Mule / SM1000 At risk CustomerWaikato Fencing Systems Ltd
Serialassigned at QC sign-off
MastMule
BaseSidemount SM1000
AttachmentsNone
Released17 Aug 2026
Final assembly15 Sep 2026
Promised to dealer22 Sep 2026
Convergence date
18 Sep 2026
The last sub-assembly is not ready until 18 Sep 2026, which is 3 working days after final assembly is scheduled to start on 15 Sep 2026. This machine cannot be built on its date.
Critical path
Mule mast weldment
On the bench, ready 18 Sep, needed 14 Sep
Onto the assembly bench 21 Sep 2026
Calculated completion 29 Sep 2026
Promised to dealer 22 Sep 2026
Production stages
Currently at stage 5 of 10 since 3 Sep 2026
- Released to production17 Aug
- Steel cut and prep18 Aug
- Fabrication and weld19 Aug
- Machining31 Aug
- Blast and paint3 Sep
- Hydraulic assembly9 Sep
- Final assembly15 Sep
- Test rig17 Sep
- QC sign-off18 Sep
- Ready for despatch21 Sep
Sub-assemblies
Platform
0 of 7 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Mule mast weldment Mast weldment · 6 day build · SA-MW-MULE | On the bench | FAB · Wiremu Rangi | 6.8 / 17.7 | 14 Sep | 18 Sep | 4 days late. Waiting on ST-IB350-200UB to land 15 Sep. |
| Sidemount SM1000 base weldment Base weldment · 4 day build · SA-BW-SM1000 | On the bench | FAB · Dave Kemsley | 9.5 / 13.4 | 14 Sep | 10 Sep | Fits, with 2 days to spare |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | On the bench | HYD · Ben Ngatai | 0.9 / 2.5 | 14 Sep | 14 Sep | Fits, with 0 days to spare |
| Valve bank assembly, Walvoil SD5 4-bank Valve bank · 1 day build · SA-VB-SD5-4 | On the bench | HYD · Toby Elliott | 0.8 / 1.2 | 14 Sep | 14 Sep | Fits, with 0 days to spare |
| Ram set, medium mast Ram set · 1 day build · SA-RS-M | On the bench | HYD · Shaun Corry | 0.6 / 1.2 | 14 Sep | 14 Sep | Fits, with 0 days to spare |
| Hose kit, medium mast Hose kit · 1 day build · SA-HK-M | On the bench | HYD · Rachel Doull | 0.7 / 1.5 | 14 Sep | 14 Sep | Fits, with 0 days to spare |
| Decal and document set, FP Decal set · 1 day build · SA-DS-FP | Not started | — | 0 / 0.5 | 14 Sep | 14 Sep | Fits, with 0 days to spare |
1 shortage against this machine
| Item | Short | Cover | |
|---|---|---|---|
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | 5 | 15 Sep |
Value in this job
Standard cost
- Material issued to date
- $5,843
- Labour booked to date
- $888
- Work in progress
- $6,731
- Material at standard, complete
- $10,347
- Labour at standard, complete
- $2,760
- Hours booked
- 19.3 / 60
- Sold for
- $19,200
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
76 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | Mule mast weldment | 5 | 0 | 10 | 0 | 720 | 15 Sep | 5 | |
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Mule mast weldment | 2 | 116 | 4 | 112 | 0 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Mule mast weldment | 0.5 | 65 | 1 | 64 | 2 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Mule mast weldment | 7 | 983 | 15.5 | 967.5 | 1.1 | — | — | |
| DC-FP-ULTRAG4 FencePro Ultra G4 decal set | Decal and document set, FP | 1 | 42 | 7 | 35 | 35 | — | — | |
| DC-MANUAL-FP FencePro operator manual and parts book | Decal and document set, FP | 1 | 72 | 7 | 65 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, FP | 1 | 150 | 14 | 136 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, FP | 1 | 150 | 14 | 136 | 1 | — | — | |
| FB-MULE-CARR Mule hammer carriage weldment | Mule mast weldment | 1 | 37 | 2 | 35 | 0 | — | — | |
| FB-MULE-FOOT Mule mast foot plate 20mm | Mule mast weldment | 1 | 37 | 2 | 35 | 0 | — | — | |
| FB-MULE-GUIDE Mule slide guide channel pair | Mule mast weldment | 1 | 37 | 2 | 35 | 0 | — | — | |
| FB-MULE-HEAD Mule mast head weld assembly | Mule mast weldment | 1 | 37 | 2 | 35 | 0 | — | — | |
| FB-MULE-LUG Mule lift lug set | Mule mast weldment | 2 | 74 | 4 | 70 | 0 | — | — | |
| FB-MULE-ROPEG Mule rope guide bracket | Mule mast weldment | 2 | 74 | 4 | 70 | 0 | — | — | |
| FB-MULE-STOP Mule carriage stop and buffer | Mule mast weldment | 2 | 74 | 4 | 70 | 0 | — | — | |
| FB-MULE-TOP Mule mast top plate, laser cut 16mm | Mule mast weldment | 1 | 37 | 2 | 35 | 0 | — | — | |
| FB-SM1000-CARRIAGE SM1000 shift carriage | Sidemount SM1000 base weldment | 1 | 13 | 0 | 13 | 0 | — | — | |
| FB-SM1000-FRAME SM1000 base frame weldment | Sidemount SM1000 base weldment | 1 | 13 | 0 | 13 | 0 | — | — | |
| FB-SM1000-LINK SM1000 linkage arm pair | Sidemount SM1000 base weldment | 1 | 13 | 0 | 13 | 0 | — | — | |
| FB-SM1000-MOUNT SM1000 mast mount bracket | Sidemount SM1000 base weldment | 1 | 13 | 0 | 13 | 0 | — | — | |
| FB-SM1000-PINPL SM1000 pin plate set 20mm | Sidemount SM1000 base weldment | 1 | 13 | 0 | 13 | 0 | — | — | |
