | 0 | 8 | 0 | — | — | |
| FB-MS350-FRAME MS350 base frame weldment | MS350 Mastshift base weldment | 1 | 8 | 0 | 8 | 0 | — | — | |
| FB-MS350-LINK MS350 linkage arm pair | MS350 Mastshift base weldment | 1 | 8 | 0 | 8 | 0 | — | — | |
| FB-MS350-MOUNT MS350 mast mount bracket | MS350 Mastshift base weldment | 1 | 8 | 0 | 8 | 0 | — | — | |
| FB-MS350-PINPL MS350 pin plate set 20mm | MS350 Mastshift base weldment | 1 | 8 | 0 | 8 | 0 | — | — | |
| FB-MS350-STAB MS350 stabiliser foot | MS350 Mastshift base weldment | 1 | 8 | 0 | 8 | 0 | — | — | |
| FB-MULEV-CARR Mule-V hammer carriage weldment | Mule-V mast weldment | 1 | 11 | 0 | 11 | 0 | — | — | |
| FB-MULEV-FOOT Mule-V mast foot plate 20mm | Mule-V mast weldment | 1 | 11 | 0 | 11 | 0 | — | — | |
| FB-MULEV-GUIDE Mule-V slide guide channel pair | Mule-V mast weldment | 1 | 11 | 0 | 11 | 0 | — | — | |
| FB-MULEV-HEAD Mule-V mast head weld assembly | Mule-V mast weldment | 1 | 11 | 0 | 11 | 0 | — | — | |
| FB-MULEV-LUG Mule-V lift lug set | Mule-V mast weldment | 2 | 22 | 0 | 22 | 0 | — | — | |
| FB-MULEV-ROPEG Mule-V rope guide bracket | Mule-V mast weldment | 2 | 22 | 0 | 22 | 0 | — | — | |
| FB-MULEV-STOP Mule-V carriage stop and buffer | Mule-V mast weldment | 2 | 22 | 0 | 22 | 0 | — | — | |
| FB-MULEV-TOP Mule-V mast top plate, laser cut 16mm | Mule-V mast weldment | 1 | 11 | 0 | 11 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil ActiveBlock | 4 | 476 | 60 | 416 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Mule-V mast weldment | 12 | 1554 | 60 | 1494 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | MS350 Mastshift base weldment | 8 | 920 | 40 | 880 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | MS350 Mastshift base weldment | 1 | 109 | 5 | 104 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Mule-V mast weldment | 1 | 110 | 5 | 105 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil ActiveBlock | 4 | 476 | 60 | 416 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Mule-V mast weldment | 12 | 1964 | 60 | 1904 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | MS350 Mastshift base weldment | 8 | 920 | 40 | 880 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Mule-V mast weldment | 24 | 2640 | 120 | 2520 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | MS350 Mastshift base weldment | 16 | 1744 | 80 | 1664 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, medium mast | 3 | 472.6 | 45 | 427.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, ActiveBlock | 1 | 129 | 15 | 114 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, medium mast | 1 | 119 | 15 | 104 | 0 | — | — | |
| GS-MOUNT-RUB-75 Rubber mount 75mm, M16 | Hydraulic pack, ActiveBlock | 4 | 176 | 12 | 164 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, ActiveBlock | 4 | 635 | 62 | 573 | 0 | — | — | |
| HY-ACC-05 Accumulator 0.5L | Hydraulic pack, ActiveBlock | 1 | 47 | 3 | 44 | 0 | — | — | |
| HY-COOL-12V Oil cooler 12V, 8 plate | Hydraulic pack, ActiveBlock | 1 | 41 | 3 | 38 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, ActiveBlock | 1 | 141 | 15 | 126 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil ActiveBlock | 16 | 1872 | 232 | 1640 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, ActiveBlock | 6 | 586 | 66 | 520 | 2 | — | — | |
| HY-FIT-CBAL-08 Counterbalance valve 1/2 | Valve bank assembly, Walvoil ActiveBlock | 1 | 34 | 3 | 31 | 25 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, medium mast | 6 | 352 | 60 | 292 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, ActiveBlock | 3 | 651 | 65 | 586 | 1 | — | — | |
