Mule / UltraGlide / Rock Spike Late CustomerQuikFence Australia Pty Ltd
Serialassigned at QC sign-off
MastMule
BaseUltraGlide RS
AttachmentsRock Spike Extractor Kit
Released12 Aug 2026
Final assembly3 Sep 2026
Promised to dealer10 Sep 2026
Failed on the test rig for a weeping fitting and went back to hydraulics.
Convergence date
22 Sep 2026
The last sub-assembly is not ready until 22 Sep 2026, which is 13 working days after final assembly is scheduled to start on 3 Sep 2026. This machine cannot be built on its date.
Critical path
Mule mast weldment
Not started, ready 22 Sep, needed 2 Sep
Onto the assembly bench 23 Sep 2026
Calculated completion 6 Oct 2026
Promised to dealer 10 Sep 2026
Production stages
Currently at stage 3 of 10 since 6 Sep 2026
- Released to production12 Aug
- Steel cut and prep13 Aug
- Fabrication and weld14 Aug
- Machining24 Aug
- Blast and paint27 Aug
- Hydraulic assembly31 Aug
- Final assembly3 Sep
- Test rig9 Sep
- QC sign-off10 Sep
- Ready for despatch11 Sep
Sub-assemblies
Platform
0 of 8 complete and in stores | Sub-assembly | State | Where | Hours | Required by | Ready | Verdict |
|---|---|---|---|---|---|---|
| Mule mast weldment Mast weldment · 6 day build · SA-MW-MULE | Not started | — | 0 / 17.7 | 2 Sep | 22 Sep | 14 days late. Waiting on ST-IB350-200UB to land 15 Sep. |
| UltraGlide RS base weldment Base weldment · 5 day build · SA-BW-UGRS | Not started | — | 0 / 16.3 | 2 Sep | 14 Sep | 8 days late. Not enough days left to build it. |
| Hydraulic pack, standard Hydraulic pack · 2 day build · SA-HP-STD | Not started | — | 0 / 2.5 | 2 Sep | 9 Sep | 5 days late. Not enough days left to build it. |
| Valve bank assembly, Walvoil SD5 4-bank Valve bank · 1 day build · SA-VB-SD5-4 | Not started | — | 0 / 1.2 | 2 Sep | 8 Sep | 4 days late. Not enough days left to build it. |
| Ram set, medium mast Ram set · 1 day build · SA-RS-M | Not started | — | 0 / 1.2 | 2 Sep | 8 Sep | 4 days late. Not enough days left to build it. |
| Hose kit, medium mast Hose kit · 1 day build · SA-HK-M | Not started | — | 0 / 1.5 | 2 Sep | 8 Sep | 4 days late. Not enough days left to build it. |
| Decal and document set, FP Decal set · 1 day build · SA-DS-FP | Not started | — | 0 / 0.5 | 2 Sep | 8 Sep | 4 days late. Not enough days left to build it. |
| Rock Spike Extractor Kit Attachment kit · 3 day build · SA-AK-RSE | Not started | — | 0 / 4.5 | 2 Sep | 10 Sep | 6 days late. Not enough days left to build it. |
1 shortage against this machine
| Item | Short | Cover | |
|---|---|---|---|
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | 5 | 15 Sep |
Value in this job
Standard cost
- Material issued to date
- $0
- Labour booked to date
- $0
- Work in progress
- $0
- Material at standard, complete
- $11,577
- Labour at standard, complete
- $3,100
- Hours booked
- 0 / 67.4
- Sold for
- A$23,688
HARMONiQ costing and stock valuation come from HARMONiQ.