| FB-SM1000-STAB SM1000 stabiliser foot | Sidemount SM1000 base weldment | 1 | 13 | 0 | 13 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 48 | 428 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Mule mast weldment | 12 | 1554 | 24 | 1530 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | Sidemount SM1000 base weldment | 8 | 920 | 16 | 904 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | Sidemount SM1000 base weldment | 1 | 109 | 2 | 107 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Mule mast weldment | 1 | 110 | 2 | 108 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 48 | 428 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Mule mast weldment | 12 | 1964 | 24 | 1940 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | Sidemount SM1000 base weldment | 8 | 920 | 16 | 904 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Mule mast weldment | 24 | 2640 | 48 | 2592 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | Sidemount SM1000 base weldment | 16 | 1744 | 32 | 1712 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, medium mast | 3 | 472.6 | 36 | 436.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 12 | 117 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, medium mast | 1 | 119 | 12 | 107 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 36 | 340 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 50 | 585 | 0 | — | — | |
| HY-CTRL-CABLE-3 Cable control assembly, 3 lever | Valve bank assembly, Walvoil SD5 4-bank | 1 | 50 | 6 | 44 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 12 | 129 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 4-bank | 14 | 1872 | 186 | 1686 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 54 | 532 | 2 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, medium mast | 6 | 352 | 42 | 310 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 2 | 651 | 59 | 592 | 1 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, medium mast | 2 | 124 | 14 | 110 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 4-bank | 1 | 131 | 12 | 119 | 0 | — | — | |
| HY-FIT-TEE-08 Tee 1/2 | Hose kit, medium mast | 2 | 104 | 14 | 90 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 4-bank | 1 | 84 | 9 | 75 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, medium mast | 4 | 436 | 48 | 388 | 0 | — | — | |
| HY-HOSE-10-2000 Hose 2SN 10 dash, 2000mm, crimped both ends | Hose kit, medium mast | 2 | 104 | 14 | 90 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 336 | 4502 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 12 | 129 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, medium mast | 1 | 166 | 17 | 149 | 1 | — | — | |
| HY-RAM-SIDE-75 Side shift ram 75 x 900 | Sidemount SM1000 base weldment | 1 | 25 | 1 | 24 | 20 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, medium mast | 1 | 111 | 11 | 100 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 12 | 129 | 0 | — | — | |
| HY-VB-WV-SD5-4 Walvoil SD5 4-bank valve, cable control | Valve bank assembly, Walvoil SD5 4-bank | 1 | 45 | 6 | 39 | 24 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | Sidemount SM1000 base weldment | 2 | 282 | 4 | 278 | 2 | — | — | |
| MC-BUSH-40 Bush 40 ID, bronze | Mule mast weldment | 4 | 164 | 8 | 156 | 0 | — | — | |
| MC-PIN-40x220 Pin 40 x 220, hardened | Mule mast weldment | 2 | 318 | 4 | 314 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Ram set, medium mast | 4 | 548 | 46 | 502 | 1 | — | — | |
| PL-BUSH-NYL-40 Nylon bush 40 x 50 | Sidemount SM1000 base weldment | 4 | 128 | 0 | 128 | 0 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Mule mast weldment | 2 | 116 | 4 | 112 | 0 | — | — | |
| PL-INSERT-ADJ-25 Adjustable insert 25mm, threaded | Mule mast weldment | 8 | 464 | 24 | 440 | 0 | — | — | |
| PL-SLIDE-UHMW-M UHMW mast slide, medium, adjustable | Mule mast weldment | 4 | 192 | 8 | 184 | 1 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Mule mast weldment | 2 | 220 | 4 | 216 | 1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Mule mast weldment | 21 | 2755 | 42 | 2713 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Mule mast weldment | 3.5 | 498.2 | 7.6 | 490.6 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, medium mast | 4 | 598 | 58 | 540 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | Sidemount SM1000 base weldment | 0.8 | 87.2 | 1.6 | 85.6 | 1 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | Sidemount SM1000 base weldment | 0.35 | 46 | 0.7 | 45.3 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | Sidemount SM1000 base weldment | 0.25 | 30 | 0.5 | 29.5 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | Sidemount SM1000 base weldment | 2.4 | 327.8 | 4.8 | 323 | 1 | — | — | |
| WR-MULE-PLATE Mule hammer wear plate set | Mule mast weldment | 1 | 37 | 2 | 35 | 0 | — | — | |
| WR-MULE-ROPE Mule hoist rope, cut and swaged | Mule mast weldment | 1 | 37 | 2 | 35 | 0 | — | — | |
| WR-SM1000-HPIN SM1000 hitch pin set | Sidemount SM1000 base weldment | 1 | 13 | 0 | 13 | 0 | — | — | |
| WR-SM1000-TLPIN SM1000 top link pin and clip | Sidemount SM1000 base weldment | 1 | 13 | 0 | 13 | 0 | — | — |