| HY-FIT-MANIF-4 Manifold block, 4 port | Hydraulic pack, ActiveBlock | 1 | 47 | 3 | 44 | 0 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, medium mast | 2 | 124 | 20 | 104 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil ActiveBlock | 1 | 131 | 15 | 116 | 0 | — | — | |
| HY-FIT-TEE-08 Tee 1/2 | Hose kit, medium mast | 2 | 104 | 20 | 84 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, medium mast | 4 | 436 | 60 | 376 | 0 | — | — | |
| HY-HOSE-10-2000 Hose 2SN 10 dash, 2000mm, crimped both ends | Hose kit, medium mast | 2 | 104 | 20 | 84 | 0 | — | — | |
| HY-JOY-PROP Proportional joystick, ActiveBlock | Valve bank assembly, Walvoil ActiveBlock | 1 | 25 | 3 | 22 | 12 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, ActiveBlock | 30 | 4838 | 414 | 4424 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, ActiveBlock | 1 | 141 | 15 | 126 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, medium mast | 1 | 166 | 20 | 146 | 1 | — | — | |
| HY-RAM-SIDE-63 Side shift ram 63 x 450 | MS350 Mastshift base weldment | 1 | 38 | 1 | 37 | 0 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, medium mast | 1 | 111 | 14 | 97 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, ActiveBlock | 1 | 141 | 15 | 126 | 0 | — | — | |
| HY-VB-WV-AB Walvoil ActiveBlock proportional module | Valve bank assembly, Walvoil ActiveBlock | 1 | 15 | 3 | 12 | 21 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | MS350 Mastshift base weldment | 2 | 282 | 10 | 272 | 2 | — | — | |
| MC-BUSH-50 Bush 50 ID, bronze | Mule-V mast weldment | 4 | 224 | 0 | 224 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Mule-V mast weldment | 6 | 548 | 58 | 490 | 1 | — | — | |
| MC-SPACER-SET Spacer set, mast carriage | MS350 Mastshift base weldment | 1 | 8 | 0 | 8 | 0 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Mule-V mast weldment | 2 | 116 | 10 | 106 | 0 | — | — | |
| PL-INSERT-ADJ-25 Adjustable insert 25mm, threaded | Mule-V mast weldment | 8 | 464 | 48 | 416 | 0 | — | — | |
| PL-SLIDE-UHMW-M UHMW mast slide, medium, adjustable | Mule-V mast weldment | 4 | 192 | 20 | 172 | 1 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Mule-V mast weldment | 2 | 220 | 10 | 210 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Mule-V mast weldment | 21 | 2755 | 105 | 2650 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Mule-V mast weldment | 3.5 | 498.2 | 18.1 | 480.1 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, medium mast | 4 | 598 | 70 | 528 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | MS350 Mastshift base weldment | 0.8 | 87.2 | 4 | 83.2 | 1 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | MS350 Mastshift base weldment | 0.35 | 46 | 1.75 | 44.25 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | MS350 Mastshift base weldment | 0.25 | 30 | 1.25 | 28.75 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | MS350 Mastshift base weldment | 2.4 | 327.8 | 12 | 315.8 | 1 | — | — | |
| WR-MS350-HPIN MS350 hitch pin set | MS350 Mastshift base weldment | 1 | 8 | 0 | 8 | 0 | — | — | |
| WR-MS350-TLPIN MS350 top link pin and clip | MS350 Mastshift base weldment | 1 | 8 | 0 | 8 | 0 | — | — | |
| WR-MULEV-PLATE Mule-V hammer wear plate set | Mule-V mast weldment | 1 | 11 | 0 | 11 | 0 | — | — | |
| WR-MULEV-ROPE Mule-V hoist rope, cut and swaged | Mule-V mast weldment | 1 | 11 | 0 | 11 | 0 | — | — |