Activity and correspondence
Component requirements
StockNetting
104 lines still to issue against this machine | Component | For | Required | On hand | Allocated ahead | Available | On order | ETA | Shortfall | |
|---|---|---|---|---|---|---|---|---|---|
| ST-IB350-200UB Infrabuild 350 I-beam 200UB22, mill run | Mule mast weldment | 5 | 0 | 0 | 0 | 720 | 15 Sep | 5 | |
| BR-SHEAVE-200 Rope sheave 200mm with bearing | Mule mast weldment | 2 | 116 | 0 | 116 | 0 | — | — | |
| CN-DEGREASE Degreaser, 20L | Machine, at blast and paint | 0.4 | 58 | 0 | 58 | 0 | — | — | |
| CN-DISC-GRIND-125 Grinding disc 125mm | Machine, at blast and paint | 2 | 206 | 0 | 206 | 1 | — | — | |
| CN-FLAP-125 Flap disc 125mm | Machine, at blast and paint | 3 | 424 | 0 | 424 | 1 | — | — | |
| CN-GAS-ARGON Shielding gas, argon mix | Mule mast weldment | 0.5 | 65 | 0 | 65 | 2 | — | — | |
| CN-MASKING Masking tape and paper kit | Machine, at blast and paint | 1 | 138 | 0 | 138 | 0 | — | — | |
| CN-WIRE-MIG-12 MIG wire 1.2mm ER70S-6 | Mule mast weldment | 8.5 | 983 | 0 | 983 | 1.1 | — | — | |
| DC-FP-ULTRAG4 FencePro Ultra G4 decal set | Decal and document set, FP | 1 | 42 | 2 | 40 | 35 | — | — | |
| DC-MANUAL-FP FencePro operator manual and parts book | Decal and document set, FP | 1 | 72 | 2 | 70 | 0 | — | — | |
| DC-PLATE-SER Serial and compliance plate, engraved | Decal and document set, FP | 1 | 150 | 4 | 146 | 1 | — | — | |
| DC-SAFETY-SET Safety decal set, AS/NZS | Decal and document set, FP | 1 | 150 | 4 | 146 | 1 | — | — | |
| DP-CRATE-MAST Mast transport cradle, reusable | Machine, at blast and paint | 0.15 | 16 | 0 | 16 | 0 | — | — | |
| DP-LABEL-SET Despatch label set | Machine, at blast and paint | 1 | 132 | 0 | 132 | 0 | — | — | |
| DP-WRAP-SHRINK Shrink wrap, per roll | Machine, at blast and paint | 0.2 | 24 | 0 | 24 | 0 | — | — | |
| EL-LOOM-STD Wiring loom, standard machine | Machine, at blast and paint | 1 | 126 | 0 | 126 | 1 | — | — | |
| EL-WORKLIGHT LED work light 24W | Machine, at blast and paint | 1 | 103 | 0 | 103 | 0 | — | — | |
| FB-MULE-CARR Mule hammer carriage weldment | Mule mast weldment | 1 | 37 | 0 | 37 | 0 | — | — | |
| FB-MULE-FOOT Mule mast foot plate 20mm | Mule mast weldment | 1 | 37 | 0 | 37 | 0 | — | — | |
| FB-MULE-GUIDE Mule slide guide channel pair | Mule mast weldment | 1 | 37 | 0 | 37 | 0 | — | — | |
| FB-MULE-HEAD Mule mast head weld assembly | Mule mast weldment | 1 | 37 | 0 | 37 | 0 | — | — | |
| FB-MULE-LUG Mule lift lug set | Mule mast weldment | 2 | 74 | 0 | 74 | 0 | — | — | |
| FB-MULE-ROPEG Mule rope guide bracket | Mule mast weldment | 2 | 74 | 0 | 74 | 0 | — | — | |
| FB-MULE-STOP Mule carriage stop and buffer | Mule mast weldment | 2 | 74 | 0 | 74 | 0 | — | — | |
| FB-MULE-TOP Mule mast top plate, laser cut 16mm | Mule mast weldment | 1 | 37 | 0 | 37 | 0 | — | — | |
| FB-RSE-ARM Rock Spike arm weldment | Rock Spike Extractor Kit | 1 | 5 | 0 | 5 | 0 | — | — | |
| FB-RSE-BRKT Rock Spike mounting bracket | Rock Spike Extractor Kit | 1 | 5 | 0 | 5 | 0 | — | — | |
| FB-RSE-CLAMP Rock Spike clamp assembly | Rock Spike Extractor Kit | 1 | 5 | 0 | 5 | 0 | — | — | |
| FB-RSE-GUARD Rock Spike guard and shroud | Rock Spike Extractor Kit | 1 | 5 | 0 | 5 | 0 | — | — | |
| FB-RSE-PLATE Rock Spike backing plate | Rock Spike Extractor Kit | 1 | 5 | 0 | 5 | 0 | — | — | |
| FB-UGRS-CARRIAGE UltraGlide shift carriage | UltraGlide RS base weldment | 1 | 10 | 0 | 10 | 0 | — | — | |
| FB-UGRS-FRAME UltraGlide base frame weldment | UltraGlide RS base weldment | 1 | 10 | 0 | 10 | 0 | — | — | |
| FB-UGRS-LINK UltraGlide linkage arm pair | UltraGlide RS base weldment | 1 | 10 | 0 | 10 | 0 | — | — | |
| FB-UGRS-MOUNT UltraGlide mast mount bracket | UltraGlide RS base weldment | 1 | 10 | 0 | 10 | 0 | — | — | |
| FB-UGRS-PINPL UltraGlide pin plate set 20mm | UltraGlide RS base weldment | 1 | 10 | 0 | 10 | 0 | — | — | |
| FB-UGRS-STAB UltraGlide stabiliser foot | UltraGlide RS base weldment | 1 | 10 | 0 | 10 | 0 | — | — | |
| FS-BOLT-M10-50 Bolt M10 x 50 grade 8.8, zinc | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 12 | 464 | 0 | — | — | |
| FS-BOLT-M12-60 Bolt M12 x 60 grade 8.8, zinc | Rock Spike Extractor Kit | 8 | 752 | 0 | 752 | 0 | — | — | |
| FS-BOLT-M12-90 Bolt M12 x 90 grade 8.8, zinc | Machine, at blast and paint | 8 | 824 | 0 | 824 | 0 | — | — | |
| FS-BOLT-M16-80 Bolt M16 x 80 grade 8.8, zinc | Mule mast weldment | 12 | 1554 | 0 | 1554 | 1 | — | — | |
| FS-BOLT-M20-110 Bolt M20 x 110 grade 8.8, zinc | UltraGlide RS base weldment | 8 | 920 | 0 | 920 | 0 | — | — | |
| FS-KIT-ATT Attachment fastener kit, bagged | Rock Spike Extractor Kit | 1 | 46 | 0 | 46 | 0 | — | — | |
| FS-KIT-BASE Base fastener kit, bagged | UltraGlide RS base weldment | 1 | 109 | 0 | 109 | 0 | — | — | |
| FS-KIT-MAST Mast fastener kit, bagged | Mule mast weldment | 1 | 110 | 0 | 110 | 1 | — | — | |
| FS-NUT-M10 Nyloc nut M10 grade 8 | Valve bank assembly, Walvoil SD5 4-bank | 4 | 476 | 12 | 464 | 0 | — | — | |
| FS-NUT-M12 Nyloc nut M12 grade 8 | Rock Spike Extractor Kit | 8 | 1696 | 0 | 1696 | 0 | — | — | |
| FS-NUT-M16 Nyloc nut M16 grade 8 | Mule mast weldment | 12 | 1964 | 0 | 1964 | 2 | — | — | |
| FS-NUT-M20 Nyloc nut M20 grade 8 | UltraGlide RS base weldment | 8 | 920 | 0 | 920 | 0 | — | — | |
| FS-WASH-M12 Flat washer M12 heavy | Machine, at blast and paint | 16 | 1648 | 0 | 1648 | 0 | — | — | |
| FS-WASH-M16 Flat washer M16 heavy | Mule mast weldment | 24 | 2640 | 0 | 2640 | 1 | — | — | |
| FS-WASH-M20 Flat washer M20 heavy | UltraGlide RS base weldment | 16 | 1744 | 0 | 1744 | 0 | — | — | |
| GS-EDGE-TRIM Edge trim, per metre | Hose kit, medium mast | 3 | 472.6 | 9 | 463.6 | 0 | — | — | |
| GS-GASKET-TANK Tank flange gasket | Hydraulic pack, standard | 1 | 129 | 3 | 126 | 0 | — | — | |
| GS-GROMMET-SET Grommet set, loom | Hose kit, medium mast | 1 | 119 | 3 | 116 | 0 | — | — | |
| GS-MOUNT-RUB-50 Rubber mount 50mm, M12 | Hydraulic pack, standard | 4 | 376 | 8 | 368 | 0 | — | — | |
| GS-ORING-KIT O-ring kit, BSP and JIC | Hydraulic pack, standard | 4 | 635 | 12 | 623 | 0 | — | — | |
| HY-CTRL-CABLE-3 Cable control assembly, 3 lever | Valve bank assembly, Walvoil SD5 4-bank | 1 | 50 | 1 | 49 | 0 | — | — | |
| HY-FILT-RET-10 Return filter 10 micron | Hydraulic pack, standard | 1 | 141 | 3 | 138 | 0 | — | — | |
| HY-FIT-BSP-08 BSP male 1/2 | Valve bank assembly, Walvoil SD5 4-bank | 14 | 1872 | 48 | 1824 | 0 | — | — | |
| HY-FIT-BSP-12 BSP male 3/4 | Hydraulic pack, standard | 4 | 586 | 14 | 572 | 2 | — | — | |
| HY-FIT-EL90-08 90 degree elbow 1/2 | Hose kit, medium mast | 6 | 352 | 12 | 340 | 0 | — | — | |
| HY-FIT-EL90-12 90 degree elbow 3/4 | Hydraulic pack, standard | 2 | 651 | 13 | 638 | 1 | — | — | |
| HY-FIT-QR-08 Quick release coupler 1/2 | Hose kit, medium mast | 2 | 124 | 4 | 120 | 0 | — | — | |
| HY-FIT-RELIEF-210 Relief valve 210 bar | Valve bank assembly, Walvoil SD5 4-bank | 1 | 131 | 3 | 128 | 0 | — | — | |
| HY-FIT-TEE-08 Tee 1/2 | Hose kit, medium mast | 2 | 104 | 4 | 100 | 0 | — | — | |
| HY-FIT-TEST-PT Test point M16 | Valve bank assembly, Walvoil SD5 4-bank | 1 | 84 | 2 | 82 | 0 | — | — | |
| HY-HOSE-08-1600 Hose 2SN 08 dash, 1600mm, crimped both ends | Rock Spike Extractor Kit | 2 | 74 | 0 | 74 | 0 | — | — | |
| HY-HOSE-08-2400 Hose 2SN 08 dash, 2400mm, crimped both ends | Hose kit, medium mast | 4 | 436 | 12 | 424 | 0 | — | — | |
| HY-HOSE-10-2000 Hose 2SN 10 dash, 2000mm, crimped both ends | Hose kit, medium mast | 2 | 104 | 4 | 100 | 0 | — | — | |
| HY-OIL-46 Hydraulic oil ISO 46 | Hydraulic pack, standard | 26 | 4838 | 82 | 4756 | 0 | — | — | |
| HY-PUMP-GEAR-32 Gear pump 32cc, SAE A | Hydraulic pack, standard | 1 | 141 | 3 | 138 | 1 | — | — | |
| HY-RAM-ANGLE-63 Mast angle ram 63 x 350 | Ram set, medium mast | 1 | 166 | 4 | 162 | 1 | — | — | |
| HY-RAM-SIDE-75 Side shift ram 75 x 900 | UltraGlide RS base weldment | 1 | 25 | 0 | 25 | 20 | — | — | |
| HY-RAM-TOP-60 Toplink ram 60 x 400 | Ram set, medium mast | 1 | 111 | 3 | 108 | 1 | — | — | |
| HY-TANK-40L Hydraulic tank 40L with breather | Hydraulic pack, standard | 1 | 141 | 3 | 138 | 0 | — | — | |
| HY-VB-WV-SD5-4 Walvoil SD5 4-bank valve, cable control | Valve bank assembly, Walvoil SD5 4-bank | 1 | 45 | 1 | 44 | 24 | — | — | |
| LF-CHOCK-PAIR Transport chock pair | Machine, at blast and paint | 1 | 115 | 0 | 115 | 0 | — | — | |
| LF-STRAP-50 Ratchet strap 50mm 5t | Machine, at blast and paint | 2 | 286 | 0 | 286 | 0 | — | — | |
| MC-BOSS-PIVOT Pivot boss, line bored | UltraGlide RS base weldment | 2 | 282 | 0 | 282 | 2 | — | — | |
| MC-BUSH-40 Bush 40 ID, bronze | Mule mast weldment | 4 | 164 | 0 | 164 | 0 | — | — | |
| MC-PIN-40x220 Pin 40 x 220, hardened | Mule mast weldment | 2 | 318 | 0 | 318 | 0 | — | — | |
| MC-PIN-50x260 Pin 50 x 260, hardened | Ram set, medium mast | 6 | 548 | 12 | 536 | 1 | — | — | |
| PL-CAP-END-200 Beam end cap 200UB | Mule mast weldment | 2 | 116 | 0 | 116 | 0 | — | — | |
| PL-INSERT-ADJ-25 Adjustable insert 25mm, threaded | Mule mast weldment | 16 | 464 | 0 | 464 | 0 | — | — | |
| PL-SLIDE-UGRS UltraGlide rail slide pad | UltraGlide RS base weldment | 6 | 60 | 0 | 60 | 0 | — | — | |
| PL-SLIDE-UHMW-M UHMW mast slide, medium, adjustable | Mule mast weldment | 4 | 192 | 0 | 192 | 1 | — | — | |
| PL-WEAR-ROPE Rope guide wear block | Mule mast weldment | 2 | 220 | 0 | 220 | 1 | — | — | |
| PT-2K-FPRED Two pack enamel, FencePro red | Machine, at blast and paint | 3.2 | 96.1 | 0 | 96.1 | 79.1 | — | — | |
| PT-GRIT-GARNET Blast garnet 30/60 | Mule mast weldment | 21 | 2755 | 0 | 2755 | 1 | — | — | |
| PT-PRIMER-ETCH Etch primer, two pack | Mule mast weldment | 4.1 | 498.2 | 0 | 498.2 | 1 | — | — | |
| PT-THINNER Two pack thinner | Machine, at blast and paint | 1.1 | 160.1 | 0 | 160.1 | 1 | — | — | |
| SP-LINCH-16 Linch pin 16mm | Ram set, medium mast | 4 | 598 | 14 | 584 | 0 | — | — | |
| ST-BAR-50 Bright bar 50mm | UltraGlide RS base weldment | 0.8 | 87.2 | 0 | 87.2 | 1 | — | — | |
| ST-BAR-75 Bright bar 75mm | Rock Spike Extractor Kit | 1.2 | 6 | 0 | 6 | 0 | — | — | |
| ST-PL-12-350 Plate 12mm grade 350, 2400 x 1200 | UltraGlide RS base weldment | 0.35 | 46 | 0 | 46 | 2 | — | — | |
| ST-PL-16-350 Plate 16mm grade 350, 2400 x 1200 | UltraGlide RS base weldment | 0.25 | 30 | 0 | 30 | 2 | — | — | |
| ST-RHS-150x100 RHS 150 x 100 x 6 | UltraGlide RS base weldment | 2.4 | 327.8 | 0 | 327.8 | 1 | — | — | |
| TR-CERT-FORM Test certificate form set | Machine, at blast and paint | 1 | 132 | 0 | 132 | 0 | — | — | |
| TR-OIL-TEST Test rig oil top up | Machine, at blast and paint | 2 | 230 | 0 | 230 | 0 | — | — | |
| TR-POST-TEST Test post, hardwood, reusable | Machine, at blast and paint | 0.05 | 6 | 0 | 6 | 0 | — | — | |
| WR-MULE-PLATE Mule hammer wear plate set | Mule mast weldment | 1 | 37 | 0 | 37 | 0 | — | — | |
| WR-MULE-ROPE Mule hoist rope, cut and swaged | Mule mast weldment | 1 | 37 | 0 | 37 | 0 | — | — | |
| WR-UGRS-HPIN UltraGlide hitch pin set | UltraGlide RS base weldment | 1 | 10 | 0 | 10 | 0 | — | — | |
| WR-UGRS-TLPIN UltraGlide top link pin and clip | UltraGlide RS base weldment | 1 | 10 | 0 | 10 | 0 | — | — |